1、BSI Standards PublicationBS EN 853:2015Rubber hoses and hoseassemblies Wire braidreinforced hydraulic type SpecificationBS EN 853:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 853:2015. It supersedes BS EN 853:1997, which is withdrawn.BSI, as a member of
2、CEN, is obliged to publish EN 853 as a British Standard. However, attention is drawn to the fact that during the development of this European Standard, the UK committee voted against its approval as a European Standard. This is due to concerns about the abrasion test method detailed in Annex A (norm
3、ative). It is the opinion of the UK committee that the abrasion test method is not reliable and gives inconsistent results.The UK participation in its preparation was entrusted to Technical Committee PRI/66, Rubber and plastics tubing, hoses and hose assemblies.A list of organizations represented on
4、 this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 76533
5、9ICS 23.040.70; 23.100.40Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2015.Amendments/corrigenda issued since publicationDate Text affectedBS EN 853:
6、2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 853 April 2015 ICS 23.100.40; 23.040.70 Supersedes EN 853:1996English Version Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification Tuyaux et flexibles en caoutchouc - Type hydraulique avec armature de fils mt
7、allique tresss - Spcification Gummischluche und -schlauchleitungen - Hydraulikschluche mit Drahtgeflechteinlage - SpezifikationThis European Standard was approved by CEN on 31 January 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for g
8、iving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three o
9、fficial versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies
10、 of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spai
11、n, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide
12、 for CEN national Members. Ref. No. EN 853:2015 EBS EN 853:2015EN 853:2015 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Types of hoses .5 4 Materials and construction .5 4.1 Hoses 5 4.2 Hose assemblies 5 5 Dimensions .5 5.1 Diameters and concentricity .5 5.2 Length .7 5.2.1 Ho
13、ses 7 5.2.2 Hose assemblies 7 6 Requirements .8 6.1 Hydrostatic requirements .8 6.2 Minimum bend radius 9 6.3 Impulse test requirements 9 6.4 Leakage of hose assemblies 9 6.5 Cold flexibility . 10 6.6 Adhesion between components 10 6.7 Vacuum resistance . 10 6.8 Abrasion resistance . 11 6.9 Fluid re
14、sistance. 11 6.9.1 Test pieces 11 6.9.2 Oil resistance 11 6.9.3 Water based fluid resistance . 11 6.9.4 Water resistance . 11 6.10 Ozone resistance 11 7 Designation . 11 8 Marking 12 8.1 Hoses . 12 8.2 Hose assemblies . 12 Annex A (normative) Procedure for the measurement of abrasion 13 A.1 Apparatu
15、s 13 A.2 Method . 14 A.3 Test pieces 14 A.4 Condition of test pieces . 14 A.5 Procedure 15 A.6 Expression of results . 15 A.7 Test report . 15 Annex B (normative) Type and routine testing of production hoses . 16 Annex C (informative) Production acceptance testing . 17 BS EN 853:2015EN 853:2015 (E)B
16、S EN 853:2015EN 853:2015 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Types of hoses .5 4 Materials and construction .5 4.1 Hoses 5 4.2 Hose assemblies 5 5 Dimensions .5 5.1 Diameters and concentricity .5 5.2 Length .7 5.2.1 Hoses 7 5.2.2 Hose assemblies 7 6 Requirements .8 6.
17、1 Hydrostatic requirements .8 6.2 Minimum bend radius 9 6.3 Impulse test requirements 9 6.4 Leakage of hose assemblies 9 6.5 Cold flexibility . 10 6.6 Adhesion between components 10 6.7 Vacuum resistance . 10 6.8 Abrasion resistance . 11 6.9 Fluid resistance. 11 6.9.1 Test pieces 11 6.9.2 Oil resist
18、ance 11 6.9.3 Water based fluid resistance . 11 6.9.4 Water resistance . 11 6.10 Ozone resistance 11 7 Designation . 11 8 Marking 12 8.1 Hoses . 12 8.2 Hose assemblies . 12 Annex A (normative) Procedure for the measurement of abrasion 13 A.1 Apparatus 13 A.2 Method . 14 A.3 Test pieces 14 A.4 Condit
19、ion of test pieces . 14 A.5 Procedure 15 A.6 Expression of results . 15 A.7 Test report . 15 Annex B (normative) Type and routine testing of production hoses . 16 Annex C (informative) Production acceptance testing . 17 BS EN 853:2015EN 853:2015 (E) 3 Foreword This document (EN 853:2015) has been pr
20、epared by Technical Committee CEN/TC 218 “Rubber and plastics hoses and hose assemblies”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2015 and
21、conflicting national standards shall be withdrawn at the latest by October 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This
22、document supersedes EN 853:1996. In comparison with EN 853:1996, the following significant changes have been made: updated normative references; tolerances for inside diameter in Table 1; added Annex A; added Annex B; added Annex C. According to the CEN-CENELEC Internal Regulations, the national sta
23、ndards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
24、Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 853:2015EN 853:2015 (E)BS EN 853:2015EN 853:2015 (E) 4 1 Scope This European Standard specifies requirements for four types of wire braid reinforced
25、 hoses and hose assemblies of nominal bore from 5 to 51. They are suitable for use with: hydraulic fluids in accordance with ISO 6743-4 with the exception of HFD R, HFD S and HFD T at temperatures ranging from -40 C to +100 C; water based fluids at temperatures ranging from -40 C to +70 C; water at
26、temperatures ranging from 0 C to +70 C. This European Standard does not include requirements for end fittings. It is limited to the performance of hoses and hose assemblies. NOTE 1 The hoses are not suitable for use with castor oil based and ester based fluids. NOTE 2 Hoses and hose assemblies are n
27、ot be operated outside the limits of this standard. NOTE 3 Requirements for hydraulic hoses for underground mining are standardized in separate standards. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its ap
28、plication. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 1302, Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation (ISO 130
29、2) EN ISO 1402:2009, Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009) EN ISO 4671, Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671) EN ISO 6743-4, Lubricants, industrial
30、oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) (ISO 6743-4) EN ISO 6803, Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803) EN ISO 7233, Rubber and plastics hoses and hose assemblies - Determination o
31、f resistance to vacuum (ISO 7233) EN ISO 7326, Rubber and plastics hoses - Assessment of ozone resistance under static conditions (ISO 7326) EN ISO 8033:2006, Rubber and plastics hoses - Determination of adhesion between components (ISO 8033) EN ISO 10619-2, Rubber and plastics hoses and tubing - Me
32、asurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2) ISO 1817:2005, Rubber, vulcanized - Determination of the effect of liquids ISO 23529, Rubber - General procedures for preparing and conditioning test pieces for physical test methods BS EN 853:20
33、15EN 853:2015 (E)BS EN 853:2015EN 853:2015 (E) 4 1 Scope This European Standard specifies requirements for four types of wire braid reinforced hoses and hose assemblies of nominal bore from 5 to 51. They are suitable for use with: hydraulic fluids in accordance with ISO 6743-4 with the exception of
34、HFD R, HFD S and HFD T at temperatures ranging from -40 C to +100 C; water based fluids at temperatures ranging from -40 C to +70 C; water at temperatures ranging from 0 C to +70 C. This European Standard does not include requirements for end fittings. It is limited to the performance of hoses and h
35、ose assemblies. NOTE 1 The hoses are not suitable for use with castor oil based and ester based fluids. NOTE 2 Hoses and hose assemblies are not be operated outside the limits of this standard. NOTE 3 Requirements for hydraulic hoses for underground mining are standardized in separate standards. 2 N
36、ormative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendmen
37、ts) applies. EN ISO 1302, Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation (ISO 1302) EN ISO 1402:2009, Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009) EN ISO 4671, Rubber and plastics hoses and hose assem
38、blies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671) EN ISO 6743-4, Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) (ISO 6743-4) EN ISO 6803, Rubber or plastics hoses and hose assemb
39、lies - Hydraulic-pressure impulse test without flexing (ISO 6803) EN ISO 7233, Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233) EN ISO 7326, Rubber and plastics hoses - Assessment of ozone resistance under static conditions (ISO 7326) EN ISO 8033:2006,
40、 Rubber and plastics hoses - Determination of adhesion between components (ISO 8033) EN ISO 10619-2, Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2) ISO 1817:2005, Rubber, vulcanized - Determination of
41、the effect of liquids ISO 23529, Rubber - General procedures for preparing and conditioning test pieces for physical test methods BS EN 853:2015EN 853:2015 (E) 5 3 Types of hoses Four types of hoses are specified: 1) Type 1ST - hoses with a single braid of wire reinforcement; 2) Type 2ST - hoses wit
42、h two braids of wire reinforcement; 3) Type 1SN - hoses with a single braid of wire reinforcement; 4) Type 2SN - hoses with two braids of wire reinforcement. Types 1SN and 2SN shall be of the same reinforcement construction as types 1ST and 2ST, except that they shall have thinner covers designed to
43、 assemble with fittings that do not require removal of the cover or a portion of the cover. 4 Materials and construction 4.1 Hoses Hoses shall consist of an oil and water resistant synthetic rubber lining, one or two layers of high tensile steel wire and an oil and weather resistant rubber cover. 4.
44、2 Hose assemblies Hose assemblies shall only be manufactured with those hose fittings whose functionality has been verified in accordance with subclauses 6.1, 6.3, 6.4 and 6.5 of this European Standard. 5 Dimensions 5.1 Diameters and concentricity When measured in accordance with EN ISO 4671, the di
45、ameters of the hoses shall conform to the values given in Table 1. BS EN 853:2015EN 853:2015 (E)BS EN 853:2015EN853:2015(E)6Table1 Diameters ofhosesDimensionsinmillimetresexceptnominalboreNominal boreAll typesType 1STType 1SNType 2STType 2SNInsidediameterDiameteroverreinforcementOutsidediameterofhos
46、eOutsidediameterofhoseCover thicknessDiameteroverreinforcementOutsidediameterofhoseOutsidediameterofhoseCover thicknessmin.max.min.max.min.max.max.min.max.min.max.min.max.max.min.max.54,95,49,010,011,913,512,50,81,510,611,615,116,714,10,81,566,47,010,611,615,116,714,10,81,512,113,316,718,315,70,81,5
47、87,98,512,113,316,718,315,70,81,513,714,918,319,917,30,81,5109,510,114,515,719,020,618,10,81,516,117,320,622,219,70,81,51212,713,517,519,122,223,821,40,81,519,020,623,825,423,00,81,51615,816,720,622,225,427,024,50,81,522,223,827,028,626,20,81,51918,819,824,626,229,431,028,50,81,526,227,831,032,630,1
48、0,81,52525,426,432,534,137,139,136,60,81,534,135,738,540,938,91,02,03131,833,039,341,744,447,644,81,02,043,345,749,252,449,51,02,03838,139,345,648,050,854,052,11,52,549,652,055,658,855,91,32,55150,652,058,761,765,168,365,51,52,562,364,768,271,468,61,32,5BS EN 853:2015 EN 853:2015 (E)BS EN 853:2015EN
49、853:2015(E)6Table1 Diameters ofhosesDimensionsinmillimetresexceptnominalboreNominal boreAll typesType 1STType 1SNType 2STType 2SNInsidediameterDiameteroverreinforcementOutsidediameterofhoseOutsidediameterofhoseCover thicknessDiameteroverreinforcementOutsidediameterofhoseOutsidediameterofhoseCover thicknessmin.max.min.max.min.max.max.min.max.min.max.min.max.max.min.max.54,95,49,010,011,913,512,50,81,510,611,615,116,714,10,81,566,47,010,611,615,116,714,10,81,512,113,316,718,315,70,81,587,98,512,113,316,718,315,70,81,513,714,918,319,917,30,81
