MNOSZ 1009-1953 《复印》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M3B83-A2-2014 PRETREATMENT SOLUTION ALUMINUM SUBSTRATE PICKLING ADDITIVE TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M3B83-A3-2014 PRETREATMENT SOLUTION ALUMINUM SUBSTRATE CLEANER TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M3B83-A4-2014 PRETREATMENT SOLUTION ALUMINUM SUBSTRATE PASSIVATION TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M3D170-A2-2005 UNSATURATED POLYESTER (UP) 30% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《30%玻璃纤维增强的不饱和聚酯（UP）片状成型料 与标准FORD WSS-M9.pdf

FORD WSS-M3D173-A4-2004 UNSATURATED POLYESTER (UP) MODIFIED 40% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《40%玻璃纤维增强的不饱和聚酯(UP)改性片状成型料 与标准.pdf

FORD WSS-M3D177-A1-2005 UNSATURATED POLYESTER (UP) 50% LONG GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《50%长玻璃纤维增强的不饱和聚酯（UP）成型料 与标准FORD WSS-M99P.pdf

FORD WSS-M3D178-A1-2005 UNSATURATED POLYESTER (UP) INJECTION MOLDING COMPOUND 14% GLASS FIBER REINFORCED LOW PROFILE TO BE USED WITH FORD WSS-M99P1111-A 《14%玻璃纤维增强的低糙度不饱和聚酯(UP)注塑.pdf

FORD WSS-M3D178-A2-2005 UNSATURATED POLYESTER (UP) INJECTION MOLDING COMPOUND 13% GLASS FIBER REINFORCED EXTERIOR APPLICATIONS TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSS-M.pdf

FORD WSS-M3D178-A3-2014 UNSATURATED POLYESTER (UP) INJECTION MOLDING COMPOUND 14% GLASS FIBER REINFORCED EXTERIOR APPLICATIONS HIGH FILL CONTENT TO BE USED WITH FORD WSS-M99P1111-.pdf