1、ASD-STAN STANDARD NORME ASD-STAN ASD-STAN NORM prEN 4830-002 Edition P 1 March 2014 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATIONRue Montoyer 10 - 1000 Brussels - Tel. 32 2 775 8126 - Fax. 32 2 775 8131 - www.asd-stan.orgICS: Descriptors: ENGLISH VERSION A
2、erospace series Connectors, optical, rectangular, modular, operating temperature 125 C, for EN 4639-10X contacts Part 002: Specification of performance Srie arospatiale Connecteurs optiques rectangulaires, modulaires, temprature dutilisation 125 C, pour contacts EN 4639-10X Partie 002 : Spcification
3、 de performancesLuft- und Raumfahrt Optischer Rechtecksteckverbinder, modular, Betriebstemperatur 125 C, fr EN 4639-10X-Kontakte Teil 002: Leistungsdaten This “Aerospace Series“ Prestandard has been drawn up under the responsibility of ASD-STAN (The AeroSpace and Defence Industries Association of Eu
4、rope - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent tha
5、t interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of ASD-STAN, it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote an
6、d transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giving the EN the status of a national standard and by withdrawing any national standards conflicting with the EN. Edition approved for publication 1 March 2014 Comments shoul
7、d be sent within six months after the date of publication to ASD-STAN Electrical Domain Copyright 2014 by ASD-STAN prEN 4830-002:2014 (E) 2 Contents Page Foreword 2 1 Scope 3 2 Normative references 3 3 Terms and definitions . 4 4 Description and codification of models 4 5 Operating conditions . 4 6
8、Contacts sub-assembly 5 7 Sealing plugs 5 Foreword This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Electrical Domain. After inquiries and votes carried out in accordance with the rules of ASD-STAN defined in ASD-STANs General Process Manual, this standard has received app
9、roval for Publication. prEN 4830-002:2014 (E) 3 1 Scope This standard defines the material used in the manufacturing of EN 4830 optical modules. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application.
10、 For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 4529-003, Aerospace series Elements of electrical and optical connection Sealing plugs Part 003: Class T Product standard EN 4639-101, A
11、erospace Series Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Part 101: Optical contact for cable EN 4641-100 Operating temperatures between 65 C and 125 C Product standard 1)EN 4639-102, Aerospace Series Connectors, optical, r
12、ectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Part 102: Optical contact for cable EN 4641-102 Operating temperatures between 55 C and 100 C Product standard 1)EN 4639-103, Aerospace Series Connectors, optical, rectangular, modular, multicontact, 1,2
13、5 diameter ferrule, with removable alignment sleeve holder Part 103: Optical contact for cable EN 4641-101 Operating temperatures between 55 C and 150 C Product standard 2)EN 4641-100, Aerospace series Cables, optical 125 m diameter cladding Part 100: Tight structure 62,5/125 m core GI fibre 1,8 mm
14、outside diameter Product standard 1)EN 4641-101, Aerospace series Cables, optical 125 m diameter cladding Part 101: Tight structure 62,5 m core GI fibre 0,9 mm outside diameter Product standard 1)EN 4641-102, Aerospace series Cables, optical, 125 m diameter cladding Part 102: Semi-loose 62,5/125 m G
15、I fibre nominal 1,8 mm outside diameter Product standard 1)EN 4830-001, Aerospace series Connectors, optical, rectangular, modular, operating temperature 125 C, for EN 4639-10X contacts Part 001: Technical specification 1)EN 4830-004, Aerospace series Connectors, optical, rectangular, modular, opera
16、ting temperature 125 C, for EN 4639-10X contacts Part 004: Extraction tool Product standard 1)IEC 61300-3-33, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-33: Examinations and measurements Ferrule withdrawal force 3)TR 4684, Aerospace series
17、 Electrical and Optical technology and component definitions 2)1) Published as ASD-STAN Prestandard at the date of publication of this standard (www.asd-stan.org). 2) In preparation at the date of publication of this standard 3) Published by: IEC International International Electrotechnical Commissi
18、on http:/www.iec.ch/. prEN 4830-002:2014 (E) 4 3 Terms and definitions For the purposes of this document, the terms and definitions given in TR 4684 apply. 4 Description and codification of models See Table 1. Table 1 Environmental class Description W Plug and receptacle with housing (shell) olive d
19、rab cadmium plated, aluminium alloy, 500 h resistance to salt mist, maximum operating temperature: 125 C continuous. F Plug and receptacle with housing (shell) black nickel plated, aluminium alloy, conductive finish, 96 h resistance to salt mist, maximum operating temperature: 125 C continuous. J Pl
20、ug and receptacle with housing (shell) olive drab cadmium plated, composite material, conductive finish, 500 h resistance to salt mist, maximum operating temperature: 125 C continuous. M Plug and receptacle with housing (shell) nickel plated composite material, conductive finish, 500 h resistance to
21、 salt mist, maximum operating temperature: 125 C continuous. 5 Operating conditions 5.1 Optical performances The optical performances are defined in the product standards in relationship with the used cable. 5.2 Permissible cables Permissible cables are given in Table 2. Table 2 Cable designation Fi
22、bre Outer diameter cable EN designation cable A 62,5 / 125 0,9 mm diameter EN 4641-101 B 62,5 / 125 1,8 mm (tight structure) EN 4641-100C 62,5 / 125 1,8 mm (semi loose structure) EN 4641-102 prEN 4830-002:2014 (E) 5 5.3 Material See Table 3. Table 3 Sleeve Description Sleeve material Male insert Bod
23、y Thermoplastic 55 C to 125 C Sealing device Silicone elastomer Guiding pin AISI 304L Female insert Sleeve Zirconia ceramic or similar Body Thermoplastic 55 C to 125 C Sealing device Silicone elastomer Centring pin AISI 304L 5.4 Sleeve force Under IEC 61300-3-33 test conditions, the sleeve force mus
24、t be 1 N 2,5 N. 5.5 Climatic conditions Temperature range: 55 C to 125 C. Fluid resistance: see EN 4830-001. Corrosion resistance: 500 h resistance to salt mist. 5.6 Mechanical conditions Mechanical endurance: 500 mated and unmated cycles. 6 Contacts sub-assembly Removable contacts which can be used
25、 with the various classes of connectors are defined in the product standards. Product standard EN cable specification EN 4639-101 EN 4639-102 EN 4639-103 EN 4641-100 EN 4641-102 EN 4641-101 7 Sealing plugs Sealing plugs defined in EN 4529-003 N16 shall be used in the positions which correspond to unpopulated cavities.