1、BRITISH STANDARD BS EN 60512-11-9: 2002 Connectors for electronic equipment Tests and measurements Part 11-9: Climatic tests Test 11i: Dry heat The European Standard EN 60512-11-9:2002 has the status of a British Standard ICS 31.220.10 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIG
2、HT LAWBS EN 60512-11-9:2002 This British Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 20 May 2002 BSI 20 May 2001 ISBN 0 580 39645 2 National forewo
3、rd This British Standard is the official English language version of EN 60512-11-9:2002. It is identical with IEC 60512-11-9:2002. The UK participation in its preparation was entrusted by Technical Committee EPL/48, Electromechanical components for electronic equipment, to Subcommittee EPL/48/2, Con
4、nectors for electronic equipment, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC 27-1 has been renumbered
5、 as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the
6、BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are resp
7、onsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and kee
8、p the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright date displayed
9、in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 60512-11-9 NORME EUROPENNE EUROPISCHE NORM April 2002 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotec
10、hnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60512-11-9:2002 E ICS 31.220.10 English version Connectors for
11、 electronic equipment - Tests and measurements Part 11-9: Climatic tests - Test 11i: Dry heat (IEC 60512-11-9:2002) Connecteurs pour quipements lectroniques - Essais et mesures Partie 11-9: Essais climatiques - Essai 11i: Chaleur sche (CEI 60512-11-9:2002) Steckverbinder fr elektronische Einrichtung
12、en - Mess- und Prfverfahren Teil 11-9: Klimatische Prfungen - Prfung 11i: Trockene Wrme (IEC 60512-11-9:2002) This European Standard was approved by CENELEC on 2002-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Eur
13、opean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (En
14、glish, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria
15、, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.Foreword The text of document 48B/1148/FDIS, future edition 1 of IEC 60512-11-9, prepared by SC 48B, Connecto
16、rs, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60512-11-9 on 2002-04-01. The following dates were fixed: latest date by which the EN has to be implemented at national
17、level by publication of an identical national standard or by endorsement (dop) 2003-01-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2005-04-01 Annexes designated “normative“ are part of the body of the standard. In this standard, annex ZA is norma
18、tive. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60512-11-9:2002 was approved by CENELEC as a European Standard without any modification. _ Page2 EN60512119:2002 BSI20May2002CONNECTORS FOR ELECTRONIC EQUIPMENT TESTS AND MEASUREMENTS Part 11-9:
19、 Climatic tests Test 11i: Dry heat 1 General 1.1 Scope and object This part of IEC 60512, when required by the detail specification, is used for testing electromechanical components within the scope of IEC technical committee 48. This test may also be used for similar devices when specified in a det
20、ail specification. The object of this test is to define a standard test method to assess the ability of components to be stored and/or to function in a specified manner under specified conditions of dry heat. 1.2 Normative references The following referenced documents are indispensable for the appli
21、cation of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60068-2-2:1974, Environmental testing Part 2: Tests Test B: Dry heat IEC 60512-1-1, Connectors for electronic e
22、quipment Tests and measurements Part 1-1: General examination Test 1a: Visual examination IEC 60512-2-1, Connectors for electronic equipment Tests and measurements Part 2-1: Electrical continuity and contact resistance tests Test 2a: Contact resistance Millivolt level method IEC 60512-5:1992, Connec
23、tors for electronic equipment Tests and measurements Part 5: Static load tests (fixed components) IEC 60512-7:1993, Connectors for electronic equipment Tests and measurements Part 7: Mechanical operating tests and sealing tests IEC 60512-8:1993, Connectors for electronic equipment Tests and measurem
24、ents Part 8: Connector tests (mechanical) Page3 EN60512119:2002 BSI20May20022 Preparation 2.1 Preparation of the specimen Specimens shall be equipped with their normal accessories, mounted as specified in the detail specification. When required by the detail specification, the specimen shall be mate
25、d and unmated as many times as specified prior to testing. For each test carried out, the detail specification shall specify the condition of the component, for example mated or unmated. 2.2 Wiring of specimen Specimens shall be wired as specified in the detail specification. 2.3 Preconditioning Pre
26、conditioning shall be of at least 1 h, unless otherwise specified in the detail specification. 3 Test method 3.1 Conditioning This test shall be carried out in accordance with IEC 60068-2-2, Test Ba: Dry heat for non-heat-dissipating specimens with sudden change of temperature when no measurement is
27、 required during the test; Test Bb: Dry heat for non-heat-dissipating specimens with gradual change of temperature when measurements are required during the test; using the degree of severity specified in the detail specification. 3.2 Initial measurements Initial measurements shall be carried out as
28、 specified by the detail specification. 3.3 Measurements during the test When required by the detail specification, the measurements shall be carried out at the end of the test, while the specimen is still at the specified high temperature. 3.4 Final measurements The specimens shall be subjected to
29、the following tests, unless otherwise specified in the detail specification and shall meet the requirements specified in the detail specification. Contact resistance Millivolt level method: IEC 60512-2-1, Test 2a; Insertion and withdrawal forces: IEC 60512-7, Test 13b; Visual examination: IEC 60512-
30、1-1, Test 1a; Static load, axial: IEC 60512-5, Test 8b; Insert retention in housing (axial): IEC 60512-8, Test 15b; Immersion, water proof: IEC 60512-7,Test 14d. Page4 EN60512119:2002 BSI20May2002After conditioning, the specimen shall not be disturbed prior to the measurement of contact resistance.
31、4 Details to be specified When this test is required by the detail specification, the following details shall be specified: a) method of mounting and wiring the specimen; b) conditioning severity: temperature and number of days; c) initial measurements; d) requirements for the measurements; e) measu
32、rements during the test, if necessary; f) any deviation from the standard test method. Page5 EN60512119:2002 BSI20May2002Annex ZA (normative) Normative references to international publications with their corresponding European publications This European Standard incorporates by dated or undated refe
33、rence, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorpor
34、ated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD
35、 Year IEC 60068-2-2 1974 Basic environmental testing procedures Part 2: Tests - Test B: Dry heat EN 60068-2-2 1) 1993 IEC 60512-1-1 - 2) Connectors for electronic equipment - Tests and measurements Part 1-1: General examination - Test 1a: Visual examination EN 60512-1-1 2002 3) IEC 60512-2-1 - 2) Pa
36、rt 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method EN 60512-2-1 2002 3) IEC 60512-5 1992 Part 5: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests - IEC 60512-7 1993 Part 7: Mechanic
37、al operating tests and sealing tests - IEC 60512-8 1993 Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations -1)EN 60068-2-2 includes supplement A:1976 to IEC 60068-2-2. 2)Undated reference. 3)Valid edition at date of issue. Page6 EN60512119:2002 BSI20May2002BS EN 6
38、0512-11-9: 2002 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions B
39、ritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity
40、 while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that sub
41、scribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from th
42、e BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, Eur
43、opean and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. E
44、mail: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membe
45、rshipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the
46、UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without pr
47、ior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.
