1、ASD-STAN STANDARD NORME ASD-STAN ASD-STAN NORM prEN 4165-018 Edition P 2 February 2014 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATION Rue Montoyer 10 - 1000 Brussels - Tel. + 32 2 775 8126 - Fax. + 32 2 775 8131 - www.asd-stan.org ICS: 49.060 Supersedes edi
2、tion P 1 of February 2003 and will supersede EN 4165-018:2007 Descriptors: ENGLISH VERSION Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 018: Protective cover for all receptacles series 2 Product standard Srie arospatiale Connecteurs lectri
3、ques rectangulaires modulaires Temprature dutilisation 175 C continu Partie 018 : Bouchon de vol pour toutes les embases srie 2 Norme de produit Luft- und Raumfahrt Elektrischer Rechtecksteckverbinder in modularer Bauweise Betriebstemperatur 175 C konstant Teil 018: Schutzkappe fr Steckdose, Serie 2
4、 Produktnorm This “Aerospace Series“ Prestandard has been drawn up under the responsibility of ASD-STAN (The AeroSpace and Defence Industries Association of Europe - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of
5、 the concerned Domain following member comments. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by user
6、s and formal agreement of ASD-STAN, it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giving the EN th
7、e status of a national standard and by withdrawing any national standards conflicting with the EN. Edition approved for publication 28 February 2014 Comments should be sent within six months after the date of publication to ASD-STAN Electrical Domain Copyright 2014 by ASD-STAN prEN 4165-018:2014 (E)
8、 2 Contents Page Foreword 2 1 Scope 3 2 Normative references 3 3 Terms and definitions . 3 4 Required characteristics . 3 5 Protective cover . 4 6 Designation 7 7 Marking . 8 8 Technical specification . 8 Foreword This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Electrical
9、 Domain. After inquiries and votes carried out in accordance with the rules of ASD-STAN defined in ASD-STANs General Process Manual, this standard has received approval for Publication. prEN 4165-018:2014 (E) 3 1 Scope This standard defines the protective cover for all receptacles series 2 used in t
10、he family of rectangular electrical connectors. The connector accessory bodies corresponding to those protective covers are defined in EN 4165-004, EN 4165-011 and EN4165-025. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are ind
11、ispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2424, Aerospace series Marking of aerospace products EN 4165-001, Aerospace series Connectors, electrical
12、, rectangular, modular Operating temperature 175 C continuous Part 001: Technical specification EN 4165-002, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 002: Specification of performance and contact arrangements EN 4165-004, Aerospace ser
13、ies Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 004: Stackable mounting receptacle 2 and 4 modules, series 2 Product standard EN 4165-011, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 011: Flang
14、e mounting receptacle 2 and 4 modules, series 2 Product standard. EN 4165-025, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 025: Module receptacle Product standard 3 Terms and definitions For the purposes of this document, the terms and de
15、finitions given in EN 4165-001 apply. 4 Required characteristics See Figure 1 for 2 modules, Figure 2 for 4 modules and Figure 3 for single module. prEN 4165-018:2014 (E) 4 5 Protective cover 5.1 For 2 modules, classes W and F Mass max. 18,5 g Dimensions in millimetres aactive thread bhexagonal driv
16、e Key 1 Unlosable cord 2 Eyelet (hole diameter min. 3,4 mm, hole diameter max. 4,5 mm) 3 Seal 4 Shield device 5 Cord length Figure 1 Protective cover for 2 modules prEN 4165-018:2014 (E) 5 5.2 For 4 modules, classes W and F Mass max. 22 g Dimensions in millimetres aactive thread bhexagonal drive Key
17、 1 Unlosable cord 2 Eyelet (hole diameter min. 3,4 mm, hole diameter max. 4,5 mm) 3 Seal 4 Shield device 5 Cord length Figure 2 Protective cover for 4 modules prEN 4165-018:2014 (E) 6 5.3 For single module Mass max. 11 g Dimensions in millimetres Key 1 Unlosable cord 2 Eyelet (hole diameter min. = 3
18、 mm, hole diameter max. = 4,5 mm) 3 Seal Figure 3 Protective cover for single module prEN 4165-018:2014 (E) 7 5.4 Protective cover for receptacle class See Table 1. Table 1 Class DescriptionW Protective cover for receptacle with housing (shell) olive drab cadmium plated, aluminium alloy, 500 hours r
19、esistance to salt mist, maximum operating temperature 175 C continuous F Protective cover for receptacle with housing (shell) black nickel plated, aluminium alloy, 96 hours resistance to salt mist, maximum operating temperature 175 C continuous M Protective cover for receptacle with housing (shell)
20、nickel plated, composite, 500 hours resistance to salt mist, maximum operating temperature 175 C continuous 6 Designation EXAMPLE 1 Description block ELECTRICAL CONNECTOR PROTECTIVE COVER FOR RECEPTACLE Identity block EN4165F3B2G15 Number of the basic standard Class type (see Table 1) Type 3: protec
21、tive cover for receptacle (see EN 4165-002) Size: A for receptacle 2 modules Size: B for receptacle 4 modules 1: without sealing device 2: with sealing device G: grounding device 00: without cord 05: with cord length of 50 mm 15 mm 10: with cord length of 100 mm 15 mm 15: with cord length 150 mm 15
22、mm prEN 4165-018:2014 (E) 8 EXAMPLE 2 Description block ELECTRICAL CONNECTOR PROTECTIVE COVER FOR RECEPTACLE Identity block EN4165M3C Number of the basic standard Class type (see Table 1) Type 3: protective cover for receptacle (see EN 4165-002) Size: C for receptacle single module With sealing and grounding devices With cord length of 75 mm 15 mm 7 Marking Unless there are other specific contractual requirements, the marking shall be in accordance with EN 2424, category P. 8 Technical specification See EN 4165-001.
