LNEC PCA 18-1973 《用图形表示的程序》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ISO 18132-1-2011 Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels - General requirements for automatic tank gauges - Part 1 Automatic ta.pdf

ISO 18132-3-2011 Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels - General requirements for automatic tank gauges - Part 3 Automatic ta.pdf

ISO 18144-2003 Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Method based on solanesol《环境烟草烟气 可吸入的悬浮颗粒物的估测茄呢醇.pdf

ISO 18145-2003 Environmental tobacco smoke - Determination of vapour phase nicotine and 3-ethenylpyridine in air - Gas chromatographic method《环境中的烟草烟雾 空气中蒸气态烟碱和.pdf

ISO 1815-1975 Continuous mechanical handling equipment for loose bulk materials Vibrating feeders and conveyors with tubular trough《松散物料连续搬运设备 管式振动给料机和输送机》.pdf

ISO 1816-1975 Continuous mechanical handling equipment for loose bulk materials and unit loads Belt conveyors Basic characteristics of motorized driving pulleys.pdf

ISO 18175-2004 Non-destructive testing - Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measureme.pdf

ISO 1819-1977 Continuous mechanical handling equipment Safety code General rules《连续搬运设备 安全规则 一般规则》.pdf

ISO 182-1-1990 Plastics determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride .pdf