1、MIL-P-603L4 (1) 23 O6 0337537 I RI- i .- MIL-P-60314 (MU) Amendment 1 .20 Nmember, 1973 MILITARY SPECIFICATION PRIMER, PERCUSSIONy M32, PARTS FOR: This Amendment forms a part of Military Specification MIL- P-60314 (MU) dated 29 January 1965. In Paragraph 2.1 under Specifications: Delete “MIL-1- . 45
2、607-Inspection Equipment, Supply and Maintenance of,“- Delete 1MIL-I-5208-nspection Requirements, General Specifications for . Add the Following: “MIL-C-4 5 662 -Cal i br at i on S y s t em R e quir em en t s . Paragraph 2.1, under standards, add the following: “MIL-STD-1168 -Lot Numbering of Ammuni
3、tion.“ “MIL-STD-1169 Inert Ammunition Components. -Packaging, P9cking and Marking for Shipment of Paragraph 2.1 under Drawings, delete “Ordnance- Corps“ and -. sub s t it ut e “Army I Paragraph 2.1 under Publications, delete the following: “Ordnance Corps“. “IEL-6112755 - Index of Inspection Equipme
4、nt Lists.“ Paragraph 3.3 -Add the following sentence at end of the para- “All required markings shall be neat and sharply defined.“ graph: Add the following paragraph: . 3.4 First article inspection. -This specification makes provisions for first article inspection,. Requirements for the submission
5、of first article samples by the contractor shall be as specified in the contract. Relete Paragraph 4.1.1 in.its entirety and substitute the following: FSC: 1375 -75 DOCUMENT CONTAINS ., L.PAQB o Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-._ .-.
6、MIT,-P-60314 (NU) Amendnent 1 4.1.1 Submission of product. - At the time each completed lot of items deliverable under the contract is submitted to the Government for aaceptance, the contrator shall sunply the following information accompanied by a certificate which attests that the information movi
7、ded is correct and applicable to the product being submitted: a. A statement that the lot complies with all of the quality assurance provisions snecified in this specification. b. Drawing and saecification number and date, together with identification and date of chcnges thWetQe c. A statement that
8、all material Furchased by the contractor meets requirements, when such material is controlled by Government or commercial specifications referenced in any of the contractual documents, and the certificates of conformance are on file and available for review, Number of items in the lot. d. e. Date Su
9、bmitted. The certificate shall be signed by a resnoncible agent of the - certifying organization, The initial certificate submitted shall be substantiated by evidence of the agents authority to bind his mincinal, Substantiation of the agents authority will not be required with subsequent certificate
10、s unless, during the course of the contract, this authority is Vested in another agent of the certifying organization. . Delete Paragraphs 4.1.2 and 4.1.3 in their entireties. Delete Paragraphs 4.2, 4.2.1, 4.2.2 and 4.2.3 in their entireties and substitute the following: “4.2 First Article insnectio
11、n i i b.2.1 submission. - The contractor shall submit a first arti- cle sample as designated by the contracting officer for evalbation in accordance w5th the provisions of 4.2.2. sable shall consist of 25 assemblies and 25 complete sets of parts (i.ee 25 each of every component and every subassembly
12、) which have been produced by the contractor or furnished by a supplier and which have been manufactured using the same production processes, proce- dures and equipment which wiU be used in fulfilling,the contract. All parts and materials, including packaging and packing, shall be obtained from the
13、same source of supply as will be used in regular production. Frior to submission, the contractor shall inspect the samole to the degree necessary to assure that it confarm to the The first article 2 - - * -=-*-) ,u- P . u Provided by IHSNot for ResaleNo reproduction or networking permitted without l
14、icense from IHS-,-,-MIL-P-bo314 (1) 13 m 9997706 0337537 5 m . MIL-P-60314 (MU) . Am en dm en t 1 requirements of the contract and submit a record of this in= spection with the sample, including statements of findings for materials, processes and tests. A sample containing known de- fects will not b
15、e submitted unless specifically authorized- by thereof, as directed by the contracting officer, shall also be . submitted whenever there is a lapse in production for a period in excess of 90 days or whenever a change occurs in manufacturing . process, material used, drawing or specification such as
16、to signi- ficantly affect product uniformity as determined by the Government. 4.2.2 Inspections to be performed.-Assemblies and com- the Contracting Officer. A first article sample, or portion ponents will be subjected by the Government to any or all the examinations or- tests specified in 4,.3.2 of
17、 this specification and any or all requirements of the applicable specifications.“ . “4.2.3 Rejection.-If any assembly or component fails to comply with any of the applicable requirements, the first article sample shall be rejected. The Government reserves the right to terminate its inspection upon
18、any failure of an assembly or component to comply with any of the stated requirements.“ Delete Paragraph 4.3.1 in its entirety and substitute the following: “4.3.1 Lot Formation.-The term “inspection lot“, as used in this specification, is defined as an essentially homogeneous collection of units of
19、 product from which a representative sample is drawn and inspected to determine conformance with applicable requirements. The sample selected shall represent only that quantity of units from which the sample was drawn and shall not be construed to represent any prior or,subsequent quantities present
20、ed for inspection. Homogeneity shall be considered to exist provided the inspection lot has been pro- dced by one manufacturer, in one unchanged process, using the same materials and methods, in accordance with the same drawing, same drawing revisions, same specifications and same specification revi
21、sions, and complies with 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-P-6034 (MU) Amendment 1 the provisions for submission of product as specified in Standard MIL-STD-105. Changes to the process, specifications or drawings, not affecting sa
22、fety, performance, interchangeability or storage, as determined by the Government, shall not be deemed to alter the homogeneity of an inspection lot. All mterial submitted for in- spection in accordance with this specificat-ion shall comply with the homogeneity criteria specified herein, regardlesp
23、of the typ of sampling procedure which is being applied to determine confor- mnce with requirements. Lot numbering, as required, shall be in . accordance with MIL-STD-1168.1 In the sub-sections under 4.3,2 make the following changes: Delete “Code No. (see 6.2)“ and the code numbers lOIOO1lr through
24、and including “03011“ wherever they appear. Add llCD“ after the word Gage wherever it a-pears. Delete paragraphs 4.3.3, L3.3.1, 4.3.3.2, and 4.3.3.3 in their It 83.3 entireties and substitute the follming: qui-red to perform the examinations and tests prescribed in this section is identified under t
25、he Wethod of Inspection“ headings in 4.3.211 Ins?ection Equipment. - The Inspection equiEment re- . 114.3.3.1 - Insnection Qui?ment Ca,pblity and Accuracy. - All Inspection equipment and facilities shall be of adequate quality and quantity to perform properly and accurately all the required inspecti
26、ons, measurements and tests. The inspection equipment shall be maintained in satisfactmy condition for the oontinued proper performince of these functions and shall be . calibrated in accordance with the provisions of MIL-C-45662.11 equinment drawings and Jists provided and rsvised in accordance wit
27、h the requirements may be used by DOD activities for design, pr murement, manufacture, testing, evaluation, pr duct ion and re - ceiving inspection, overhaul, shipping, storage, identification of stock, maintenance of equipment, construction, survey and whenever . l4.3.3.2 Government Rights to Docum
28、enttion. - Inspection . ._ 4 .- P - Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-. NIL-P-603a (HU) . Amendment 1 inspection equipment drawings ar e needed . It In Paragraph 5.1.1 delete “Specif icatioi-i .EIL-P-10025tt and subs titufe WL -:3D-n69
29、In Section 6, delete Faragra9hs 6.2, 6.3, 603.1, 6.3029, 6.3-3, 6.3.4, 6.3.5, 6.3.6, 6.3.7, 6.4, 6.5, 6.5.1, and 6.5.2, and substi- tute the follwing: %.2 Inspection Equipment Designsr - Inspection equipment de- SIE designs, if available are de- signs are of two types-Government Special Inspection E
30、quipment (SIE) designs and Contractor Designs. signated by dradng numbers (on the Fquinment Lists referenced on the Fquipment Tabulation) or (under the ttl.lethod of Insnection“ headings in Section 4) saection equipment is assigned to the Contractor. QuiFrnent to be designed by the Contractor is des
31、ignated The Contractor need not furnish any .sign when a comolete Government SIE design is provided. niay submit alternate or modified con%ractor designs of SIE in accordance with 6.2.2 and 6.2.3, should he elect to do SO.“ . 6.2.1 f ollming: a. necessary for the fabrication and use of the item of i
32、nspection equinment. Design resnonsibility for all other in- Unless other wise specified, however, the contractor SIE Designs. - SIE designs may consist of any of the Detailed drawings which conpletely depict all information b. A source control drawing or a snecification control drawing as defined i
33、n MIL-STD-100. C. An envelo-e drawing, as defined in BXL-CTD-100, which esf%blishes the criteria which a detail design shall meet. envelope drawings are snecified, the Contractor shall prepare designs which comply with the criteria therein. for all insrection equinment for which SIE designs are no+,
34、 snecified, and mag include comercial equinment which the Contrac- tor pronoses to use. fied equinment which is cataloged and available for nurchase by the general wblic) . onerating instructions, calibration nrocedures and maintenance pro- cedures. listings or other means which provide sufficient i
35、nfornation to When 6.2.2 Contractor Designs. - Contractor designc are required (Comercial equinment is defined a3 unmodi- Contractor designs shall include annropriate Commerciai equinment shall be fully described by catalog 5 Provided by IHSNot for ResaleNo reproduction or networking permitted witho
36、ut license from IHS-,-,-MIL-P-60314 (1) 13 m 7797706 0337542 5 m I - MIT-P-603a (Mu) Amendment 1 nemnit identification and evalution by the Government and may include illustrations and engineering data. Designs shall be pre- med for any snecial fixture (SI required to be used with cammer- cial equir
37、iment, or with SIE designs, if not otherwise covered thereby; (see 6,2.1 c). Designs shall be OP the category and . form (ner Nit-D-1000) sDecif ied in the Contract Data Requirements Usts (DDForm a231 The Contractor is referred to MIL-HDBK-204, IIInsyection Equipment Design“ for guidance. number, pa
38、ragraph number and defect number (or other specific identifSng information) from Section 4 of this specification shall be referenced on each Contractor design, together with the component or assembly drawing number and revision letter to which the specific design anplies. II The snecif ication 116.2
39、.3. Submission of Deaigns for Amrova: - Contractor de- signs shall be anmoved by the Government rsror to fabricating or nrocuring the equiEment. Designs shall be submitted for atnroval in accordance with the stinulations, time-frame and distribution snecified in the Contract Data Requirements List (
40、DD Form a23) or in the contract. Partial submission of insvection equiyment is nermissible and encouraged. However, the completion date for design review will be based on the date of final submission of designs. Dlished within one month after receipt.“ Picatinny Arsenal design review will normally b
41、e accom- . “6.3 New Haterial Test Sample Requirements; - All requests far permission to use materials other than those specified on amlicable drawings or specifications should be accompnied by a sample of the proposed substitute material to perMt evaluation by Picatinny Arsenal. Prior to anproval, a
42、ll substitute materials mwt be tested for comhatibility with Black Powder, M9 FroDellant and with the 1-135 bimer charge mixture, in addition to an?; testing required to evaluate the performance of the proposed substitute . Custodian: Army - PA neriaring Activity: Army - PA rroject Number 1375 - A059 *US. GOVERNMENT PRINTING OFFICE: 1974-713154/5831 i Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
