JC T 2475-2018 泡沫混凝土墙板、屋面板.pdf

相关资源

JC T 2755-2023 精细陶瓷高温比热容试验方法 差示扫描量热法（DSC）.pdf

JC T 60006-2020 瓷砖薄贴法施工技术规程.pdf

JC T 2564-2020 建筑陶瓷行业绿色工厂评价导则.pdf

JC T 60005-2020 抹灰石膏应用技术规程.pdf

JC T 2557-2020 植生混凝土.pdf

JC T 791-2019 轮窑热平衡、热效率测定与计算方法.pdf

JC T 792-2019 隧道式砖瓦干燥室热平衡、热效率测定与计算方法.pdf

JC T 2546-2019 固定式建筑垃圾处置技术规程.pdf

JC T 429-2019 砖瓦工业隧道窑—干燥室体系热效率、单位热耗、单位煤耗计算方法.pdf

JC T 793-2019 隧道式干燥室-轮窑体系热效率、单位热耗、单位煤耗计算方法.pdf

猜你喜欢

GOST 28041-1989 Crossovers section insulators frogs for tramway and trolleybus catenary suspensions General technical requirements《电车和无轨电车接触电线路的交叉点 分段绝缘子和转辙器 一般技术要求》.pdf

GOST 28043-1989 Personal computers Removable heads hard fixed disk drive interface General requirements《个人电子计算机 硬磁盘存储器移动头间的接口 一般要求》.pdf

GOST 28044-1989 Internal broaches for straight splines based at internal diameter one pass combined type Construction《内径定心直齿十键孔用交替切削装配式拉刀 结构》.pdf

GOST 28045-1989 Internal broaches for straight splines based at internal diameter dauble pass combined type Construction《内径定心直齿十键孔用两次拉削成形的交替切削组合拉刀 结构》.pdf

GOST 28046-1989 Internal broaches for straight splines based at internal diameter three pass combined type Construction《内径定心直齿十键孔用三次拉削成型的交替切削装配式组合拉刀 结构》.pdf

GOST 28047-1989 Internal broaches for straight splines based at internal diameter four pass combined type Construction《内径定心直齿十键孔用四次拉削成形的交替切削装配式组合拉刀 结构》.pdf

GOST 28048-1989 Broaches with diameter from 50 to 120 mm for slitting holes with involute profile with round tail and centring at outside diameter with modul frome 1 5 to 2 5 mm Co.pdf

GOST 28049-1989 Broaches with diameter from 90 to 120 mm for slitting holes with involute profile with round tail and centring at outside diameter with modul from 2 5 mm Constructi.pdf

GOST 28050-1989 Broaches with diameter from 55 to 130 mm for slitting holes with involute profile with round tail and centring at outside diameter with modul from 3 to 5 mm Constru.pdf