1、 AMSC N/A Page 1 of 2 FSC 8455 INCH - POUND MIL-DTL-15665/110 5 September 2012 DETAIL SPECIFICATION SHEET INSIGNIA, BRANCH OF SERVICE, OFFICER, CHAPLAIN, HINDU FAITH, U.S. ARMY This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for a
2、cquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-15665. DASH NUMBERS: -1 Regular Finish -2 Subdued Finish MATERIAL (-1 and -2): Red Brass 85/15 (UNS Alloy No. C-230) DIMENSIONS (-1 and -2): HEIGHT: 1 inch (REF) THICKNESS (at center): 0.0
3、84 inch 0.010 inch PIERCED Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-15665/110 Page 2 of 2 PIERCINGS (-1 and -2): The piercings shall be as indicated. FINISH: -1: Nickel Plated, Mirror-like Polished, and shall match The Institute of Her
4、aldry (TIOH) Metal Finish Chip Number 16. -2: Dull Flat Black, and shall match TIOH Metal Finish Chip Number 21. ATTACHING DEVICE (-1 and -2): Attaching device shall be prong and wing-grip clutch type with two prongs. The prongs shall be located along the diagonal center line of the insignia, descen
5、ding from right to left. The prongs shall be positioned at least 1/32 inch from the edge of the insignia and shall be 22/32 inch + 0 - 1/32 inch apart. NOTES: 1. The term (REF) refers to measurements taken from the Government loaned die or hub. Custodian: Preparing activity: Army - IH Army - IH Revi
6、ew activity: (Project No. 8455-2012-159) DLA-CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
