AIA NAS 388-1947 Screw-82 Degree Oval Recessed Head-Mach (Coarse & Fine Thread) R(1990).pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 2199-1992 二板式矩形橡胶压模标准模架.pdf

HB 2211-1992 导柱.pdf

HB 2242-1976 样板及校对样板检验HB2244-76槽铣刀用.pdf

HB 2243-1976 样板及校对样板检验HB2245-76槽铣刀用.pdf

HB 2244-1976 铣中心钻槽用槽铣刀D=30~60mm.pdf

HB 2245-1976 铣带导柱端面扩孔钻槽用槽铣刀D=30~55mm.pdf

HB 2284-1976 孔加工工序间用的机用铰刀标记代号和公差.pdf

HB 2285-1976 通孔用五棱直柄机用铰刀D=1~2.8mm.pdf

HB 2286-1976 通孔用单齿直柄机用铰刀D=1~2.8mm.pdf