1、Designation: E 2420 05Standard Guide forPost-Deactivation Surveillance and Maintenance ofRadiologically Contaminated Facilities1This standard is issued under the fixed designation E 2420; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revis
2、ion, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.1. Scope1.1 This guide outlines a method for developing a Surveil-lance and Maintenance (S facility deacti-vatio
3、n; nuclear facility; radioactive and hazardous materials;surveillance and maintenanceAPPENDIX(Nonmandatory Information)X1. Related DocumentsX1.1 ASTM Standards:2E 1034 Specification for Nuclear Facility Transient WorkerRecordsE 1167 Guide for Radiation Protection Program for Decom-missioning Operati
4、onsE 1168 Guide for Radiological Protection Training forNuclear WorkersE 1278 Guide for Radiological Pathway Methodology forRelease of Sites Following DecommissioningE 1281 Guide for Nuclear Facility Decommissioning PlansE 1760 Guide for Unrestricted Disposition of Bulk Materi-als Containing Residua
5、l Amounts of RadioactivityE 1819 Guide for Environmental Monitoring Plans for De-commissioning of Nuclear FacilitiesE 1892 Guide for Preparing Characterization Plans for De-commissioning Nuclear FacilitiesX1.2 U.S. Government Regulations:310 CFR 20 Standards for Protection Against Radiation10 CFR 83
6、0 Nuclear Safety Rules (QA, SARs, etc.)10 CFR 835 Occupational Radiation Protection29 CFR 1910.120 Hazardous Waste Operations and Emer-gency Response29 CFR 1910.1096 Ionizing Radiation Facility DeactivationGuide, Methods and Practices Handbook, DOE/EM-0318,December 1996International Atomic Energy Ag
7、ency (IAEA) DocumentsSafety Report Series No. 26, Safe Enclosure of NuclearFacilities During Deferred DismantlementASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly ad
8、vised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, eithe
9、r reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend.
10、If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Indiv
11、idual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org).3Available from U.S. Government Printing Office Superintendent of Documents,732 N. Capitol St., NW, Mail Stop: SDE, Washington, DC 20401.E2420054
