1、BS EN 2815:2009ICS 49.025.10NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAerospace series Steel FE-PM1802 (X5CrNiCu15-5) Consumable electrode remelted Solution treated and precipitation treated Bar for machining a or D null 200 mm Rm null965 MPaThis British S
2、tandard was published under the authority of the Standards Policy and Strategy Committee on 31October 2009 BSI 2009ISBN 978 0 580 68926 0Amendments/corrigenda issued since publicationDate CommentsBS EN 2815:2009National forewordThis British Standard is the UK implementation of EN 2815:2009. The UK p
3、articipation in its preparation was entrusted to TechnicalCommittee ACE/61/-/15, Steels.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for i
4、ts correct application. Compliance with a British Standard cannot confer immunityfrom legal obligations.BS EN 2815:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2815 September 2009 ICS 49.025.10 English Version Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remel
5、ted - Solution treated and precipitation treated - Bar for machining - a or D 200 mm - Rm 965 MPa Srie arospatiale - Acier FE-PM1802 (X5CrNiCu15-5) - Refondu llectrode consommable - Mis en solution et vieilli - Barres pour usinage - a ou D 200 mm - Rm 965 MPa Luft- und Raumfahrt - Stahl FE-PM1802 (X
6、5CrNiCu15-5) - Mit selbstverzehrender Elektrode umgeschmolzen - Lsungsgeglht und ausgelagert - Stangen zur spanenden Bearbeitung - a oder D 200 mm - Rm 965 MPa This European Standard was approved by CEN on 1 August 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
7、 stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Sta
8、ndard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national s
9、tandards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United
10、 Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2815:2009: EBS
11、 EN 2815:2009EN 2815:2009 (E) 2 Foreword This document (EN 2815:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the a
12、pproval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2010, and con
13、flicting national standards shall be withdrawn at the latest by March 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According
14、to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Li
15、thuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 2815:2009EN 2815:2009 (E) 3 Introduction This standard is part of the series of EN metallic material standards for aerospace applications. The gene
16、ral organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-5. BS EN 2815:2009EN 2815:2009 (E) 4 1 Scope This standard specifies the requirements relating to: Steel FE-PM1802 (X5CrNiCu15-5) Consumable electrode remelted Solution treated and pre
17、cipitation treated Bar for machining a or D 200 mm Rm 965 MPa for aerospace applications. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition
18、 of the referenced document (including any amendments) applies. EN 2043, Aerospace series Metallic materials General requirements for semi-finished product qualification (excluding forgings and castings). 1)EN 4258, Aerospace series Metallic materials General organization of standardization Links be
19、tween types of EN standards and their use. EN 4436, Aerospace series Steel Test methods Determination of ferrite content.1)EN 4500-5, Aerospace series Metallic materials Rules for drafting and presentation of material standards Part 5: Specific rules for steels.1) EN 4700-002, Aerospace series Steel
20、 and heat resisting alloy Wrought products Technical specification Part 002: Bar and section. 1)1) Published as ASD Prestandard at the date of publication of this standard. BS EN 2815:2009EN 2815:2009 (E) 5 1 Material designation Steel FE-PM1802 (X5CrNiCu15-5) 2 Chemical composition % Element C Si M
21、n P S Cr Mo Ni Cu Nb + Ta Fe min. 14,0 3,5 2,5 5 C Base max. 0,07 1,00 1,00 0,030 0,015 15,5 0,50 5,5 4,5 0,45 3 Method of melting Consumable electrode remelted 4.1 Form Bar 4.2 Method of production 4.3 Limit dimension(s) mm a or D 200 5 Technical specification EN 4700-002 6.1 Delivery condition Sol
22、ution treated Solution treated and precipitation treated Heat treatment 1 025 C 1 055 C / t 30 min / AC or OQ+ cool to 30 C 1 025 C 1 055 C / t 30 min / AC or OQ + cool to 30 C + 580 C 610 C / t 4 h / AC 6.2 Delivery condition code W U 7 Use condition Solution treated and precipitation treated Deliv
23、ery condition Heat treatment Delivery condition + 580 C 610 C / t 4 h / AC Characteristics 8.1 Test sample(s) See EN 4700-002. 8.2 Test piece(s) See EN 4700-002. 8.3 Heat treatment Solution treated Use condition 9 Dimensions concerned mm a or D 75 75 a or D 200 10 Thickness of cladding on each face
24、% 11 Direction of test piece L L T 12 T Temperature C Ambient Ambient Ambient 13 Proof stress Rp0,2 MPa 790 790 790 14 Strength Rm MPa 965 965 965 15 Elongation A % 12 12 9 16 Reduction of area Z % 45 45 35 17 Hardness 363 HB 302 HB 363 302 HB 363 302 HB 363 18 Shear strength Rc MPa 19 Bending k 20
25、Impact strength KV J 100; Notch direction T 100; Notch direction T 70; Notch direction L 21 C Temperature C 22 Time h 23 Stress a MPa 24 Elongation a % 25 Rupture stress R MPa 26 Elongation at rupture A % 27 Notes (see line 98) BS EN 2815:2009EN 2815:2009 (E) 6 30 Microstructure EN 4436 2 One per ca
26、st 3 Corresponding to ingot top 7 The ferrite content shall not exceed 2 % 34 Grain size See EN 4700-002. 7 G 5 44 External defects See EN 4700-002. 1 Visual 50 Cleanliness/inclusion content See EN 4700-002. (micro-cleanness) 7 Category 4 51 Macrostructure See EN 4700-002. 7 Class Condition Severity
27、 1 Freckles A 2 White spots A 3 Radial segregation A 4 Ring pattern B 61 Internal defects See EN 4700-002. 6 a or D 100 mm may be tested either on the product or at an earlier stage of manufacturing. 7 Class 3 95 Marking inspection See EN 4700-002. 96 Dimensional inspection See EN 4700-002. 98 Notes
28、 99 Typical use BS EN 2815:2009EN 2815:2009 (E) 7 100 Product qualification See EN 2043. Qualifcation programe to be agred betwen manufacturer and purchaser. BS EN2815:2009BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards Ins
29、titutionBSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of BritishStandards should
30、 make sure that they possess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of our products and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis British Standard would inform the Secretary of the technical committeeresp
31、onsible, the identity of which can be found on the inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Buying standardsOrders for all B
32、SI, international and foreign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on the Website http:/ response to orders for international standards, it is BSI
33、 policy to supply theBSI implementation of those that have been published as British Standards,unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European andinternational standards through its Library and its Technical Help to ExportersService.
34、Various BSI electronic information services are also available whichgive details on all its products and services. Contact Information Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standards developmentsand receive substantial dis
35、counts on the purchase price of standards. For detailsof these and other benefits contact Membership Administration. Tel: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British StandardsOnline can be found at http:/ information about B
36、SI is available on the BSI website at http:/.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in theUK, of the publications of the international standardization bodies. Except aspermitted under the Copyright, Designs and Patents Act 1988 no extract maybe reproduced,
37、 stored in a retrieval system or transmitted in any form or by anymeans electronic, photocopying, recording or otherwise without prior writtenpermission from BSI.This does not preclude the free use, in the course of implementing the standard,of necessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email:
