1、BRITISH STANDARD AUTOMOBILE SERIES BS AU 215-3: 1988 ISO7707:1986 Power take offs (PTOs) Part3: Specification for dimensions of connections for rear mounted power take offs for commercial road vehicles ISO title: Commercial road vehicles Connections for rear-mounted power take-offs (PTO) UDC629.114.
2、4:629.113494BSAU215-3:1988 This BritishStandard, having been prepared under the directionof the Automobile Standards Committee, was published under the authority ofthe Board of BSI and comes into effect on 29 February1988 BSI01-2000 The following BSI references relate to the work on this standard: C
3、ommittee reference AUE/13 Draft for comment85/79127DC ISBN 0 580 16367 9 Committees responsible for this BritishStandard The preparation of this BritishStandard was entrusted by the Automobile Standards Committee (AUE/-) to Technical Committee AUE/13, upon which the following bodies were represented
4、: British Railways Board Department of Transport (Highways) Freight Transport Association Institute of Road Transport Engineers (Incorporated) London Regional Transport Ministry of Defence National Bus Company Road Haulage Association Ltd. Society of Motor Manufacturers and Traders Limited Amendment
5、s issued since publication Amd. No. Date of issue CommentsBSAU215-3:1988 BSI 01-2000 i Contents Page Committees responsible Inside front cover National foreword ii 1 Scope and field of application 1 2 Reference 1 3 Specifications 1 4 Designation 1 Publication referred to Inside back coverBSAU215-3:1
6、988 ii BSI 01-2000 National foreword This BritishStandard has been prepared under the direction of the Automobile Standards Committee and is identical with ISO7707:1986 “Commercial road vehicles Connections for rear-mounted power take-offs (PTO)”, published by the International Organization for Stan
7、dardization (ISO). BS AU215-1 specifies dimensions for the clearance envelope for PTOs. BSAU215-2 specifies dimensions of side openings for PTOs. Terminology and conventions. The text of the InternationalStandard has been approved as suitable for publication as a BritishStandard without deviation. S
8、ome terminology and certain conventions are not identical with those used in BritishStandards; attention is drawn especially to the following. The comma has been used as a decimal marker. In BritishStandards it is current practice to use a full point on the baseline as the decimal marker. Wherever t
9、he words “International Standard” or “ISO7707” appear, referring to this standard, they should be read as “BritishStandard” and “BS AU215-3” respectively. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their c
10、orrect application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-reference International Standard Corresponding BritishStandard ISO7706:1985 BS AU215 Power take offs (PTOs) Part1:1987 Specification for dimensions for clearance envelope for comme
11、rcial road vehicles (Identical) Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, pages1 to4, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the
12、amendment table on the inside front cover.BSAU215-3:1988 BSI 01-2000 1 1 Scope and field of application This International Standard specifies the essential dimensions of connections for rear-mounted power take-offs (PTO). These specifications are applicable to all installations of power take-offs at
13、 the back of transmission gearboxes of commercial vehicles. 2 Reference ISO7706, Road vehicles Commercial vehicles Clearance envelope for power take-offs (PTO). 3 Specifications This International Standard defines three connection types for rear-mounted PTOs: Type A is, however, recommended if the d
14、esign of the transmission permits. Type E may be used for stepped PTOs. 4 Designation Example for the designation of a type A connection for a rear-mounted PTO: PTO rear connection ISO7707-A Type A Type B Type EBS AU 215-3:1988 2 BSI 01-2000 NOTEThe length of bolts is specified by the manufacturer.B
15、SAU215-3:1988 BSI 01-2000 34 blankBSAU215-3:1988 BSI 01-2000 Publication referred to See national foreword.BS AU215-3: 1988 ISO7707:1986 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It present
16、s the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to
17、improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:0
18、2089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:0208996
19、9001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and i
20、nternational standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are
21、 kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the cop
22、yright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or other
23、wise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.
