1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-21832-4 ARP 763:2008 Edition 1 ISO/IEC GUIDE 2:2004 Edition 8SABS STANDARDS DIVISION Recommended practice Standardization and related acti
4、vities General vocabulary This recommended practice is the identical implementation of ISO/IEC Guide 2:2004 and is adopted with the permission of the International Organization for Standardization and the International Electrotechnical Commission. This document does not have the status of a South Af
5、rican National Standard. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911 fax: +27 12 344 1568 www.sabs.co.za SABS This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ARP 763:2008
6、 Edition 1 ISO/IEC GUIDE 2:2004 Edition 8 Table of changes Change No. Date Scope National foreword This recommended practice was approved by National Committee SABS TC 200, Development of standards for standards, in accordance with procedures of the SABS Standards Division, in compliance with annex
7、3 of the WTO/TBT agreement. This document was published in July 2008. This standard may only be used and printed by approved subscription and freemailing clients of the SABS. Eighth edition 2004 Huitime dition 2004 2004 ISO/IEC 2004 GUIDE 2Standardization and related activities General vocabulary No
8、rmalisation et activits connexes Vocabulaire gnral . ARP 763:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO/IEC GUIDE 2:2004(E/F/R) ISO/IEC 2004 The reproduction of the terms and definitions contained in this International Standard is
9、permitted in teaching manuals, instruction booklets, technical publications and journals for strictly educational or implementation purposes. The conditions for such reproduction are: that no modifications are made to the terms and definitions; that such reproduction is not permitted for dictionarie
10、s or similar publications offered for sale; and that this International Standard is referenced as the source document. With the sole exceptions noted above, no other part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying a
11、nd microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. La reproduction des termes et des dfinitions contenus dans la prsente Norme internationale est autorise dans les manuels denseignement, les modes demploi, les publica
12、tions et revues techniques destins exclusivement lenseignement ou la mise en application. Les conditions dune telle reproduction sont les suivantes: aucune modification nest apporte aux termes et dfinitions; la reproduction nest pas autorise dans des dictionnaires ou publications similaires destins
13、la vente; la prsente Norme internationale est cite comme document source. la seule exception mentionne ci-dessus, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms
14、, sans laccord crit de lISO ladresse ci-aprs ou du comit membre de lISO dans le pays du demandeur. , , , , , . : ; , ; . , , , , , , , , , . ISO copyright office Case postale 56 CH- 12 11 Geneva 20 Tel. + 4 1 22 749 01 11 Fax + 4 1 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Sw
15、itzerland/Publi en Suisse/ e a ii ISO/IEC 2004 All rights reserved/Tous droits rservs/ ARP 763:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO/IEC GUIDE 2:2004(E/F/R) ISO/IEC 2004 All rights reserved/Tous droits rservs/ iiiPDF disclaime
16、r This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accep
17、t therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the fi
18、le; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. PDF Exonration de r
19、esponsabilit Le prsent fichier PDF peut contenir des polices de caractres intgres. Conformment aux conditions de licence dAdobe, ce fichier peut tre imprim ou visualis, mais ne doit pas tre modifi moins que lordinateur employ cet effet ne bnficie dune licence autorisant lutilisation de ces polices e
20、t que celles-ci y soient installes. Lors du tlchargement de ce fichier, les parties concernes acceptent de fait la responsabilit de ne pas enfreindre les conditions de licence dAdobe. Le Secrtariat central de lISO dcline toute responsabilit en la matire. Adobe est une marque dpose dAdobe Systems Inc
21、orporated. Les dtails relatifs aux produits logiciels utiliss pour la cration du prsent fichier PDF sont disponibles dans la rubrique General Info du fichier; les paramtres de cration PDF ont t optimiss pour limpression. Toutes les mesures ont t prises pour garantir lexploitation de ce fichier par l
22、es comits membres de lISO. Dans le cas peu probable o surviendrait un problme dutilisation, veuillez en informer le Secrtariat central ladresse donne ci-dessous. PDF O o o e e o o a o a o a PDF o e o e a e o a e . ooe e o o Adobe, o a o e o e a a a o a , o a o o e o e e e , a e e ae, o a e e o e o e
23、 ee a o a o o a e x o e o e e a o a. a e e a o e o a a a e e o a e o o o a a a e o e e o a o e e e o x o Adobe. e a e e a a O e e e a o o e e o o o o e . Adobe e o o a o Adobe Systems Incorporated. e a , o o e o a o o e e e o o a e o a a oe o a a PDF, o o o o a e General Info a a; a a e o a PDF o o
24、a e a . e eoxo e e , o a a o a o o a e a o a o e e a O. e x a x, o a o o o e o o a , o a o o a e a e e a a o ae , e e o e. ARP 763:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO/IEC GUIDE 2:2004(E/F/R) iv ISO/IEC 2004 All rights reserv
25、ed/Tous droits rservs/ Contents Page Foreword .vii Introduction.xii Scope. 1 Normative references.2 1 Standardization.4 2 Aims of standardization .8 3 Normative documents 12 4 Bodies responsible for standards and regulations. 18 5 Types of standards .22 6 Harmonization of standards.26 7 Content of n
26、ormative documents30 8 Structure of normative documents .34 9 Preparation of normative documents .36 10 Implementation of normative documents.40 11 References to standards in regulations .42 12 Conformity assessment.46 Alphabetical indexes English (en)48 French (fr)50 Russian (ru).5 1 German (de).53
27、 Spanish (es).55 Italian (it)56 Dutch (nl)57 Swedish (sv)59 ARP 763:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO/IEC GUIDE 2:2004(E/F/R) ISO/IEC 2004 All rights reserved/Tous droits rservs/ viiForeword ISO (the International Organiza
28、tion for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respec
29、tive organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work International Standards are
30、 drafted in accordance with the rules given in the ISI/IEC Directives, Part 2. Draft Guides adopted by the responsible Committee or Group are circulated to national bodies for voting. Publication as a Guide requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn
31、to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. The first edition of this Guide was published by ISO in 1976. It was prepared by the United Nations Economic Com
32、mission for Europe (UN/ECE) in consultation with ISO, primarily to facilitate the work of the UN/ECE aimed at removal of barriers to international trade arising from lack of harmonization of standards or inadequate international application of standards. The second, third and fourth editions of ISO
33、Guide 2 added new terms and definitions in more or less isolated groups, within no overall planned framework. Work on a systematically structured revision was authorized by the ISO Council in 198 1 as the principal task of a working group within the ISO Committee on standardization principles (ISO/S
34、TACO), including IEC and UN/ECE spokesmen and in cooperation with the ISO Committee on conformity assessment (ISO/CASCO) and the International Laboratory Accreditation Conference (ILAC). The main reason for this activity was a request from UN/ECE for complete and urgent revision of ISO Guide 2 to ta
35、ke into account a number of specific problems raised by the UN/ECE Government Officials Responsible for Standardization Policies as well as the proposed terminology being prepared in the UN/ECE Working Party on Building. Moreover, ISO was publishing an increasing number of Guides on standardization
36、policies and procedures, several of them in conjunction with IEC. To guard against terminological inconsistencies, a clear understanding of basic concepts needed to be established, and unambiguous general terms and definitions provided. The resulting fifth edition of Guide 2 was issued, for the firs
37、t time as a joint ISO/IEC publication, in 1986. The sixth edition ( 1991) incorporated amendments in response to specific questions raised by ISO and IEC members, requests from the General Agreement on Tariffs and Trade (GATT) and the UN/ECE, and proposals from ISO/CASCO. The seventh edition ( 1996)
38、 preserved the structure of its recent predecessors by grouping related concepts under generic clause headings. Thus, Clauses 1 to 11 concerned standardization, proceeding from the more general to more specific aspects. Similarly, the terms and definitions given in the revised Clauses 12 to 17 cover
39、ed the broad spectrum of conformity assessment. These latter clauses were modified on the recommendations of ISO/CASCO to reflect developments in conformity assessment activities, and were approved by the national bodies of ISO and IEC in 1994. They were not intended to provide a comprehensive class
40、ification but included, in particular, concepts related to the following typical sequence: a) determination of product, process or service characteristics (Clause 13); b) comparison of characteristics with specified requirements, i.e. conformity evaluation (Clause 14); c) assurance of conformity, e.
41、g. by suppliers declaration or by certification (Clause 15). This eighth edition (2004) is identical to the seventh edition except that the terms and definitions on conformity assessment (in Clauses 12 to 17 in the 7th edition) have been deleted and replaced by a normative reference to ISO/IEC 17000, Conformity assessment Vocabulary and general principles. ARP 763:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO/IEC GUIDE 2:2004(E/F/R) xii ISO/IEC 2004 All rights reserved/Tous droits rservs/ Introduction Whilst ISO
