MNOSZ 15923-1953 《提前生产一体式金属混凝土窗尺寸：540x60 cm》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

UNI 5525-1964 Rasps Round rasps 《木锉 圆木锉》.pdf

UNI 5526-1964 Rasps Horse rasps 《铁匠用木锉》.pdf

UNI 5527-1964 Rasps Half-round shoe rasps 《鞋匠用半圆木锉》.pdf

UNI 5528-1964 Rasps Keyhole rasps 《木锉 曲线锯》.pdf

UNI 5538-1965 Textiles tests Test and classification of absorbency 《纺织：试验 亲水性试验和分级》.pdf

UNI 5541-1965 Iso metric screw threads with triangular profile pitch 0 35 mm and more Tollerance system for clearance fits 《三角形间距大于等于0 35mm的ISO公制螺纹 动配合的偏差系统》.pdf

UNI 5542-1965 Iso metric threads with triangular profile Limits of size for threads with diameter from 1 6 to 39 mm 《三角形ISO公制螺纹 螺纹直径为1 6至39mm的尺寸限度》.pdf

UNI 5543-1965 Iso metric threads with triangular profile limits of size for threads with diameter from 40 up to 100 mm 《三角形ISO公制螺纹 螺纹直径为40至100mm的尺寸限度》.pdf

UNI 5544-1965 Iso metric threads with triangular profile Limits of size of the close class threads with 4h5h 4h tolerance for bolts screws and nuts 《三角形ISO公制螺纹 截面uni 5542-65的精密螺纹尺寸.pdf