1、 - /;rr A-A-50747 LO W 7777774 0041772 7 W O 5d 3 7-4s A-A-50747 COMMERCIAL ITEM DESCRIPTION 6 May 1987 POUCH, AMMUNITION MAGAZINE, 9MM The General Services Administration has authorized the use of this commercial itan description. scope : -I_ This commercial item description covers one type and siz
2、e of ammunition pouch. The pouch is designed to accommodate one 15 round ammunition magazine for the Ng, 9MM, PDW. Amlicable Documents: Standards: FED-STD-75 1 Stitches, Seams and Stitching FED-STD-595 MIL-STD-I30 Color, Requirements for Individual Color Chips, 3x5 Identification marking of U.S, Mil
3、itary property Drawings : Dwg 20B, Pouch, .!unition Magazine, 9MM Drawings available through the contracting activity from Warner Robins, Robins AFB, GA 31096-5609 WR-ALC Salient.Characteristics: A government furnished 9m magazine shall be capable of properly fitting within the pouch. inserting a lo
4、aded magazine (one round minimum). effort. the pouch. drawing. There shill be no friction between tne magazine and the pouch when Inserting should be without Failure shall occur if the magazine fails to enter or is forced into The pouch shall comply with the requirements as defined in the Flap Faste
5、ner: The flap fastener shall function properly (open & closing freely), while pro- viding secure retention of the magazine. Belt Loop Fastene?: - The belt loop fastener shall function properly (open and close unidirection- ally). Serviceability: -Y_- The pouch shall not show evidence of loosening of
6、 st-itches, breaking of thread and cracking DISTRIBUTION STATEMENT A. Approved for public release: distribution is unlimited. THIS DOCUMENT CONTAINS 3 PAGES. f FSC 1095 -I_- Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-_ A-A-507117 LO m 7777774 00
7、113973 7 m A-A-5074 7 Color : Pouch shall be black and conform to color number 27038 of FED-STD-595. Identification Marking: . -I_. Each Pouch shall be indelibly marked with the letters lU.S.ll, part number, NSN, manufacturer nane and FSCM code. be in the size and location indicated on the applicabl
8、e drawing. Markings shall conform to MIL-STD-I30 and WorkmanshiD: Pouches shall be free of dust, grease, corrosion and other foreign matter. finished pouches shall conform to the quality of product established by this document and as called out in the contract or order. The Stitches : - All stitches
9、 and seams shall conform to FED-STD-751, stitch type 301, 5 to 7 stitches per inch. Repairs of Type 301 Stitching: - Repairs of type 301 stitching shall be as follows: a. When thread breaks or bobbin run-outs occur during stitching, the stitching shall be repaired by restarting tine stitching a mini
10、mum of two stitches back of the end stitching. b. Thread breaks or one or more consecutive skipped or run-off stitches noted during inspection of the item (in process or end item) shall be repaired by overstitching. The stitching shall start a minimum of two stitches in back of the defective area, c
11、ontinue a minimurn of two stitches beyond the defective area onto the existing stitching. Loose stitching shall be repaired by moving the defective stitching without damaging tne materials and restitching in the required manner. made needle holes, c. When making the above repairs, stitches shall ent
12、er and exit previously Thread Ends: - All thread ends shall be trimmed to 1/8 inch maximum length. Certification: I The contractor shall certify that the product offered meets the salient charac- teristics of this description, and that the product conforms to the producers own drawings, specificatio
13、ns, standards, and quality assurance practices, and is the same product offered for sale in the commercial market place. business that cannot offer products with established commercial market accept- ability, may compete by submission of bid samples. the rights to require proof of such confortnance
14、before first delivery and there- after as may be otherwise provided for under the provisions of the contract.) Small (The government reserves -2- - Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-507Lt7 LO 7777774 OOLt3974 O W A-A-5 O 7 4 7 Packa
15、ging -,-,-l- Packing and Marking: The items shall be packaged in accordance with normal comercial practice and packed to assure acceptance by comon carrier and provide product protection against loss and damage during multiple shipments, handling, and storage. shipping container shall be in complian
16、ce with national motor freight classifi- cation and uniform frUight classification. as specified in the contract order. The Shipping container shall be marked Known Acceptable Product: The following product(s) are known to meet the requirements of this CID: FSCM Manufacturer Model NSN - 50905 BI ANCHI Gl5 1095-01-220-0691 Custodian: Air Force - 99 Army - AR Preparing Activity: Air Force - 84 Agent : Air Force - 99 Navy - OS . Project No. 1095-0229 ,- -3- Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
