MNOSZ 19096-1954 《三步设备》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

UNI 6979-1971 Measuring instruments Calliper gauges built-up type for nominal sizes up to 10 mm 《测量工具 标称尺寸10mm以内的光滑可组合凹口轴》.pdf

UNI 6980-1971 Measuring instruments Go and not go calliper gauges singol jaw for nominal sizes above 3 to 100 mm 《测量工具 标称尺寸超过3－100mm的光滑变速单凹口轴》.pdf

UNI 6981-1971 Measuring instruments Go and not go calliper gauges double jaw for nominal sizes above 3 to 100 mm 《测量工具 标称尺寸超过3－100mm的光滑极限双凹口轴》.pdf

UNI 6982-1971 Measuring instruments Setting plugs for adjustable go and not go screw ring gauges for ISO metric threads with nominal diameter above 1 5 to 50 mm 《测量工具 用于ISO公制螺纹的标称直.pdf

UNI 6983-1971 Measuring instruments Setting plugs for adjustable go and not go screw ring gauges for ISO metric threads with nominal diameter above 50 to 70 mm 《测量工具 用于过端螺纹环规和标称直径超.pdf

UNI 6984-1971 Measuring instruments Go and not go screw plug gauges and go and not go check plugs for new solid go and not go screw ring gauges for ISO metric threads with nominal .pdf

UNI 6985-1971 Measuring instruments Go screw plug gauges and go check plugs for new solid go and not go screw ring gauges for ISO metric threads with nominal diameter above 50 to 1.pdf

UNI 6986-1971 Measuring instruments Not go screw plug gauges check plugs for new solid go and not go screw ring gauges and wear check plugs for solid and adjustable go and not go snomi.pdf

UNI 6987-1971 Measuring instruments Not go screw plug gauges and wear check plugs for solid and adjustable go and not go screw ring gauges for ISO metric threads with nominal diame.pdf