1、Designation: E1666 95a (Reapproved 2012)An American National StandardStandard Classification forServiceability of an Office Facility for Work Outside NormalHours or Conditions1, 2This standard is issued under the fixed designation E1666; the number immediately following the designation indicates the
2、 year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This classification covers pairs of scales for clas
3、sifyingan aspect of the serviceability of an office facility, that is, thecapability of an office facility to meet certain possible require-ments to be able to do normal office tasks outside scheduledhours.1.2 Within that aspect of serviceability, each pair of scales,shown in Figs. 1-4, are for clas
4、sifying one topic of serviceabil-ity. Each paragraph in an Occupant Requirement Scale (seeFigs. 1-4) summarizes one level of serviceability on that topic,which occupants might require. The matching entry in theFacility Rating Scale (see Figs. 1-4) is a translation of therequirement into a descriptio
5、n of certain features of a facilitywhich, taken in combination, indicate that the facility is likelyto meet that level of required serviceability.1.3 The entries in the Facility Rating Scale (see Figs. 1-4)are indicative and not comprehensive. They are for quickscanning to estimate approximately, qu
6、ickly, and economically,how well an office facility is likely to meet the needs of one oranother type of occupant group over time. The entries are notfor measuring, knowing, or evaluating how an office facility isperforming.1.4 This classification can be used to estimate the level ofserviceability o
7、f an existing facility. It can also be used toestimate the serviceability of a facility that has been plannedbut not yet built, such as one for which single-line drawingsand outline specifications have been prepared.1.5 This classification indicates what would cause a facilityto be rated at a certai
8、n level of serviceability, but does not statehow to conduct a serviceability rating nor how to assign aserviceability score. That information is found in PracticeE1334. The scales in this classification are complimentary toand compatible with Practice E1334. Each requires the other.2. Referenced Doc
9、uments2.1 ASTM Standards:3E631 Terminology of Building ConstructionsE1334 Practice for Rating the Serviceability of a Buildingor Building-Related FacilityE1679 Practice for Setting the Requirements for the Ser-viceability of a Building or Building-Related Facility2.2 ISO Document:4ISO 6240 Internati
10、onal Standard, Performance Standards inBuildingContents and Presentation3. Terminology3.1 Definitions:3.1.1 facilitya physical setting used to serve a specificpurpose. E6313.1.1.1 DiscussionA facility may be within a building, awhole building, or a building with its site and surroundingenvironment;
11、or it may be a construction that is not a building.The term encompasses both the physical object and its use.3.1.2 facility serviceabilitythe capability of a facility toperform the function(s) for which it is designed, used, orrequired to be used. E6313.1.2.1 DiscussionThe scope of this performance
12、is of thefacility as a system, including its subsystems, components andmaterials and their interactions, such as acoustical, hydrother-mal, air purity, and economic; and of the relative importance ofeach performance requirement.3.1.3 offcea place, such as a room, suite, or building, inwhich business
13、, clerical or professional activities are con-ducted. E6313.1.4 For standard definitions of additional terms applicableto this classification, see Terminology E631.3.2 Definitions of Terms Specific to This Standard:3.2.1 hours of operation:3.2.1.1 active hoursthe time when a facility is normallyfull
14、y occupied and operational.1This classification is under the jurisdiction of ASTM Committee E06 onPerformance of Buildings and is the direct responsibility of Subcommittee E06.25on Whole Buildings and Facilities.Current edition approved April 1, 2012. Published May 2012. Originallyapproved in 1995.
15、Last previous edition approved in 2005 as E1666 95a (2005).DOI: 10.1520/E1666-95AR12.2Portions of this document are based on material originally prepared by theInternational Centre for Facilities (ICF) and r 1993 by ICF and Minister of PublicWorks and Government Services Canada. Their cooperation in
16、 the development ofthis standard is acknowledged.3For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.4Available f
17、rom American National Standards Institute (ANSI), 25 W. 43rd St.,4th Floor, New York, NY 10036, http:/www.ansi.org.1Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.3.2.1.2 normal working hoursin a multi-tenant building,the normal hour
18、s of the building are established by the buildingowner or operator; when there is a two-shift operation, thattwo-shift operation applies for the whole building, even thoughstaff may not be working in some parts of the building.3.2.1.3 silent hoursthe period when a facility is essen-tially unoccupied
19、, although security, cleaning, and buildingoperations staff may be present.3.2.1.4 transitional hoursthe time in the morning after thefirst workers normally arrive until a facility is fully operational,and in the evening from the end of normal work until thenormal workers have left, although securit
20、y, cleaning, andbuilding operations staff may be present.4. Significance and Use4.1 Each Facility Rating Scale (see Figs. 1-4) in thisclassification provides a means to estimate the level of service-ability of a building or facility for one topic of serviceabilityand to compare that level against th
21、e level of any other buildingor facility.4.2 This classification can be used for comparing how welldifferent buildings or facilities meet a particular requirementfor serviceability. It is applicable despite differences such aslocation, structure, mechanical systems, age, and buildingshape.4.3 This c
22、lassification can be used to estimate the amount ofvariance of serviceability from target or from requirement, fora single office facility, or within a group of office facilities.4.4 This classification can be used to estimate the following:4.4.1 Serviceability of an existing facility for uses other
23、than its present use.4.4.2 Serviceability (potential) of a facility that has beenplanned but not yet built.4.4.3 Serviceability (potential) of a facility for which re-modeling has been planned.4.5 Use of this classification does not result in buildingevaluation or diagnosis. Building evaluation or d
24、iagnosisgenerally requires a special expertise in building engineering ortechnology and the use of instruments, tools, or measurements.4.6 This classification applies only to facilities that arebuilding constructions, or parts thereof. (While this classifica-tion may be useful in rating the servicea
25、bility of facilities thatare not building constructions, such facilities are outside thescope of this classification.)4.7 This classification is not intended for, and is not suitablefor, use for regulatory purposes, nor for fire hazard assessmentnor for fire risk assessment.5. Basis of Classificatio
26、n5.1 The scales in Figs. 1-4 contain the basis for classifica-tion.5.2 Instructions for the use of this classification are con-tained in Practices E1334 and E1679.6. Keywords6.1 building; building operation; after hours; building ser-vices; loss of; facility; facility occupants; food services; after
27、hours; function; office; performance; rating; rating scale; re-quirements; serviceabilityE1666 95a (2012)2FIG. 1 Scale A.10.1 for Operation Outside Normal HoursE1666 95a (2012)3FIG. 1 Scale A.10.1 for Operation Outside Normal Hours (continued)E1666 95a (2012)4FIG. 2 Scale A.10.2 for Support After Ho
28、ursE1666 95a (2012)5FIG. 2 Scale A.10.2 for Support After Hours (continued)E1666 95a (2012)6FIG. 3 Scale A.10.3 for Temporary Loss of External ServicesE1666 95a (2012)7FIG. 3 Scale A.10.3 for Temporary Loss of External Services (continued)E1666 95a (2012)8FIG. 4 Scale A.10.4 for Continuity of Work (
29、During Breakdowns)E1666 95a (2012)9FIG. 4 Scale A.10.4 for Continuity of Work (During Breakdowns) (continued)ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised
30、that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reap
31、proved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you
32、 feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual
33、reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the ASTM website (www.astm.org/COPYRIGHT/).E1666 95a (2012)10
