HB 7144.5-1995 《大型系列组合夹具支承件 三竖槽长方形支承》.pdf

相关资源

HB 7144.5-1995 大型系列组合夹具支承件三竖槽长方形支承.pdf

猜你喜欢

FORD WSK-M4D637-A3-2005 ACETAL (POM) HOMOPOLYMER MELT FLOW RATE 19-32 TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSK-M4D637-A1)《汽车内部用熔体流动速率为19-32的乙缩醛均聚物(POM)着色成型料 与标准FORD WSS.pdf

FORD WSK-M4D637-A4-2005 ACETAL (POM) HOMOPOLYMER MELT FLOW RATE 34-44 TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSK-M4D637-A1)《汽车内部用熔体流动速率为34-44的乙缩醛均聚物(POM)着色成型料 与标准FORD WSS.pdf

FORD WSK-M4D637-A5-2005 ACETAL (POM) HOMOPOLYMER CHEMICALLY LUBRICATED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《以化学方式润滑的乙缩醛共聚物（POM）成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D639-A-2010 POLYBUTYLENE TEREPHTHALATE (PBT) EXTRUSION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚对苯二甲酸丁二醇酯（PBT）挤塑成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D641-A-2006 POLYAMIDE (PA) 66 HEAT STABILIZED 25% GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D653-A)《25%玻璃纤维增强、受热稳定的聚酰胺66 与标准FORD WSS-M99P1.pdf

FORD WSK-M4D642-A-2006 POLYAMIDE (PA) 66 HEAT STABILIZED 30% GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D673-A)《30%玻璃纤维增强、受热稳定的聚酰胺66 与标准FORD WSS-M99P1.pdf

FORD WSK-M4D642-A2-2009 POLYAMIDE (PA) 66 HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用受热稳定、30%玻璃纤维增强的聚酰胺66成型料 .pdf

FORD WSK-M4D642-A3-2006 POLYAMIDE (PA) 66 HEAT STABILIZED 30% GLASS FIBER REINFORCED REDUCED MOISTURE ABSORPTION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D.pdf

FORD WSK-M4D643-A1-2010 POLYPROPYLENE (PP) HOMOPOLYMER 40% MINERAL FILLED MELT FLOW RATE 4 - 7 TO BE USED WITH FORD WSS-M99P1111-A 《熔体流动速率为4-7的40%矿物填充的聚丙烯(PP)均聚物 与标准FORD WSS-M99.pdf