HD 555 26 S1-1990 Specifications for Particular Types of Winding Wires Part 26 Polyamide-Imide Enamelled Round Copper Winding Wire Class 200《特种绕组线规范 第26部分 200级聚.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS 381C-1996 Specification for colours for identification coding and special purposes《识别 编码和专用颜色规范》.pdf

BS 3821-1-1974 Specification for hardmetal dies and associated hardmetal tools - Designation and marking of as-sintered pellets and finished dies《硬质合金模具和配套硬质合金工具规范 第1部分 烧结模坯和精加工模名称.pdf

BS 3821-2-1974 Specification for hardmetal dies and associated hardmetal tools - As-sintered pellets and finished dies for drawing round wire《硬质合金模具和配套硬质合金工具规范 第2部分 拉制圆金属丝用烧结模坯和精加工.pdf

BS 3821-3-1974 Specification for hardmetal dies and associated hardmetal tools - As-sintered pellets and finished dies for drawing round bar《硬质合金模具和配套硬质合金工具规范 第3部分 拉制圆棒材用烧结模坯和精加工模》.pdf

BS 3821-4-1982 Specification for hardmetal dies and associated hardmetal tools - Dimensions and tolerances of as-sintered hardmetal pellets used in heading dies《硬质合金模具和配套硬质合金工具规范 第.pdf

BS 3823-1990 Grading of ash and hickory wood handles for hand tools《手工工具用槐木和山核桃木柄的分级》.pdf

BS 3828-1973 Specification for crystal glass《石英玻璃规范》.pdf

BS 3831-1964 Specification for vitreous enamel finishes for domestic and catering appliances《家用器具和餐具搪瓷精加工规范》.pdf

BS 3837-1-2004 Expanded polystyrene boards - Boards and blocks manufactured from expandable beads - Requirements and test methods《泡沫聚苯乙烯板 可膨胀珠状材料制板材和块材 要求和试验方法》.pdf