1、AMSC N/A 1 of 2 FSC 8455 INCH-POUND MIL-DTL-11484/306A 1 May 2009 SUPERSEDING MIL-DTL-11484/306 12 July 2004 DETAIL SPECIFICATION SHEET LAPEL BUTTON, GALLANT UNIT CITATION, AIR FORCE This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements
2、 for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-11484. MATERIAL: Gilding Metal or Red Brass FINISH: Hard Enameled or Epoxied, Gold Plated, Mirror-like Polished, and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Nu
3、mber 6. DIMENSIONS: HEIGHT: 5/32 inch (REF) WIDTH: 11/16 inch (REF) THICKNESS (at edge): 0.065 0.005 inch NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. Attaching device shall be prong with pick and wing type clutch. The prong shall be centered
4、 on the reverse side and fused or soldered to the lapel button. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-11484/306A 2 of 2 3. Enameled/epoxied areas shall be as shown. When hard enamel is used, the material requirement shall be gilding
5、 metal. When epoxy is used, the material requirement shall be gilding metal or red brass. Colors shall conform to TIOH Hard Enamel Color Chip numbers listed below: COLOR CHIP NUMBER Scarlet 1 Blue 18 White 28 CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify c
6、hanges with respect to the previous issue due to the extent of the changes. Custodian: Preparing activity: Army - IH Army - IH Air Force - 11 (Project No. 8455-2009-068) Review activities: DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
