1、AMSC N/A Page 1 of 2 FSC 8455 INCH-POUND MIL-DTL-3628/175A 15 November 2005 SUPERSEDING MIL-DTL-3628/175 15 November 1996 DETAIL SPECIFICATION SHEET BADGE, QUALIFICATION, AVIATION, PILOT, SENIOR, AIR FORCE This specification is approved for use by all Departments and Agencies of the Department of De
2、fense. The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-3628. DASH NO. -1: Regular Size MATERIAL: Red Brass or Nickel Silver -2: Miniature Size FINISH: Nickel Plated (Red Brass only), Mirror-like Polished and shall
3、match The Institute of Heraldry (TIOH) Metal Finish Chip Number 16. DIMENSIONS: HEIGHT (overall): -1: 1-3/16 inch (REF) -2: 25/32 inch (REF) WIDTH (overall): -1: 3 inches (REF) -2: 2 inches (REF) THICKNESS (at thickest point of wings): -1: 0.130 inch + 0.005 inch -2: 0.095 inch + 0.005 inch Provided
4、 by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3628/175A Page 2 of 2 NOTES: 1. The term (REF) refers to measurements taken from the Government furnished hub or die. 2. Attaching device shall be prong and clutch type. The prongs shall be located on t
5、he horizontal center line, equidistant from each end and the following distance apart. Dash No. -1: 2 inches + 1/32 inch Dash No. -2: 1-1/2 inches + 1/32 inch 3. A mock forcer may be used to bring up the design of the shield and ridge line of the wings only. 4. Piercing shall be as indicated. CHANGE
6、S FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodian: Preparing activity: Army - IH Army - IH Air Force 11 (Project No. 8455-2010-013) Review activities: Air Force - 99 DLA - CT NOTE
7、 The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
