ARMY UFGS-28 31 75 00 10-2008 CENTRAL FIRE ALARM SYSTEM DIGITAL ALARM COMMUNICATOR TYPE《数字警报发送器型中央火灾报警系统》.pdf
《ARMY UFGS-28 31 75 00 10-2008 CENTRAL FIRE ALARM SYSTEM DIGITAL ALARM COMMUNICATOR TYPE《数字警报发送器型中央火灾报警系统》.pdf》由会员分享,可在线阅读,更多相关《ARMY UFGS-28 31 75 00 10-2008 CENTRAL FIRE ALARM SYSTEM DIGITAL ALARM COMMUNICATOR TYPE《数字警报发送器型中央火灾报警系统》.pdf(17页珍藏版)》请在麦多课文档分享上搜索。
1、*USACE / NAVFAC / AFCESA / NASA UFGS-28 31 75.00 10 (November 2008)-Preparing Activity: USACE SupersedingUFGS-28 31 75.00 10 (April 2006)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated October 2008*SECTION TABLE OF CONTENTSDIVISION 28 - ELECTRONIC SAFETY AND SECURI
2、TYSECTION 28 31 75.00 10CENTRAL FIRE ALARM SYSTEM, DIGITAL ALARM COMMUNICATOR TYPE11/08PART 1 GENERAL1.1 REFERENCES1.2 SYSTEM DESCRIPTION1.2.1 Operation1.2.2 Alarm Functions1.2.3 Supervisory Functions1.2.4 Primary Power1.2.5 Battery Backup Power1.3 SUBMITTALS1.4 QUALITY ASSURANCE1.4.1 Qualifications
3、1.4.1.1 Registered Professional Engineer1.4.1.2 Installer1.5 DELIVERY, STORAGE, AND HANDLING1.6 SPECIAL TOOLS AND SPARE PARTSPART 2 PRODUCTS2.1 STANDARD PRODUCTS2.2 NAMEPLATES2.3 FIRE ALARM MONITORING CENTER2.3.1 Digital Alarm Communicator Receiver (DACR)2.3.2 Audible Alarm2.3.3 Receiver Code Format
4、2.3.4 Visual Display2.3.5 Receiver Memory2.3.6 Receiver Supervision2.3.7 Manual Battery Test2.3.8 Telephone Line Connection2.3.9 Power Supply2.3.10 External Connections2.3.11 Self-Contained Printer2.4 MONITORING CENTER TERMINAL2.5 MONITORING CENTER PRINTER2.6 MONITORING CENTER POWER SUPPLIESSECTION
5、28 31 75.00 10 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2.7 DIGITAL ALARM COMMUNICATOR TRANSMITTER (DACT)2.7.1 Functional Requirements2.7.1.1 Interfacing Indicators and Controls2.7.1.2 Signal Transmission2.7.2 Enclosure2.7.3 Digital Alar
6、m Communicator Transmitter Interface Device2.8 DIGITAL ALARM COMMUNICATOR TRANSMITTER POWER SUPPLY2.8.1 Battery Power2.8.2 Battery Duration2.8.3 Battery Supervision2.9 PERIPHERAL EQUIPMENT2.9.1 Conduit2.9.2 Ground Rods2.9.3 Wiring2.9.4 DACT ProgrammerPART 3 EXECUTION3.1 EXAMINATION3.2 INSTALLATION3.
7、2.1 Power Supply for the System3.2.2 Wiring for Systems3.3 OVERVOLTAGE AND SURGE PROTECTION3.4 GROUNDING3.5 TRAINING3.6 TESTING3.6.1 Performance Testing3.6.2 Acceptance Test- End of Section Table of Contents -SECTION 28 31 75.00 10 Page 2Provided by IHSNot for ResaleNo reproduction or networking per
8、mitted without license from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-28 31 75.00 10 (November 2008)-Preparing Activity: USACE SupersedingUFGS-28 31 75.00 10 (April 2006)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated October 2008*SECTION 28 31 75.00 10CENTRAL F
9、IRE ALARM SYSTEM, DIGITAL ALARM COMMUNICATOR TYPE11/08*NOTE: This guide specification covers the requirements for digital alarm communicator type central fire alarm systems.Edit this guide specification for project specific requirements by adding, deleting, or revising text. For bracketed items, cho
10、ose applicable items(s) or insert appropriate information.Remove information and requirements not required in respective project, whether or not brackets are present.Comments and suggestions on this guide specification are welcome and should be directed to the technical proponent of the specificatio
11、n. A listing of technical proponents, including their organization designation and telephone number, is on the Internet.Recommended changes to a UFGS should be submitted as a Criteria Change Request (CCR).*PART 1 GENERAL*NOTE: This Section is to be used for the installation of a central monitoring s
12、ystem which will monitor the status of individual building fire alarm systems and transmit indication of abnormal conditions via dial-up telephone lines to a monitoring center. The specification may be used for new installations or replacement of existing systems.The following information, if releva
13、nt, should be on the project drawings:1. On electrical floor plans, show location of source of power to the monitoring center location, SECTION 28 31 75.00 10 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DACT, existing fire alarm panels, bat
14、teries and charger, and primary power supply.2. Show single-line system riser diagram. Each device on the riser should be provided with a device number indicating building number. Indicate connection of equipment by circuit runs, or conduit runs.*1.1 REFERENCES*NOTE: This paragraph is used to list t
15、he publications cited in the text of the guide specification. The publications are referred to in the text by basic designation only and listed in this paragraph by organization, designation, date, and title.Use the Reference Wizards Check Reference feature when you add a RID outside of the Sections
16、 Reference Article to automatically place the reference in the Reference Article. Also use the Reference Wizards Check Reference feature to update the issue dates.References not used in the text will automatically be deleted from this section of the project specification when you choose to reconcile
17、 references in the publish print process.*The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)IEEE C135.30 (1988) Zinc-Coated F
18、errous Ground Rods for Overhead or Underground Line ConstructionIEEE C62.41.1 (2002) IEEE Guide on the Surges Environment in Low-Voltage (1000 V and Less) AC Power CircuitsIEEE C62.41.2 (2002) IEEE Recommended Practice on Characterization of Surges in Low-Voltage (1000 V and Less) AC Power CircuitsN
19、ATIONAL FIRE PROTECTION ASSOCIATION (NFPA)NFPA 70 (2007; AMD 1 2008) National Electrical Code - 2008 EditionNFPA 72 (2006) National Fire Alarm CodeSECTION 28 31 75.00 10 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TELECOMMUNICATIONS INDUSTR
20、Y ASSOCIATION (TIA)TIA-570-B (2004) Residential Telecommunications Infrastructure StandardUNDERWRITERS LABORATORIES (UL)UL 1242 (2006; Rev thru Jul 2007) Standard for Electrical Intermediate Metal Conduit - SteelUL 467 (2007) Standard for Grounding and Bonding EquipmentUL 6 (2007) Standard for Elect
21、rical Rigid Metal Conduit-SteelUL 797 (2007) Standard for Electrical Metallic Tubing - Steel1.2 SYSTEM DESCRIPTION1.2.1 OperationProvide a central fire alarm system which is a complete, supervised system consisting of remote digital transmitters connected to building fire alarm panels and a digital
22、receiver system at a central monitoring location. The system shall be activated into the alarm mode when an abnormal condition occurs in any building fire alarm system. The system shall remain in the alarm mode until the alarm is acknowledged and reset by the operator. Configure he central fire alar
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
本资源只提供5页预览,全部文档请下载后查看!喜欢就下载吧,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ARMYUFGS28317500102008CENTRALFIREALARMSYSTEMDIGITALALARMCOMMUNICATORTYPE 数字 警报 发送 中央 火灾 报警 系统 PDF

链接地址:http://www.mydoc123.com/p-449678.html