1、BS EN6049-002:2010ICS 49.060NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAerospace series Electrical cables,installation Protection sleeve inmeta-aramid fibresPart 002: General and list of productstandardsThis British Standardwas published under theauthority
2、of the StandardsPolicy and StrategyCommittee on 31 May2010. BSI 2010ISBN 978 0 580 63611 0Amendments/corrigenda issued since publicationDate CommentsBS EN 6049-002:2010National forewordThis British Standard is the UK implementation of EN 6049-002:2010.The UK participation in its preparation was entr
3、usted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for
4、 its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.BS EN 6049-002:2010EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 6049-002 April 2010 ICS 49.060 English Version Aerospace series - Electrical cables, installation - Protection sleeve in me
5、ta-aramid fibres - Part 002: General and list of product standards Srie arospatiale - Cbles lectriques, installation - Gaine de protection en fibres mta-aramides - Partie 002 : Gnralits et liste des normes de produit Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschluche aus Meta
6、-Aramidfasern - Teil 002: Allgemeines und Liste der Produktnormen This European Standard was approved by CEN on 16 January 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standar
7、d without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other la
8、nguage made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Est
9、onia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUR
10、OPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 6049-002:2010: EBS EN 6049-002:2010EN 6049-002:2010 (E) 2 Contents Page Foreword 31 Scope 42 Norm
11、ative references 43 List of Product standards with their particular application.44 Quality assurance 55 Technical specification .5BS EN 6049-002:2010EN 6049-002:2010 (E) 3 Foreword This document (EN 6049-002:2010) has been prepared by the Aerospace and Defence Industries Association of Europe - Stan
12、dardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shal
13、l be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2010, and conflicting national standards shall be withdrawn at the latest by October 2010. Attention is drawn to the possibility that some of the elements of this docu
14、ment may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard:
15、Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingd
16、om. BS EN 6049-002:2010EN 6049-002:2010 (E) 4 1 Scope This standard provides a list of all parts of sleeves in meta-aramid fibres EN 6049 required for the protection of cable and cable bundles for aerospace application. 2 Normative references The following referenced documents are indispensable for
17、the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 6049-001, Aerospace series Electrical cables, installation Protection sleeve in meta-aramid fibres Part
18、 001: Technical specification 1)EN 6049-003, Aerospace series Electrical cables, installation Protection sleeve in meta-aramid fibres Part 003: Braided, tubular, expandable Product standard EN 6049-004, Aerospace series Electrical cables, installation Protection sleeve in meta-aramid fibres Part 004
19、: Braided, tubular, high expandable Product standard 1)EN 6049-005, Aerospace series Electrical cables, installation Protection sleeve in meta-aramid fibres Part 005: Sleeve flexible, post installation Product standard 1)EN 6049-006, Aerospace series Electrical cables, installation Protection sleeve
20、 in meta-aramid fibres Part 006: Self-wrapping protective sleeve, flexible post installation Product standard 1)EN 6049-007, Aerospace series Electrical cables, installation Protection sleeve in meta-aramid fibres Part 007: Self-wrapping mechanical and electrical protective sleeve, post installation
21、, high temperature Product standard 2)EN 6049-008, Aerospace series Electrical cables, installation Protection sleeve in meta-aramid fibres Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from 55 C to 200 C Product s
22、tandard 1)EN 6049-009, Aerospace series Electrical cables, installation Protection sleeve in meta-aramid fibres Part 009: Self-wrapping fire protection sleeve, flexible post installation operating temperature from 55 C to 260 C Product standard 1)EN 9133, Aerospace series Quality management systems
23、Qualification procedure for aerospace standard parts 3 List of Product standards with their particular application See Table 1. 1) Published as ASD-STAN Prestandard at the date of publication of this standard. 2) In preparation at the date of publication of this standard. BS EN 6049-002:2010EN 6049-
24、002:2010 (E) 5 Table 1 Sleeve Description Temp range Application EN 6049-003 Braid sleeve, tubular, expandable product (ratio 1:2) 55 C to 240 C (or 175 C see note) Mechanical protection braided sleeve, standard EN 6049-004 Braid sleeve, tubular, high expandable product (ratio 1:3) Mechanical protec
25、tion braided sleeve High expansion for repair or adaptation to high expansion needs EN 6049-005 Sleeve flexible, post installation, close with hook and loop 55 C to 175 C Mechanical protection open sleeve close with hook and loop EN 6049-006 Self-wrapping protective sleeve, post installation 55 C to
26、 200 C Mechanical protection self-wrapping sleeve, standard EN 6049-007 Self-wrapping protective sleeve, post installation, high temperature 55 C to 260 C Mechanical and Electrical protection self-wrapping sleeve High Temp EN 6049-008 Self-wrapping shielded (EMI) protective sleeve, flexible, post in
27、stallation (-006 + screen) 55 C to 240 C Mechanical and EMI protection self-wrapping sleeve, standard EN 6049-009 Self-wrapping fire protection sleeve, flexible, post installation 55 C to 260 C Mechanical and Fire protection self-wrapping sleeve, standard NOTE Above 175 C, loss of water repellent pr
28、operties. 4 Quality assurance See EN 9133. 5 Technical specification See EN 6049-001. BS EN6049-002:2010BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body responsible for prepari
29、ng BritishStandards. It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is
30、the constant aim of BSI to improve the quality of our products and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis British Standard would inform the Secretary of the technical committeeresponsible, the identity of which can be found on the inside front cove
31、r. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should beaddres
32、sed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on the Website http:/ response to orders for international standards, it is BSI policy to supply theBSI implementation of those that have been publ
33、ished as British Standards,unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European andinternational standards through its Library and its Technical Help to ExportersService. Various BSI electronic information services are also available which
34、give details on all its products and services. Contact Information Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standards developmentsand receive substantial discounts on the purchase price of standards. For detailsof these and o
35、ther benefits contact Membership Administration. Tel: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British StandardsOnline can be found at http:/ information about BSI is available on the BSI website at http:/.CopyrightCopyright subs
36、ists in all BSI publications. BSI also holds the copyright, in theUK, of the publications of the international standardization bodies. Except aspermitted under the Copyright, Designs and Patents Act 1988 no extract maybe reproduced, stored in a retrieval system or transmitted in any form or by anyme
37、ans electronic, photocopying, recording or otherwise without prior writtenpermission from BSI.This does not preclude the free use, in the course of implementing the standard,of necessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email:
