1、BRITISH STANDARDBS EN 1146:2005Respiratory protective devices Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape Requirements, testing, marking The European Standard EN 1146:2005 has the status of a British StandardICS 13.340.30g49g50g3g38g50g51g60g44g49g4
2、2g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Sun Apr 30 02:41:30 BST 2006, Uncontrolled Copy, (c) BSIBS EN 1146:2005This British Standard was pu
3、blished under the authority of the Standards Policy and Strategy Committee on 2 February 2006 BSI 2 February 2006ISBN 0 580 47680 4National forewordThis British Standard is the official English language version of EN 1146:2005. It supersedes BS EN 1146:1997 which is withdrawn.The UK participation in
4、 its preparation was entrusted by Technical Committee PH/4, Respiratory protection, to Subcommittee PH/4/13, Breathing apparatus, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary.Cross-referencesThe British Standard
5、s which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This pub
6、lication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible internati
7、onal/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page,
8、 pages 2 to 31 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Sun Apr 30 02:41:30 BST 2006, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EUROPEN
9、NEEUROPISCHE NORMEN 1146September 2005ICS 13.340.30 Supersedes EN 1146:1997 English VersionRespiratory protective devices - Self-contained open-circuitcompressed air breathing apparatus incorporating a hood forescape - Requirements, testing, markingAppareils de protection respiratoire - Appareils de
10、protection respiratoire isolants autonomes circuit ouvert air comprim avec cagoule pour lvacuation - Exigences,essais, marquageAtemschutzgerte - Behltergerte mit Druckluft mit Haubefr Selbstrettung - Anforderungen, Prfung, KennzeichnungThis European Standard was approved by CEN on 22 July 2005.CEN m
11、embers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on applicat
12、ion to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the sa
13、me status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slov
14、enia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN nati
15、onal Members.Ref. No. EN 1146:2005: ELicensed Copy: Wang Bin, na, Sun Apr 30 02:41:30 BST 2006, Uncontrolled Copy, (c) BSIEN 1146:2005 (E) 2 Contents Page Foreword 4 Introduction5 1 Scope .6 2 Normative references .6 3 Terms and definitions.7 4 Description 7 5 Classification.7 6 Requirements 7 6.1 G
16、eneral 7 6.2 Ergonomics .7 6.3 Design8 6.4 Materials 8 6.5 Cleaning and disinfecting.8 6.6 Mass.9 6.7 Connections 9 6.8 Harness9 6.9 Handling.9 6.10 Leak tightness.9 6.11 Hood.10 6.11.1 General 10 6.11.2 Visor.10 6.11.3 Inward leakage 10 6.11.4 Hood material and seams (excluding visor and neck seals
17、) .10 6.12 Exhalation valves11 6.12.1 General 11 6.12.2 Performance 11 6.13 Temperature performance and flammability resistance 11 6.13.1 Pre-Conditioning.11 6.13.2 Temperature performance12 6.13.3 Flammability12 6.14 Protection against particulate matter12 6.15 High and medium pressure parts 12 6.1
18、6 High, medium and low pressure connections 13 6.17 Pressure vessel(s) 13 6.18 Pressure vessel seal.13 6.19 Pressure reducer.13 6.20 Pressure relief valve .13 6.20.1 General 13 6.20.2 Apparatus with a pressure relief valve13 6.20.3 Apparatus without a pressure relief valve 14 6.21 Pressure indicator
19、.14 6.22 Flexible hoses and tubes14 6.23 Mechanical strength .14 6.24 Performance requirements.14 6.24.1 Rated working duration 14 6.24.2 Inhalation and exhalation breathing resistance .14 6.24.3 Carbon dioxide content of the inhalation air 15 6.25 Protection against environment 15 6.26 Practical pe
20、rformance 15 Licensed Copy: Wang Bin, na, Sun Apr 30 02:41:30 BST 2006, Uncontrolled Copy, (c) BSIEN 1146:2005 (E) 3 7 Testing .16 7.1 General 16 7.2 Nominal values and tolerances16 7.3 Visual inspection 16 7.4 Mechanical strength .16 7.4.1 Vibration 16 7.4.2 Tensile force16 7.4.3 Mechanical strengt
21、h of visor16 7.4.4 Hood.17 7.5 Resistance to temperature .17 7.5.1 Breathing resistance at low temperature 17 7.5.2 Breathing resistance at high temperature 17 7.6 Leak tightness of the ready for use apparatus.17 7.7 Rated working duration 17 7.8 Insulation resistance of non-metallic carrying/storag
22、e containers 17 7.9 Carbon dioxide content of the inhalation air 18 7.10 Flammability18 7.11 Pressure reducer 18 7.11.1 General 18 7.11.2 Apparatus with a pressure relief valve18 7.11.3 Apparatus without a pressure relief valve 18 7.12 Practical performance 18 7.12.1 General 18 7.12.2 Escape tests18
23、 7.12.3 Low temperature practical performance test19 7.13 Inhalation and exhalation breathing resistance .19 7.14 Inward leakage 20 8 Marking 20 9 Information supplied by the manufacturer20 Annex A (normative) Methods of measurement of the electrical resistance of the carrying/storage container25 A.
24、1 Voltmeter ammeter method25 A.2 Comparative method 25 Annex B (informative) Marking28 Annex ZA (informative) Clauses of this European Standard addressing essential requirements or other provisions of EU Directives29 Annex ZB (informative) Relationship between this European Standard and the Essentia
25、l Requirements of EU Directive 97/23/EC (PED) .30 Bibliography.31 Licensed Copy: Wang Bin, na, Sun Apr 30 02:41:30 BST 2006, Uncontrolled Copy, (c) BSIEN 1146:2005 (E) 4 Foreword This European Standard (EN 1146:2005) has been prepared by Technical Committee CEN/TC 79 “Respiratory protective devices“
26、, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2006, and conflicting national standards shall be withdrawn at the latest by April 2006. This Europ
27、ean Standard supersedes EN 1146:1997. This European Standard has been prepared under a mandate given to CEN/CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s) 89/686/EEC and 97/23/EEC. For relationship with EU Directive(
28、s), see informative Annexes ZA and ZB, which is an integral part of this European Standard. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denm
29、ark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: Wang Bin, na, Sun Apr 30 02:41:30 BST 2006, Uncontrolled Co
30、py, (c) BSIEN 1146:2005 (E) 5 Introduction A given respiratory protective device can only be approved when the individual components satisfy the requirements of the test specification which may be a complete European Standard or part of a European Standard and practical performance tests have been c
31、arried out successfully on complete apparatus where specified in the appropriate European Standard. If for any reason a complete apparatus is not tested then simulation of the apparatus is permitted provided the respiratory characteristics and weight distribution are similar to those of the complete
32、 apparatus. Licensed Copy: Wang Bin, na, Sun Apr 30 02:41:30 BST 2006, Uncontrolled Copy, (c) BSIEN 1146:2005 (E) 6 1 Scope This European Standard specifies minimum requirements for self-contained open-circuit compressed air breathing apparatus for escape only, incorporating a hood. Such equipment i
33、s intended for use in work situations where the risk on overpressurisation of the pressure vessels with their valves due to hot environmental conditions is low. Laboratory and practical performance tests are included for the assessment of compliance with the requirements. This European Standard does
34、 not apply to apparatus for work or to diving devices. 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced documen
35、t (including any amendments) applies. EN 132:1998, Respiratory protective devices Definitions of terms and pictograms EN 134:1998, Respiratory protective devices Nomenclature of components EN 1964-1, Transportable gas cylinders Specification for the design and construction of refillable transportabl
36、e seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres Part 1: Cylinders made of seamless steel with an Rmvalue of less than 1100 MPa EN 1964-2, Transportable gas cylinders Specification for the design and construction of refillable transportable seamless st
37、eel gas cylinders of water capacities from 0,5 litre up to and including 150 litres Part 2: Cylinders made of seamless steel with an Rmvalue of 1100 MPa and above EN 1964-3, Transportable gas cylinders Specification for the design and construction of refillable transportable seamless steel gas cylin
38、ders of water capacity from 0,5 litre up to and including 150 litres Part 3: Cylinders made of seamless stainless steel with an Rmvalue of less than 1100 MPa EN 1975, Transportable gas cylinders Specification for the design and construction of refillable transportable seamless aluminium and aluminiu
39、m alloy gas cylinders of capacity from 0,5 litre up to 150 litre EN 12021, Respiratory protective devices Compressed air for breathing apparatus EN 12245, Transportable gas cylinders Fully wrapped composite cylinders EN 13274-1, Respiratory protective devices Methods of test Part 1: Determination of
40、 inward leakage and total inward leakage EN 13274-2:2001, Respiratory protective devices Methods of test Part 2: Practical performance tests EN 13274-3:2001, Respiratory protective devices Methods of test Part 3: Determination of breathing resistance EN 13274-4:2001, Respiratory protective devices M
41、ethods of test Part 4: Flame tests EN 13274-5, Respiratory protective devices Methods of test Part 5: Climatic conditions EN 13274-6, Respiratory protective devices Methods of test Part 6: Determination of carbon dioxide content of the inhalation air Licensed Copy: Wang Bin, na, Sun Apr 30 02:41:30
42、BST 2006, Uncontrolled Copy, (c) BSIEN 1146:2005 (E) 7 EN ISO 4674-1:2003, Rubber or plastic-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods (ISO 4674-1:2003) EN ISO 4674-2:2003, Rubber or plastic-coated fabrics Determination of tear resistance Part 1: Ballistic
43、 pendulum method (ISO 4674-2:1998) EN ISO 7854:1997, Rubber- or plastics-coated fabrics Determination of resistance to damage by flexing (ISO 7854:1995) EN ISO 13934-2, Textiles Tensile properties of fabrics Part 2: Determination of maximum force using the grab method (ISO 13934-4:1999) 3 Terms and
44、definitions For the purposes of this European Standard, the terms and definitions given in EN 132:1998 and the nomenclature given in EN 134:1998 apply. 4 Description Compressed air escape apparatus with hood are designed and constructed to enable the wearer to breathe air supplied to a hood from a p
45、ressure vessel(s) via a pressure reducer giving a continuous flow of air. The exhaled air may pass without re-circulation from the hood via the exhalation valve to the ambient atmosphere. This apparatus typically comprises pressure vessel(s), body harness, lung governed demand valve, pressure indica
46、tor(s), warning device (optional), connecting hoses and tubes and a hood. 5 Classification Compressed air escape apparatus with hood are classified according to the rated working duration (see 6.24.1 and 6.24.3 in accordance with 7.7 and 7.9, whatever comes first) which is defined by performing a br
47、eathing machine test in accordance with 7.7 with a minute volume of 35 l/min (20 cycles/min, 1,75 l/stroke). Rated working duration is defined in steps of 5 min, starting with 5 min as a minimum, up to a maximum of 30 min rated working duration since the necessary escape time is considered to be the
48、 classification. 6 Requirements 6.1 General In all tests all test samples shall meet the requirements. Wherever a test clause is referenced, all sub-clauses of the test clause shall apply, unless otherwise stated. 6.2 Ergonomics The requirements of this European Standard are intended to take account
49、 of the interaction between the wearer, the apparatus, and where possible the working environment in which the apparatus is likely to be used. The device shall satisfy 6.3, 6.8 and 6.26. Licensed Copy: Wang Bin, na, Sun Apr 30 02:41:30 BST 2006, Uncontrolled Copy, (c) BSIEN 1146:2005 (E) 8 6.3 Design The diameter of pressurised parts downstream of the shut-off valve(s) shall not exceed 32 mm. The apparatus shall be designed so as not to interfere with work activities when carried in accordance with the manu
