1、 Guide for Building and Classing Liftboats GUIDE FOR BUILDING AND CLASSING LIFTBOATS 2017 American Bureau of Shipping Incorporated by Act of Legislature of the State of New York 1862 2016 American Bureau of Shipping. All rights reserved. ABS Plaza 16855 Northchase Drive Houston, TX 77060 USA Forewor
2、d Foreword This Guide was developed for the Classification of Liftboats and specifies the requirements for design, construction and survey after construction of the Liftboat (including hull structure, equipment and machinery systems) for use by designers, builders, owners and operators in the offsho
3、re industry. This Guide will become effective immediately after its publication. Changes to Conditions of Classification (1 January 2008) For the 2008 edition, Part 1, Chapter 1, “Scope and Conditions of Classification” was consolidated into a generic booklet, entitled Rules for Conditions of Classi
4、fication Offshore Units and Structures (Part 1) for all units, installations, vessels or systems in offshore service. The purpose of this consolidation was to emphasize the common applicability of the classification requirements in “Part 1, Chapter 1” to ABS-classed offshore units, pipelines, risers
5、, and other offshore structures, and thereby make “Conditions of Classification” more readily a common Rule of the various ABS Rules and Guides, as appropriate. Thus, Part 1, Chapter 1 of this Guide specifies only the unique requirements applicable to liftboats. These supplemental requirements are a
6、lways to be used with the aforementioned Rules for Conditions of Classification Offshore Units and Structures (Part 1). ii ABSGUIDE FOR BUILDING AND CLASSING LIFTBOATS .2017 Table of Contents GUIDE FOR BUILDING AND CLASSING LIFTBOATS CONTENTS PART 1 Conditions of Classification (Supplement to the AB
7、S Rules for Conditions of Classification Offshore Units and Structures) 8 CHAPTER 1 Scope and Conditions of Classification . 9 See also separately published booklet ABS Rules for Conditions of Classification Offshore Units and Structures (Part 1) PART 2 Materials and Welding . 20 (See separately pub
8、lished booklet ABS Rules for Materials and Welding Part 2) PART 3 Hull Construction and Equipment 21 CHAPTER 1 General 25 CHAPTER 2 Hull Structures and Arrangements . 62 CHAPTER 3 Subdivision and Stability 207 CHAPTER 4 Fire Safety Measures . 221 CHAPTER 5 Equipment 229 CHAPTER 6 Testing, Trials and
9、 Surveys During Construction Hull 241 PART 4 Machinery and Systems 253 CHAPTER 1 General 254 CHAPTER 2 Prime Movers . 266 CHAPTER 3 Propulsion and Maneuvering Machinery . 277 CHAPTER 4 Jacking or Other Elevating Systems 315 CHAPTER 5 Pumps and Piping Systems . 328 CHAPTER 6 Fire Extinguishing System
10、s . 393 CHAPTER 7 Electrical Installations 417 CHAPTER 8 Hazardous Area Installations . 544 PART 5 Surveys After Construction . 552 CHAPTER 1 Surveys After Construction 553 ABSGUIDE FOR BUILDING AND CLASSING LIFTBOATS .2017 iii This Page Intentionally Left Blank Notices and General Information Notic
11、es and General Information CONTENTS Introduction . 2 TABLE 1 Applicable Editions of Booklets Comprising 2017 Liftboat Guide . 3 TABLE 2 Division and Numbering of this Guide 3 Change Notice (2017) . 4 TABLE 3 Summary of Changes from the 2016 Guide . 4 ABSGUIDE FOR BUILDING AND CLASSING LIFTBOATS .201
12、7 1 Notices and General Information Introduction 1. The year 2017 edition of the Guide for Building and Classing Liftboats consists of the seven (7) booklets as shown in Table 1. With regard to two booklets, Part 1, and Part 2: a) The purpose of the generic title ABS Rules for Conditions of Classifi
13、cation Offshore Units and Structures (Part 1) is to reflect the expanded contents of PART 1, as a result of including consolidated requirements for “Classification” applicable to all types of and sizes of units, installations, vessels or systems in offshore service, etc., as specified in the Forewor
14、d to Part 1. Additional specific requirements are contained in Part 1 of this Guide for Building and Classing Liftboats. b) The purpose of the generic title ABS Rules for Materials and Welding of PART 2 is to emphasize the common applicability of the requirements to ABS-classed vessels, other marine
15、 structures and their associated machinery, and thereby make PART 2 more readily a common “PART” of various ABS Rules and Guides, as appropriate. 2. The numbering system applied in the Rules is shown in Table 2. 3. The primary changes from the 2016 edition of the Guide are identified and listed in T
16、able 3. The effective date of the indicated Rule Changes is 1 January 2017, unless specifically indicated otherwise. 4. The effective date of each technical change since 1993 is shown in parenthesis at the end of the subsection/paragraph titles within the text of each Part. Unless a particular date
17、and month are shown, the years in parentheses refer to the following effective dates: (2000) and after 1 January 2000 (and subsequent years) (1996) 9 May 1996 (1999) 12 May 1999 (1995) 15 May 1995 (1998) 13 May 1998 (1994) 9 May 1994 (1997) 19 May 1997 (1993) 11 May 1993 For certain changes that hav
18、e a major impact on shipyards, designers and vendors, ABS has instituted a two-year Rule cycle to give the industry more time to prepare for these changes. The text of these changes will appear in a box along with the effective date just under the existing requirement. 5. Until the next edition of t
19、he Guide for Building and Classing Liftboats is published, Notices and/or Corrigenda, as necessary, will be published on the ABS website www. eagle.org only, and will be available free for downloading. It is not intended to publish hard copies of future Notices and/or Corrigenda to existing Rules or
20、 Guides. The consolidated edition of the Guide for Building and Classing Liftboats, which includes Notices and/or Corrigenda using different colors for easy recognition, will be published on the ABS website only when Notices and/or Corrigenda are issued. 6. The listing of CLASSIFICATION SYMBOLS AND
21、NOTATIONS is available from the ABS website www.eagle.org for download. 2 ABSGUIDE FOR BUILDING AND CLASSING LIFTBOATS .2017 Notices and General Information TABLE 1 Applicable Editions of Booklets Comprising 2017 Liftboat Guide Guide for Building and Classing Liftboats Notices and General Informatio
22、n 2017 Part 1: Conditions of Classification (Supplement to the ABS Rules for Conditions of Classification Offshore Units and Structures) (1)2017 Part 3: Hull Construction and Equipment 2017 Part 4: Machinery and Systems 2017 Part 5: Surveys After Construction 2017 Rules for Conditions of Classificat
23、ion Offshore Units and Structures not included (1,2)Part 1: Rules for Conditions of Classification Offshore Units and Structures 2017 Rules for Materials and Welding not included (2)Part 2: Rules for Materials and Welding 2017 Notes: 1 The requirements for conditions of classification are contained
24、in the separate, generic ABS Rules for Conditions of Classification (Part 1). Additional specific requirements are contained in Part 1 of these Rules. 2 The latest edition of these Rules is to be referred to. These Rules may be downloaded from the ABS website at www.eagle.org, Rules and Guides, Down
25、loads or may be ordered separately from the ABS Publications online catalog at www.eagle.org, Rules and Guides, Catalog. TABLE 2 Division and Numbering of this Guide Division Number Part Part 1 Chapter Part 1, Chapter 1 Section Section 1-1-1 Subsection (see Note 1) 1-1-1/1 Paragraph (see Note 1) 1-1
26、-1/1.1 Subparagraph 1-1-1/1.1.1 Item 1-1-1/1.1.1(a) Subitem 1-1-1/1.1.1(a)i) Appendix Appendix 1-1-A1 or Appendix 1-A1-1 Note: 1 An odd number (1, 3, 5, etc.) numbering system is used for the Guide. The purpose is to permit future insertions of even-numbered paragraphs (2, 4, 6, etc.) of text and to
27、 avoid the necessity of having to renumber the existing text and associated cross-references, as applicable, within the Guide and associated process instructions, check sheets, etc. ABSGUIDE FOR BUILDING AND CLASSING LIFTBOATS .2017 3 Notices and General Information Change Notice (2017) TABLE 3 Summ
28、ary of Changes from the 2016 Guide EFFECTIVE DATE 1 July 2016 shown as (1 July 2016) (based on the contract date for new construction between builder and Owner) Part/Para. No. Title/Subject Status/Remarks PART 3 Hull Construction and Equipment 3-2-13/1.1 Application To align the requirements with th
29、e updated IACS UR S10, which includes the improvements introduced by IACS in the Common Structural Rules for Bulk Carriers. (Incorporates Notice No. 1) 3-2-13/Table 1B Coefficient kc for High-Lift/ Performance Rudders To align the requirements with the updated IACS UR S10, which includes the improve
30、ments introduced by IACS in the Common Structural Rules for Bulk Carriers. (Incorporates Notice No. 1) 3-2-13/7.4 Rudder Trunk and Rudder Stock Sealing To align the requirements with the updated IACS UR S10, which includes the improvements introduced by IACS in the Common Structural Rules for Bulk C
31、arriers. (Incorporates Notice No. 1) 3-2-13/Figure 2 (New) Fillet Shoulder Radius To align the requirements with the updated IACS UR S10, which includes the improvements introduced by IACS in the Common Structural Rules for Bulk Carriers. (Incorporates Notice No. 1) 3-2-13/9.3.3 (New) Joint between
32、Rudder Stock and Coupling Flange To align the requirements with the updated IACS UR S10, which includes the improvements introduced by IACS in the Common Structural Rules for Bulk Carriers. (Incorporates Notice No. 1) 3-2-13/Figure 3 (New) Welded Joint Between Rudder Stock and Coupling Flange To ali
33、gn the requirements with the updated IACS UR S10, which includes the improvements introduced by IACS in the Common Structural Rules for Bulk Carriers. (Incorporates Notice No. 1) 3-2-13/9.5.1 Coupling Bolts To align the requirements with the updated IACS UR S10, which includes the improvements intro
34、duced by IACS in the Common Structural Rules for Bulk Carriers. (Incorporates Notice No. 1) 3-2-13/9.5.3 (New) Joint between Rudder Stock and Coupling Flange To align the requirements with the updated IACS UR S10, which includes the improvements introduced by IACS in the Common Structural Rules for
35、Bulk Carriers. (Incorporates Notice No. 1) 3-2-13/11.1 Coupling Taper To align the requirements with the updated IACS UR S10, which includes the improvements introduced by IACS in the Common Structural Rules for Bulk Carriers. (Incorporates Notice No. 1) 3-2-13/11.3 Keyed Fitting To align the requir
36、ements with the updated IACS UR S10, which includes the improvements introduced by IACS in the Common Structural Rules for Bulk Carriers. (Incorporates Notice No. 1) 3-2-13/11.5 Keyless Fitting To align the requirements with the updated IACS UR S10, which includes the improvements introduced by IACS
37、 in the Common Structural Rules for Bulk Carriers. (Incorporates Notice No. 1) 3-2-13/13.1 General To align the requirements with the updated IACS UR S10, which includes the improvements introduced by IACS in the Common Structural Rules for Bulk Carriers. (Incorporates Notice No. 1) 3-2-13/13.3 Diam
38、eter To align the requirements with the updated IACS UR S10, which includes the improvements introduced by IACS in the Common Structural Rules for Bulk Carriers. (Incorporates Notice No. 1) 3-2-13/13.4 (New) Push-up Pressure and Push-up Length To align the requirements with the updated IACS UR S10,
39、which includes the improvements introduced by IACS in the Common Structural Rules for Bulk Carriers. (Incorporates Notice No. 1) 4 ABSGUIDE FOR BUILDING AND CLASSING LIFTBOATS .2017 Notices and General Information Part/Para. No. Title/Subject Status/Remarks 3-2-13/15.1.5 (New) Liners and Bushes To a
40、lign the requirements with the updated IACS UR S10, which includes the improvements introduced by IACS in the Common Structural Rules for Bulk Carriers. (Incorporates Notice No. 1) 3-2-13/15.3 Rudder Carrier To align the requirements with the updated IACS UR S10, which includes the improvements intr
41、oduced by IACS in the Common Structural Rules for Bulk Carriers. (Incorporates Notice No. 1) 3-2-13/Table 6 Allowable Bearing Surface Pressure To align the requirements with the updated IACS UR S10, which includes the improvements introduced by IACS in the Common Structural Rules for Bulk Carriers.
42、(Incorporates Notice No. 1) 3-2-13/17.3 Side, Top and Bottom Plating To align the requirements with the updated IACS UR S10, which includes the improvements introduced by IACS in the Common Structural Rules for Bulk Carriers. (Incorporates Notice No. 1) 3-2-13/17.5 Diaphragm Plates To align the requ
43、irements with the updated IACS UR S10, which includes the improvements introduced by IACS in the Common Structural Rules for Bulk Carriers. (Incorporates Notice No. 1) 3-2-13/17.7 (New) Connections of Rudder Blade Structure with Solid Parts To align the requirements with the updated IACS UR S10, whi
44、ch includes the improvements introduced by IACS in the Common Structural Rules for Bulk Carriers. (Incorporates Notice No. 1) 3-2-13/Figure 6 (New) Cross-section of the Connection Between Rudder Blade Structure and Rudder Stock Housing To align the requirements with the updated IACS UR S10, which in
45、cludes the improvements introduced by IACS in the Common Structural Rules for Bulk Carriers. (Incorporates Notice No. 1) 3-2-13/Table 7 (New) Thickness of Side Plating and Vertical Diaphragm Plates To align the requirements with the updated IACS UR S10, which includes the improvements introduced by
46、IACS in the Common Structural Rules for Bulk Carriers. (Incorporates Notice No. 1) 3-2-13/17.9 (New) Welding and Design Details To align the requirements with the updated IACS UR S10, which includes the improvements introduced by IACS in the Common Structural Rules for Bulk Carriers. (Incorporates N
47、otice No. 1) 3-2-13/17.11 Watertightness To align the requirements with the updated IACS UR S10, which includes the improvements introduced by IACS in the Common Structural Rules for Bulk Carriers. (Incorporates Notice No. 1) 3-2-A1/9 (New) Rudders Supported by a Horn Arranged with Two Pintles (Supp
48、orts) To align the requirements with the updated IACS UR S10, which includes the improvements introduced by IACS in the Common Structural Rules for Bulk Carriers. (Incorporates Notice No. 1) 3-2-A1/Figure 4 (New) Rudder Supported by a Horn Arranged with Two Pintles (Supports) To align the requiremen
49、ts with the updated IACS UR S10, which includes the improvements introduced by IACS in the Common Structural Rules for Bulk Carriers. (Incorporates Notice No. 1) 3-2-14/9.3.1 Coaming Construction To align the requirements with the ABS OSV Rules. (Incorporates Notice No. 1) PART 4 Machinery and Systems 4-7-2/11.1 Power Supply Feeders To align the requirements with IACS UI SC242. (Incorporates Notice No. 1) 4-7-3/3.7.5 Maintenance Schedule of Batteries To align the requirements with the updated IACS UR E18, which clearly defines the stages for submitting the Ma
