ATIS 0100509-1995 Packetized Circuit Multiplication Equipment C Interface Specification.pdf

上传人:花仙子 文档编号:540880 上传时间:2018-12-08 格式:PDF 页数:302 大小:9.15MB
下载 相关 举报
ATIS 0100509-1995 Packetized Circuit Multiplication Equipment C Interface Specification.pdf_第1页
第1页 / 共302页
ATIS 0100509-1995 Packetized Circuit Multiplication Equipment C Interface Specification.pdf_第2页
第2页 / 共302页
ATIS 0100509-1995 Packetized Circuit Multiplication Equipment C Interface Specification.pdf_第3页
第3页 / 共302页
ATIS 0100509-1995 Packetized Circuit Multiplication Equipment C Interface Specification.pdf_第4页
第4页 / 共302页
ATIS 0100509-1995 Packetized Circuit Multiplication Equipment C Interface Specification.pdf_第5页
第5页 / 共302页
亲,该文档总共302页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、 AMERICAN NATIONAL STANDARD FOR TELECOMMUNICATIONS ATIS-0100509.1995(R2013) Packetized Circuit Multiplication Equipment Interface Specification As a leading technology and solutions development organization, ATIS brings together the top global ICT companies to advance the industrys most-pressing bus

2、iness priorities. Through ATIS committees and forums, nearly 200 companies address cloud services, device solutions, emergency services, M2M communications, cyber security, ehealth, network evolution, quality of service, billing support, operations, and more. These priorities follow a fast-track dev

3、elopment lifecycle from design and innovation through solutions that include standards, specifications, requirements, business use cases, software toolkits, and interoperability testing. ATIS is accredited by the American National Standards Institute (ANSI). ATIS is the North American Organizational

4、 Partner for the 3rd Generation Partnership Project (3GPP), a founding Partner of oneM2M, a member and major U.S. contributor to the International Telecommunication Union (ITU) Radio and Telecommunications sectors, and a member of the Inter-American Telecommunication Commission (CITEL). For more inf

5、ormation, visit . AMERICAN NATIONAL STANDARD Approval of an American National Standard requires review by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board

6、of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made

7、towards their resolution. The use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone, whether he has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to th

8、e standards. The American National Standards Institute does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of th

9、e American National Standards Institute. Requests for interpretations should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American Natio

10、nal Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Notice of Disclaimer their exi

11、stence does not in any respect preclude anyone, whether he has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute does not develop standards and will in no ci

12、rcumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretations should be ad- dressed to the

13、secretariat or sponsor whose name appears on the title page of this standard. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdra

14、w this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Published by American National Standards Institute 11 West 42nd Street, New York, New York 10036 Copyright 0 1995 by Alliance f

15、or Telecommunications Industry Solutions All rights reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without prior written permission of the publisher. Printed in the United States of America APS2.5C5951150 ANSI T1.509-1995 American

16、 National Standard for Telecommunications - Packetized Circuit Multiplication Equipment - Interface Specification Secretariat Alliance for Telecommunications Industry Solutions , Approved January 12, 1995 American National Standards Institute, Inc. Abstract The purpose of this American National Stan

17、dard is to standardize the interface to packetized cir- cuit multiplication equipment (PMCE). PMCE converts speech, voiceband data, facsimile, chan- nel-associated (i.e., in-band) signaling, common-channel signaling, video, and digital data infor- mation from channelized DSl or Synchronous Optical N

18、etwork (SONET) formats to LAPD-like frame format. A PCME is one application of Wideband packet technology. This technology refers to packet sys- tems operating at 1.5 Mbit/s to 150 Mbit/s. Tl.PCME defines procedures and interface standards to allow vendors to provide compatible equipment for the US

19、marketplace and to permit both exchange and interexchange carriers to operate compatibly. Contents Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20、. . . . . . . . . . . . . . . . . . . . . . . . . 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Scope, purpose, and application . Normative references Definitions and abbreviations General considerations of packetized circuit multiplication equipment . Interfaces . Voiceband process

21、ing . . . . Video processing . . . . . . . . Interface with cellular speech packetization networks . . . Digital data interface . . . Digital circuit emulation (DICE) protocol . Virtual data link capability (VDLC) Interface with LAPD . . . . . . . Interface with V.120 . . Signaling transport . . . .

22、 . . . Facsimile demodulation and compression protocol . . . . . . . . Testing of the link . . . . . . . . Permanent virtual circuit restoration . . . . Packet stream backup . . . Generation of the alarm indication signal . . . . . . Data collection . . . . . . . . Congestion control . . . . . . . .

23、 . Dynamic load control . . . . . . . . . Interface with Q.922 frame relay networks . Synchronization . . . . Annex A Performance considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

24、 . B Augmented protocol specification language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii Page iv 1 2 4 6 10 11 12 12 12 12 24 36 36 37 41 81 84 88 90 90 91 102 102 102 103 105 C Formal description of the digital circuit emulation protocol (D

25、ICE). 109 D Formal description of the virtual data link capability (VDLC) protocol ; . 159 E Formal description of the facsimile demodulation compression protocol (FADCOMP). . 223 F Bibliography . 291 . . . III Foreword (This foreword is not part of American National Standard T1.509-1995.) Contempor

26、ary transmission techniques are evolving according to three scenarios. In the first scenario, the various types of traffic are treated in a homogeneous manner with respect to transmission and switching. The second scenario calls for augmenting the number of available paths with- out affecting servic

27、e quality by time division techniques. Finally, in the third scenario, which is often associated with the increasing digitization of networks, the information is packetized before transmission. Wideband Packet Technology is founded on the three scenarios simultane- ously. Although packet transmissio

28、n is not new, the originality of the new approach resides in routing over the same path the digital signals corre- sponding to services of a different nature (speech, voiceband data, facsimile, signaling, etc.). Packetized circuit multiplication equipment (PCME), there- fore, uses the techniques ava

29、ilable for digital circuit multiplication, packet networks, and frame relay networks to transport a variety of traffic types. The purpose of this American National Standard is to standardize the interfaces to PCME so that vendors can provide internetworking units for the United States and the intern

30、ational marketplace. Additionally, both exchange and interexchange carriers may be assured of compatible net- work interfaces and specific functional compatibilities. It is expected that both manufacturers and carriers will utilize this standard. This standard is new; it does not replace, revise, or

31、 supplement any exist- ing North American standard for PCME system interface or functional requirements. There are six annexes to this standard. The first annex is normative; the others are informative, and are not considered part of this standard. Suggestions for improvement of this standard are we

32、lcome. They should be sent to the Tl Secretariat, c/o Alliance for Telecommunications Industry Solutions, 1200 G Street, NW, Suite 500, Washington, DC 20005. This standard was processed and approved for submittal to ANSI by Accredited Standards Committee on Telecommunications, Tl. Committee approval

33、 of the standard does not necessarily imply that all members voted for its approval. At the time it approved this standard, the Tl com- mittee had the following members: A. K. Reilly, Chairman G. H. Peterson, Vice-Chairman 0. J. Gusella, Jr., Secretary B. Lerich, Senior Editor M. Sharif, Technical E

34、ditor R. Wright, Technical Editor Organization Represented Name of Representative EXCHANGE CARRIERS Ameritech Services, Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Laurence A. Young Peter K. Center (Alt.) Bell Atlantic Corporation . .

35、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . John W. Seazholtz Roger Nucho (AIL) Bellcore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D

36、. S. Jordan James C. Staats (Alt.) iv Organization Represented Name of Representative BellSouth Telecommunications, Inc. Leonard Strickland, Jr. William J. McNamara, III (Alt.) Centel Corporation Bruce Becker Cincinnati Bell Telephone William P. Keidel Kevin R. Sullivan (Alt.) Exchange Carriers Stan

37、dards Association. . Joseph Mendoza Gregory L. Theus (Alt.) GTE Telephone Operations . Gregory L. Theus Richard L. Cochran (Alt.) National Telephone Cooperative Association . Joseph M. Flanigan NYNEX . James F. Baskin Jim Papadopoulos (Alt.) Pacific Bell Steve Grimm Sal R. Tesoro (AIL) Puerto Rico T

38、elephone Company . Segundo Ruiz Albert0 E. Morales (Alt.) Southwestern Bell Corporation Joseph Mendoza C. C. Bailey (AIL) Sprint - Local Telecommunications Division . Robert P. McCabe Harold L. Fuller (Alt.) US WEST James L. Eitel James Dahl (Alt.) GENERAL INTEREST Ashford Associates Donald A. Ashfo

39、rd Base-2 Systems, Inc Douglas M. Brady BT North America, Inc. Richard A. Rawson Michel J. Darnaud (Alt.) C.S.I. Telecommunications Michael S. Newman Cable Television Labs, Inc . Stephen D. Dukes James S. Meditch (Alt.) Capital Cities/ABC, Inc. . Warner W. Johnston Creative Communications Consulting

40、 . Richard Bobilin James Boe (AIL) Defense Information Systems Agency C. Joseph Pasquariello Granger Kelley (Alt.) GTE Mobile Communications . John C. Chiang Steve Pankow (Alt.) International Communications Association . Edward F. Bonkowski Robert M. Eilers (Alt.) National Communications System Denn

41、is Bodson Frank M. McClelland (Ah.) National Institute of Standards and Technology Robert Rountree, Jr. Michael D. Hogan (Alt.) National Telecommunications and Information Administration/Institute for Telecommunication Sciences (NTIA/ITS). . William F. Utlaut Neal B. Seitz (Alt.) NTT America, Inc. .

42、 Hideo Yamamoto Naobumi Kanemaki (Alt.) Rural Electrification Administration Donald M. Van Bellinger George J. Bagnall (Alt.) U. S. General Services Administration . Douglas K. Arai Larry L. Jackson (Alt.) Interexchange Carriers American Mobile Satellite Corporation . Michael K. Ward William Garner

43、(AIL) AT&T Communications Charles A. Dvorak Dennis Thovson (Alt.) Comsat Corporation Carl A. Sederquist Mark T. Neibert (Alt.) MCI Telecommunications Corporation Stephen J. Engelman Peter Guggina (Alt.) Sprint - Long Distance Division . Thomas G. Croda Peter J. May (Alt.) Telecom Canada . E. J. Exton Douglas I. Hughes (Alt.) v

展开阅读全文
相关资源
猜你喜欢
  • BS PD IEC TS 62763-2013_5284 Pilot function through a control pilot circuit using PWM (pulse width modulation) and a control pilot wire《通过控制导向线使用PWM (脉冲宽度调制) 的导向功能和控制导向线》.pdf BS PD IEC TS 62763-2013_5284 Pilot function through a control pilot circuit using PWM (pulse width modulation) and a control pilot wire《通过控制导向线使用PWM (脉冲宽度调制) 的导向功能和控制导向线》.pdf
  • BS ISO 8070-2007 Milk and milk products - Determination of calcium sodium potassium and magnesium contents - Atomic absorption spectrometric method《牛奶和奶制品 钙、钠、钾和镁含量的测定 原子吸.pdf BS ISO 8070-2007 Milk and milk products - Determination of calcium sodium potassium and magnesium contents - Atomic absorption spectrometric method《牛奶和奶制品 钙、钠、钾和镁含量的测定 原子吸.pdf
  • BS ISO 8082-1-2009 Self-propelled machinery for forestry - Laboratory tests and performance requirements for roll-over protective structures - General machines《林业用自推进机械 防倾.pdf BS ISO 8082-1-2009 Self-propelled machinery for forestry - Laboratory tests and performance requirements for roll-over protective structures - General machines《林业用自推进机械 防倾.pdf
  • BS ISO 8082-2-2011 Self-propelled machinery for forestry Laboratory tests and performance requirements for roll-over protective structures Machines having a rotating platf.pdf BS ISO 8082-2-2011 Self-propelled machinery for forestry Laboratory tests and performance requirements for roll-over protective structures Machines having a rotating platf.pdf
  • BS ISO 8083-2006 Machinery for forestry - Falling-object protective structures (FOPS) - Laboratory tests and performance requirements《林业机械 落体防护装置(FOPS) 实验室试验和性能要求》.pdf BS ISO 8083-2006 Machinery for forestry - Falling-object protective structures (FOPS) - Laboratory tests and performance requirements《林业机械 落体防护装置(FOPS) 实验室试验和性能要求》.pdf
  • BS ISO 8086-2004 Dairy plant - Hygiene conditions - General guidance on inspection and sampling procedures《乳品厂 卫生条件 检验和取样程序通用指南》.pdf BS ISO 8086-2004 Dairy plant - Hygiene conditions - General guidance on inspection and sampling procedures《乳品厂 卫生条件 检验和取样程序通用指南》.pdf
  • BS ISO 8096-2005 Rubber- or plastics-coated fabrics for water resistant clothing - Specification《雨衣用橡胶或塑料涂覆织物 规范》.pdf BS ISO 8096-2005 Rubber- or plastics-coated fabrics for water resistant clothing - Specification《雨衣用橡胶或塑料涂覆织物 规范》.pdf
  • BS ISO 8097-2001 Aircraft Minimum airworthiness requirements and test conditions for certified air cargo unit load devices《航空器 经认证的航空货运集装单元装置最低适航性要求和试验条件》.pdf BS ISO 8097-2001 Aircraft Minimum airworthiness requirements and test conditions for certified air cargo unit load devices《航空器 经认证的航空货运集装单元装置最低适航性要求和试验条件》.pdf
  • BS ISO 8114-1993 Textile machinery and accessories - Spindles for ring-spinning and doubling machines - List of equivalent terms《纺织机械和附件 环锭纺纱机和并线机用锭子 同义术语表》.pdf BS ISO 8114-1993 Textile machinery and accessories - Spindles for ring-spinning and doubling machines - List of equivalent terms《纺织机械和附件 环锭纺纱机和并线机用锭子 同义术语表》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1