1、AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET BADGE, QUALIFICATION, SENIOR PARACHUTIST, NAVY AND MARINE CORPS This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of t
2、his specification sheet and the latest issue of MIL-DTL-3628. DASH NO. -1: Regular Size -2: Miniature Size MATERIAL: Not less than 85/15 Rich-Low Brass FINISH: 24K Gold Plated, Mirror-like Polished and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 6. DIMENSIONS: HEIGHT (overa
3、ll): -1: 13/16 inch (REF) -2: 13/32 inch (REF) WIDTH (overall): -1: 2-3/4 inches (REF) -2: 1-3/8 inches (REF) THICKNESS (at thickest point of wing): -1: 0.120 inch + 0.005 inch -2: 0.085 inch + 0.005 inchINCH-POUND MIL-DTL-3628/31H 19 February 2010 SUPERSEDING MIL-DTL-3628/31G 29 April 2005 Provided
4、 by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3628/31H Page 2 of 2 NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. The attaching device shall be prong and clutch type. Prongs shall be located o
5、n the horizontal center line, equidistant from each end. Prongs for -1 shall be 2-1/8 inches 1/64 inch apart. Prongs for -2 shall be 1 inch 1/64 inch apart. 3. A mock forcer may be used to bring up the design of the parachute. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revi
6、sion to identify changes with respect to the previous issue due to the extent of the changes. Custodian: Preparing activity: Army - IH Army - IH Navy NU Review activities: (Project No. 8455-2010-078) Navy - MC DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
