MNOSZ 3187-1955 《洗衣机不同圆心雕凿绳索系统》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 65267-1992 Aerospace screws hexagon with MJ thread threaded approximately to head steel nominal tensile strength 900 MPa for temperatures up to 235 C《航空和航天 温度235℃以下、螺纹接近于头部的、标称.pdf

DIN 65268-2011 Aerospace - Hexagon bolts with MJ thread short thread titanium alloy nominal tensile strength 1 100 MPa for temperatures up to 315 C《航空航天 公称抗张强度1 100 MPa 使用温度315℃以下带.pdf

DIN 65269-1987 Aerospace countersunk head screws close tolerance with ribbed TORQ-SET (ACR) recess and MJ thread short thread length steel nominal tensile strength 900 MPa for temp.pdf

DIN 6527-2002 Solid hardmetal end mills with stepped parallel shank - Dimensions《实心硬质合金梯级直柄端铣刀 尺寸》.pdf

DIN 65271-2002 Aerospace series - Elastomeric semi-finished products and parts - Technical specification《航空航天系列 弹性半成品和零件 技术规范》.pdf

DIN 6528-2002 Solid hardmetal end mills with continuous parallel shank - Dimensions《实心硬质合金连续直柄端铣刀 尺寸》.pdf

DIN 65281-2005 Aerospace series - Nuts hexagon thin with MJ thread corrosion-resisting steel classification 1100 MPa 315 C 425 C《航空航天系列 MJ螺纹、耐腐蚀钢制薄型六角螺母 等级 1100MPa 315℃ 425℃》.pdf

DIN 65284-1987 Aerospace countersunk head screws with ribbed TORQ-SET (ACR) recess and MJ thread fully threaded corrosion-resisting steel nominal tensile strength 1100 MPa for temp.pdf

DIN 65285-1987 Aerospace countersunk head screws with ribbed TORQ-SET (ACR) recess and MJ thread short thread length corrosion-resisting steel nominal tensile strength 1100 MPa for.pdf