1、ASD-STAN STANDARD NORME ASD-STAN ASD-STAN NORM prEN 3375-002 Edition P 2 February 2011 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATIONAvenue de Tervuren, 270 - B-1150 Brussels - Tel. 32 2 775 8126 - Fax. 32 2 775 8131 - www.asd-stan.orgICS: Supersedes editio
2、n P 1 of October 2005 Descriptors: ENGLISH VERSION Aerospace series Cable, electrical, for digital data transmission Part 002: General Srie arospatiale Cbles lectriques pour transmission de donnes numriques Partie 002 : Gnralits Luft- und Raumfahrt Elektrische Leitungen fr Digitaldatenbertragungen T
3、eil 002: Allgemeines This “Aerospace Series“ Prestandard has been drawn up under the responsibility of ASD-STAN (The AeroSpace and Defence Industries Association of Europe - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the ex
4、perts of the concerned Domain following member comments. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review
5、 by users and formal agreement of ASD-STAN, it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giving t
6、he EN the status of a national standard and by withdrawing any national standards conflicting with the EN. Edition approved for publication 28 February 2011 Comments should be sent within six months after the date of publication to ASD-STAN Electrical Domain Copyright 2011 by ASD-STAN prEN 3375-002:
7、2011 (E) 2 Contents Page Foreword2 1 Scope 3 2 Normative references 3 3 Terms and definitions .4 4 List of product standards .4 5 Materials and construction .5 5.1 Materials .5 5.2 Construction.5 5.3 Colour coding.5 6 Identification and marking 5 7 Technical specification .6 Foreword This standard w
8、as reviewed by the Domain Technical Coordinator of AECMA-STANs Electrical Domain. After inquiries and votes carried out in accordance with the rules of AECMA-STAN defined in AECMA-STANs General Process Manual, this standard has received approval for Publication. prEN 3375-002:2011 (E) 3 1 Scope This
9、 standard specifies the list of product standards and common characteristics of signal data transmission electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures between 65 C and 150 C or 200 C or 260 C (as specified in product standards). 2 Normative refer
10、ences The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2083, Aerospace series Copper or copper
11、alloy conductors for electrical cables Product standard EN 3375-001, Aerospace series Cable, electrical, for digital data transmission Part 001: Technical specification EN 3375-003, Aerospace series Cable, electrical, for digital data transmission Part 003: Single braid 77 Ohms Type KG Product stand
12、ard EN 3375-004, Aerospace series Cable, electrical, for digital data transmission Part 004: Double braid 77 Ohms Type WJ Product standard EN 3375-005, Aerospace series Cable, electrical, for digital data transmission Part 005: Double braid metallic layer 77 Ohms Type WV Product standard EN 3375-006
13、, Aerospace series Cable, electrical, for digital data transmission Part 006: Single braid 78 Ohms Type XM Product standard EN 3375-007, Aerospace series Cable, electrical, for digital data transmission Part 007: Double braid 77 Ohms Type WW Product standard EN 3375-008, Aerospace series Cable, elec
14、trical, for digital data transmission Part 008: Single braid Star Quad 100 Ohms Type KD Product standard EN 3375-009, Aerospace series Cable, electrical, for digital data transmission Part 009: Single braid CAN Bus 120 Ohms Type WX Product standard EN 3375-010, Aerospace series Cable, electrical, fo
15、r digital data transmission Part 010: Single braid CAN Bus 100 Ohms Type WF Product standard 1)EN 3375-011, Aerospace series Cable, electrical, for digital data transmission Part 011: Single braid Star Quad 100 Ohms Lightweight Type KL Product standard 1)EN 3375-012, Aerospace series Cable, electric
16、al, for digital data transmission Part 012: Single braid Star Quad 100 Ohms Fire resistant Type KH Product standard 1)EN 3475-100, Aerospace series Cables, electrical, aircraft use Test methods Part 100: General 1) In study at the date of publication of this standard. prEN 3375-002:2011 (E) 4 EN 383
17、8, Aerospace series Requirements and tests on user-applied markings on aircraft electrical cables 2)EN 4434, Aerospace series Copper or copper alloy lightweight conductors for electrical cables Product standard (Normal and tight tolerances) TR 6058, Aerospace series Cable code identification list 3)
18、3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 3475-100 apply. 4 List of product standards See Table 1. Table 1 EN 3375- Main use Cable code Impedance Size Type of screeningAttenuation at 1MHz Others dB/100 m 003 KG 24 Single braid 004 WJ 24 Double b
19、raid 005 WV 77 7 24 High immunity 3,6 200 C 007 BUS 1553 WW 77 7 26 Double braid 4,1 200 C 006 BUS XM 78 7 24 Single braid 3,5 200 C 008 KD 100 15 24 Single braid 2,1 125 C 011 KL 100 15 24 Single braid 2,1 125 C Lightweight012 ETHERNET QUAD KH 100 15 24 Single braid 2,1 260 C Fire resistant 009 WX
20、120 12 26 Single braid 3,0 200 C 010 CAN BUS WF 100 10 24 Single braid 3,0 200 C NOTE Values mentioned in this Table are for information. For more precisions, please refer to concerned product standard. 2) Published as ASD-STAN Prestandard at the date of publication of this standard (www.asd-stan.or
21、g). 3) Published as ASD-STAN Technical Report at the date of publication of this standard (www.asd-stan.org). prEN 3375-002:2011 (E) 5 5 Materials and construction 5.1 Materials The cable conductors shall be made of copper or copper alloy and silver plated according to EN 2083 or EN 4434 code C (exc
22、ept otherwise specified in the product standard). 5.2 Construction Numbers of cores, screen description and jacket definition: See product standard. 5.3 Colour coding Core: white and blue Jacket: white (except otherwise specified in the product standard). 6 Identification and marking The identificat
23、ion and marking of cables by the manufacturer shall be in accordance with EN 3375-001. As the designation, required for orders, is generally too long, for use in electrical drawings a shorter cross designation (without colour information) is given by the TR 6058 plus the corresponding nearest AWG (g
24、auge code). EXAMPLE Designation: EN3375-004C01 Cross reference: WJ C 24 This shorter designation is used for identification and marking as in the following example, see Figure 1: EN WJ C 24 FR F 05 Reference to EN standard cable 4 spaces 4)Type code Specific code Gauge code Manufacturer country code
25、 Manufacturer code Year of manufacturing 4) Spaces are mandatory, with a possible exception for the second one. prEN 3375-002:2011 (E) 6 Figure 1 The marking is applied to the outer jacket or on a tape beneath a transparent outer jacket. The cables shall be capable of being printed with the user-applied markings according to EN 3838 when applicable in the product standard. 7 Technical specification See EN 3375-001. EN WJ C 24 FRF05(300 50) mm60 mm max. EN WJ C 24 FRF05
