1、A-A-Lq53A 9999974 OL450bb TL INCH-POUND A-A- 195 3A Julv 15, 1993 SUPERSEDING A-A-195 3 October 27, 1982 COMMERCIAL ITEM DESCRIPTION PEELER, POTATO, HAND The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specification MIL-P-2
2、0583 which has been canceled. 1. SCOPE 1.1 Scope. This commercial item description covers a hand potato peeler formed from corrosion-resisting steel. 2. APPLICABLE DOCUMENTS 2.1 The documents referenced in this commercial item description shall be the issues in effect on the date of issuance of the
3、invitation for bids or request for proposals unless otherwise specified. These documents form a part of this commercial item description to the extent specified. between this commercial item description and a document referenced herein, this commercial item description shall take precedence. In the
4、event of a conflict Federal Standard: FED-STD-376 - Preferred Metric Units for General Use by The Federal Government. Copies of Federal standards are available from the General Services Administration Business Service Centers in Boston, MA; New York, NY; Philadelphia, PA; Washington, DC; Atlanta, GA
5、; Chicago, IL; Kansas City, MO; Fort Worth, TX; Denver, CO; San Francisco, CA; Seattle, WA, and the GSA Specifications Unit (3FB-W), Suite 8100, 470 E. LEnfant Plaza, S.W., Washington, DC 20407. Beneficial comments, recommendations, additions, deletions, clarifications, etc., and any other data whic
6、h may improve this document should be sent to: General Services Administration, Engineering Group (7FXEE), 819 Taylor Street, Fort Worth, TX 76102. DISTRIBUTION STATEMENT A : Approved for public release; distribution is unlimited. FSC 7330 Licensed by Information Handling ServicesA-A-1953A = 9999974
7、 OL450b7 955 A-A- 19 5 3A Militarv Standard: MIL-STD-105 - Sampling Procedures and Tables for Inspection by Attributes. Copies of military standards may be obtained from Standardization Documents Order Desk, Bldg. 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. ASTM Standard: E 29 - Standard Pr
8、actice For Using Significant Digits in Test Data to Determine Conformance with Specifications. Application for copies of ASTM standards should be addressed to ASTM, 1916 Race Street, Philadelphia, PA 19103. 3. SALIENT CHARACTERISTICS 3.1 Material. The potato peeler shall be constructed from a suitab
9、le corrosion-resisting steel. 3.2 Desiqn and construction. The potato peeler shall be of the general design as shown on figure 1. The figure, except for dimensional limits, is for illustrative purposes and not intended to preclude any commercial design otherwise conforming to the requirements of thi
10、s commercial item description (Cid). 3.3 Blade. The blade shall have a cutting edge measuring 1-3/4 inches (4.4 cm) , +5/16 inch (0.8 cm) , -0 inch, in length. The blade shall be heat treated to a Rockwell C hardness of not less than 47 or greater than 55. The blade shall be securely attached to the
11、 stem, or to the yoke when the alternate handle and yoke design is used (see Figure 1). The stem and blade assembly or the blade, when the alternate handle and yoke design is used, shall move freely in the handle and the yoke shall prevent complete rotation of the blade. 3.4 Workmanship. The peeler
12、shall be free from sharp edges (except for the cutting surfaces), slivers, burrs, deep scratches, pits, and tool marks. The peeler shall not be bent, damaged, or distorted. There shall be no defects which impair the durability, appearance, or serviceability of the item. 3.5 Resulatorv reauirements.
13、The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580, as 1 amended, to the maximum extent practicable. 4 3.6 Measurement system. The values stated in inch-pound units are to be regarded as the standard. The values stated in parentheses are for informat
14、ional purposes only. 2 Licensed by Information Handling ServicesA-A-3953A = 9999974 O345068 893 A-A- 19 53A 0 3.7 Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, providing they fall within tolerances spe
15、cified using conversion tables contained in the latest revision of FED- STD-376, and all other requirements of this document are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch-pound units, a request should be made to the specif
16、ication preparing activity for changes to this document. t f 3.8 Commercial item. The use of the term “commercial item description“ in this document does not imply that any item or items offered are not required to conform with all requirements specified herein, 4. QUALITY ASSURANCE PROVISIONS 4.1 C
17、ontractor certification. The contractor shall certify that the potato peeler meets the salient characteristics and the requirements of this commercial item description, and, except for any government unique requirements specified, conforms to the producers own drawings, specifications, standards, an
18、d quality assurance practices, and is the same product offered for sale in the commercial marketplace, or is the same product that has been successfully been delivered to the government on a previous contract or purchase order. The government reserves the right to require proof of such conformance p
19、rior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract. 4.2 Responsibilitv for insDection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specif
20、ied herein. Except as otherwise specified in the contract or purchase order, the contractor may use hic own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. right to perform any of the inspections set forth in
21、 the specification where such inspections are deemed necessary to assure that supplies and services conform to prescribed requirements. The Government reserves the 4.3 Sampling. The levels of inspection and acceptable quality levels (AQLs) shall be in accordance with MIL-STD-105. 4.4 Lot formation.
22、All peelers from the same manufacturer offered for delivery at one time shall be considered a lot for purposes of inspection. i 4.5 Samplins for visual and dimensional examination. A random sample of peelers shall be selected from each lot in accordance with inspection level S-4, AQL 4.0 expressed i
23、n terms of defects per hundred units (dhu). The sample unit shall be one peeler. e 3 Licensed by Information Handling ServicesA-A-3953A 9939974 0345069 728 W A-A-1953A The sample peeler shall be visually and dimensionally examined to verify compliance with table I and the remainder of this commercia
24、l item description. All dimensions are absolute as defined in ASTM E 29. TABLE I. Classification of defects Examine Defect Finish Area of corrosion, stain or discoloration Not as specified Construction Scratch or tool mark i/ Workmanship rough tool or die mark, or burr Any component fractured, split
25、, bent, buckled, Punctured or otherwise impaired and Any sharp edge (except for cutting edge, sliver, I/ - An unacceptable scratch is one that will catch a fingernail when run across it. 4.6 Examination for preparation for deliverv. A random sample of chipping containers shall be selected from each
26、lot for examination of the unit, intermediate, and shipping containers (as applicable) for conformance with the packaging, packing, and marking required in the contract or order. Samples shall be selected in accordance with inspection level S-2, AQL 6.5 (dhu). 5. PREPARATION FOR DELIVERY 5.1 Packasi
27、ns. D ackins, and markinq. The packaging, packing, and marking shall be as specified in the contract or order. 6. NOTES 6.1 Orderins data. Purchasers should include the following information in procurement documents (if applicable). a. Title, number, and date of this commercial item b. The packaging
28、, packing, and marking required. description. i i 6.2 National Stock Number. The following NSN corresponds to this Cid: 7330-00-238-8316. 4 Licensed by Information Handling ServicesA-A-1953A 9999974 0145070 44T A-A- 19 5 3A MILITARY INTERESTS : Military Coordinatina Activitv: Custodians: Army - GL N
29、avy - SA Air Force - 99 Civil Aaencv Coordinatins Activity: VA - OSS Review Activities: PreDarins Activity: Army - MD, QM Air Force - 84, 50 User Activitv: GSA - FSS (DoD Project Number 7330-0655) Navy - MC 5 Licensed by Information Handling ServicesA-A-3953A 9999974 0345073 386 A-A-19 5 3 A - Altem
30、ete Hand and Yoke Design FIGURE 1 - PEELER, POTATO, HAND 6 Licensed by Information Handling ServicesA-A-1953A 9999974 0345072 212 (1 A-A-1953A FIGURE 1 (Conte) - PEELER, POTATO, HAND Metric Units 7 Licensed by Information Handling ServicesA-A-1953A 9999974 0345073 159 A-A- 19 5 3 A Metric Unit Dimensions: A- B- c- D- E- F- G- H- I- J- K- L- 1.1 mm, i 0.1 mm 0.8 mm, f 0.1 mm 3.2 mm 11-1 mm, k 1.6 mm 11.1 mm 26.2 mm 5.6 mm 1-3 mm 23.8 mm 21.4 mm 152.4 i, + 12.7 m, - 1.6 liii 44.5 m, + 7.9 mm, - o 8 i 1 Licensed by Information Handling Services
