1、 AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET LAPEL BUTTON, SUPERIOR CIVILIAN SERVICE AWARD, ARMY This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specifi
2、cation sheet and the latest issue of MIL-DTL-11484. MATERIAL: Red Brass FINISH: Brass, Oxidized, Buffed Relieved, Polished Highlights and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 5. DIMENSIONS: DIAMETER: 5/8 inch (REF) THICKNESS (at thickest edge): 0.065 inch + 0.005 inc
3、h INCH-POUND MIL-DTL-11484/159D 2 February 2010 SUPERSEDING MIL-DTL-11484/159C 27 September 1996 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-11484/159D Page 2 of 2 NOTES: 1. The term (REF) refers to the measurements taken from the Governm
4、ent furnished hub or die. 2. Attaching device shall be prong with pick and wing type clutch. The prong shall be centered on the reverse side and fused or soldered to the lapel button. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to th
5、e previous issue due to the extent of the changes. Custodian: Preparing activity: Army - IH Army - IH Review activities: (Project No. 8455-2010-067) DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
