1、AECMA STANDARD NORME AECMA AECMA NORM prEN 3646-009 Edition P 1 November 2001 PUBLISHED BY THE EUROPEAN ASSOCIATION OF AEROSPACE INDUSTRIES - STANDARDIZATION (AECMA-STAN) Gulledelle 94 - 8-1200 BRUXELLES - Tel. (+32) 2 775 8110 - Fax. (+32) 2 775 8111 ICs: 49.060 Descriptors: Aeronautical industry,
2、aircraft equipment, electrical connection unit, electrical connector, characteristics marking ENGLISH VERSION Aerospace series Connectors, electrical, circular, bayonet cou pl i ng , operating temperature 175 OC or 200 OC continuous Part 009: Protective cover for receptacle Product standard Srie aro
3、spatiale Luft- und Raumfahrt Connecteurs lectriques circulaires Elektrische Rundsteckverbinder accouplement par baonnettes, temprature dutilisation 175 “C ou 200 “C continu Partie O09 : Bouchon de vol pour embase mit Bajonettkupplung, Betriebstemperatur 175 “C oder 200 “C konstant Teil 009: Schutzka
4、ppe fr festen Steckverbinder Norme de produit Produ ktnorm This Yerospace Series“ Presfandard has been drawn up under fhe responsibilify of AECMA-STAN (The European Associafion of Aerospace Indusfries - Sfandardizafion). If is published on green paper for fhe needs of fhe European Aerospace Indusfry
5、. If has been fechnically approved by fhe experts of fhe concerned Domain following member commenfs. Subsequenf fo fhe publicafion of fhis Presfandard, fhe fechnical confenf shall nof be changed fo an exfenf fhaf inferchangeabilify is affecfed, physically or funcfionally, wifhouf re-idenfificafion o
6、f fhe sfandard. Affer examinafion and review by users and formal agreemenf of AECMA-STAN if will be submiffed as a draff European Sfandard fo CEN (European Commiffee for Sfandardizafion) for formal vofe. Nota - Extra copies can be supplied by B.N.A.E. - Technopolis 54 - 199, rue Jean-Jacques Roussea
7、u - 92138 ISSY-LES-MOULINEAUX CEDEX I I I Edition approved for publication Comments should be sent within six months after the date of publication to 2001-11-30 AECMA-STAN Gulledelle 94 8-1200 BRUXELLES Electrical Domain Mr Pezzetta I I I I 0 aecma 2001 Copyright Association Europeene des Constructe
8、urs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 2 prEN 3646-009: 2001 Blank page Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AE
9、CMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 3 prEN 3646-009: 2001 1 Scope This standard defines the characteristics of protective covers for receptacles in the family of bayonet coupling circular connectors, intended for use in an operating temperature
10、range of - 65 “C to 175 “C or 200 “C continuous. It applies to models defined in table 2. For receptacles associated with these protective covers, see EN 3646-003 to EN 3646-007. 2 Norm ative references This European Standard incorporates by dated or undated reference, provisions from other publicat
11、ions. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision.
12、For undated references the latest edition of the publication referred to applies. EN 3646-001 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 “C or 200 “C continuous - Part O01 : Technical specification 1) EN 3646-002 Aerospace series - Connectors, el
13、ectrical, circular, bayonet coupling, operating temperature 175 “C or 200 “C continuous - Part 002: Specification of performance and contact arrangements 1) EN 3646-003 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 “C or 200 “C continuous - Part 003
14、: Receptacle, square flange mounting - Product standard 1) EN 3646-007 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 “C or 200 “C continuous - Part 007: Receptacle, hermetic, round flange, welding or brazing mounting - Product standard 1) 3 Terminol
15、ogy See EN 3646-001. 1) Published as AECMA Prestandard at the date of publication of this standard Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page
16、 4 prEN 3646-009: 2001 Housing size 4 Required characteristics D + 0,lO - 0,15 4.1 Dimensions, mass See figure 1 and table 1. Dimensions and tolerances are in millimetres, they apply after surface treatment. Interface dimensions, see EN 3646-001. F min. Code0 - at tachment $I 4.20 f 0.30 Code C a tt
17、achrnent G H L R Mass g max. max. max. min. max. Key 1 Seal 95,25 Figure 1 Table 1 35,33 32,15 22 38,89 35,33 27 42,06 38,50 29 22,22 45,14 15,75 41,68 34 24 I 3,73 69,85 4 23,512 kl I 14,68 I 8 I I 82,55 I 21,44 14,27 1- 28,98 Copyright Association Europeene des Constructeurs de Materiel Aerospatia
18、l Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 5 prEN 3646-009: 2001 Description block COVER, ELECTRICAL CONNECTOR 4.2 Material and surface treatment See table 2. Identity block EN 3 646A3-0 4.3 Main general character
19、istics See EN 3646-002. 4.4 See EN 3646-002. Possible combinations of protective covers and connectors 5 Designation EXAMPLE : NOTE If necessary, the code 19005 shall be placed between the description block and the identity block. Table 2 - Protective cover models Model I Description A Protective co
20、ver for receptacle in black anodized aluminium alloy - Maximum operating temperature 200 “C continuous RS Protective cover for receptacle in nickel-plated aluminium alloy - Maximum operating temperature 200 “C continuous ws Protective cover for receptacle in olive green cadmium nickel-plated alumini
21、um alloy - Maximum temperature 175 “C continuous Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 6 prEN 3646-009: 2001 6 Marking Unless there are
22、other specific contractual requirements, the marking shall include 6.1 Marking on the product - the manufacturers part number corresponding to the identity block as defined in 5; - the date of manufacture (year, week); - the manufacturers name or trade mark. 6.2 Marking on the individual packaging -
23、 the identity block as defined in 5; - the corresponding manufacturers part number; - the date of manufacture (year, week); - the manufacturers name or trade mark. 7 Technical specification See EN 3646-001. Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
