1、IEEE Guide for the Application of Shunt Reactor Switching Sponsored by the Switchgear Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Power and Energy Society IEEE Std C37.015-2017 (Revision of IEEE Std C37.015-2009) IEEE Std C37.015-2017 (Revision of IEEE Std C37.015-2009) IEEE Guide
2、for the Application of Shunt Reactor Switching Sponsor Switchgear Committee of the IEEE Power and Energy Society Approved 06 December 2017 IEEE-SA Standards Board 2 Abstract: Guidance for the application of ac high-voltage circuit breakers for shunt reactor switching is provided. Overvoltage generat
3、ion for the three cases of shunt reactors being directly grounded, ungrounded, or grounded through a neutral reactor is addressed in terms of derivation and limitation methods. Circuit breaker specification for the purpose and the use of laboratory test results to predict field performance is also c
4、overed by this guide. Keywords: ac high voltage circuit breakers, application, IEEE C37.015, inductive load switching, overvoltages, reignition, shunt reactor switching, small inductive currents The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA C
5、opyright 2018 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 16 March 2018. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectivene
6、ss, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imp
7、ly that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in th
8、e state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or
9、 entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE
10、standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIAB
11、ILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. 4 Translations The IEEE
12、 consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in ac
13、cordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an
14、 individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested p
15、arty, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since
16、IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an in
17、stant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working
18、group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE S
19、tandards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in complianc
20、e with applicable laws, and these documents may not be construed as doing so Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These inc
21、lude both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyr
22、ight to the documents. 5 Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensi
23、ng fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE St
24、andards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. A current IEEE document at any point in time consists
25、of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its c
26、ontents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through t
27、he issuance of amendments, corrigenda, or errata, visit the IEEE Xplore at http:/ieeexplore.ieee.org/ or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata,
28、 if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may re
29、quire use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Le
30、tter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, wit
31、h reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for w
32、hich a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discrimi
33、natory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. 6 Copyright 2018 IEEE. All rights
34、reserved. Participants At the time this IEEE guide was completed, the Revision of C37.015 Working Group had the following membership: Anne Bosma, Chair Arben Bufi Chih Chow Lucas Collette Denis Dufournet Kenneth Edwards Helmut Heiermeier Thomas Keels Hua Ying Liu Neil McCord Daniel Schiffbauer Carl
35、Schuetz Devki Sharma Sushil Shinde Michael Skidmore John Webb Jan Weisker The following members of the individual balloting committee voted on this guide. Balloters may have voted for approval, disapproval, or abstention. Ali Al Awazi Roy Alexander Mauricio Aristizabal Ficheux Arnaud Thomas Barnes W
36、.J. (Bill) Bergman Jean-Marc Biasse Stan Billings Anne Bosma Eldridge Byron Paul Cardinal Chih Chow Lucas Collette Stephen Conrad Michael Crawford Randall Crellin Alireza Daneshpooy Stephen DeRoche Gary Donner Edgar Dullni Kenneth Edwards Gearold O. H. Eidhin Mietek Glinkowski Edwin Goodwin James Gr
37、aham Randall Groves John Harley Helmut Heiermeier Werner Hoelzl Jingxuan Hu William Hurst Todd Irwin Laszlo Kadar James Kinney Boris Kogan Jim Kulchisky Marc Lacroix Chung-Yiu Lam Hua Ying Liu Albert Livshitz John Martin Peter Meyer Charles Morse Thomas Mulcahy Jeffrey Nelson Michael Newman T. W. Ol
38、sen Lorraine Padden Mirko Palazzo Andrew Peterson Iulian Profir Reynaldo Ramos Charles Rogers Thomas Rozek Steven Sano Bartien Sayogo Daniel Schiffbauer Nikunj Shah Devki Sharma Michael Sharp Sushil Shinde Hyeong Sim Michael Skidmore Jeremy Smith Jerry Smith James Stage Wayne Stec James Van De Ligt
39、Roger Verdolin John Vergis Mark Waldron John Wang Paul Wasacz John Webb Jan Weisker Kenneth White Matthew Williford Larry Yonce Richard York Jian Yu Xi Zhu When the IEEE-SA Standards Board approved this guide on 06 December 2017, it had the following membership: Jean-Philippe Faure, Chair Gary Hoffm
40、an, Vice Chair John D. Kulick, Past Chair Konstantinos Karachalios, Secretary Chuck Adams Masayuki Ariyoshi Ted Burse Stephen Dukes Doug Edwards J. Travis GriffithMichael Janezic Thomas Koshy Joseph L. Koepfinger* 7 Copyright 2018 IEEE. All rights reserved. Kevin Lu Daleep Mohla Damir Novosel Ronald
41、 C. Petersen Annette D. Reilly Robby Robson Dorothy Stanley Adrian Stephens Mehmet Ulema Phil Wennblom Howard Wolfman Yu Yuan *Member Emeritus8 Copyright 2018 IEEE. All rights reserved. Introduction This introduction is not part of IEEE Std C37.015-2017, IEEE Guide for the Application of Shunt React
42、or Switching. The following major changes were made to this guide compared to the 2009 version: Clause 4 (limitation of overvoltages) has been compiled into a table (Table 1). A general derivation of the equations associated with shunt reactor switching is given in Annex A (formerly Annex C). Other
43、annexes have been renumbered accordingly. Figures have been added to Annex D (oscillation modes) to illustrate the components that take part in the different oscillations. The calculation example given in Annex E to estimate the overvoltage levels based on laboratory test results has been updated. A
44、nnex H (Overvoltage limitation by means of gapped surge arresters) was removed. The list with “other informative documents” in Annex I (now Annex H) was removed. 9 Copyright 2018 IEEE. All rights reserved. Contents 1. Overview 11 1.1 Scope . 11 1.2 Purpose 11 2. General application conditions . 11 2
45、.1 Maximum voltage for application 11 2.2 Frequency 12 2.3 Shunt reactor load current 12 2.4 Interrupting time 12 2.5 Transient overvoltages . 12 2.6 Fault interrupting capability 12 2.7 Frequency of operation 12 3. Shunt reactor switching conditions . 12 3.1 General 12 3.2 Directly grounded reactor
46、s 13 3.3 Ungrounded reactors 19 3.4 Reactors grounded through a neutral reactor . 23 4. Limitation of overvoltages 26 5. Circuit breaker specification and selection . 28 5.1 General 28 5.2 Circuit breaker specification 28 5.3 Circuit breaker selection 28 5.4 Dielectric withstand capability 30 5.5 In
47、terrupting current rating 30 5.6 Shunt reactor rating . 30 5.7 Shunt reactor current 30 5.8 Load side circuit characteristics . 30 5.9 Overvoltage limitations . 30 5.10 Grounding arrangement . 31 5.11 Interrupting time 31 5.12 Mechanical endurance . 31 5.13 Additional information 31 Annex A (informa
48、tive) General derivation of suppression peak and reignition overvoltages for shunt reactor switching 32 A.1 General 32 A.2 Overvoltages associated with interruption 33 A.3 Derivation of the equations for the general case . 35 Annex B (informative) Shunt reactor characteristics 40 B.1 General 40 B.2
49、Shunt reactors with rated voltages of 52 kV and above 40 B.3 Shunt reactors with a rated voltage below 52 kV 41 Annex C (informative) System and station characteristics . 42 C.1 General 42 C.2 System characteristics . 42 C.3 Station characteristics . 42 10 Copyright 2018 IEEE. All rights reserved. Annex D (informative) Oscillation modes . 43 D.1 General 43 D.2 Load side oscillation . 44 D.3 Reignition oscillation 44 D.4 Interaction between phases . 46 Annex E (informative) Application of laboratory test results to actual shunt reactor installations 48 E.1 Gene
