1、BRITISH STANDARDBS EN 60512-16-9: 2008Connectors for electronic equipment Tests and measurements Part 16-9: Mechanical tests on contacts and terminations Test 16i: Grounding contact spring holding forceICS 31.220.10g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g5
2、4g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 60512-16-9:2008This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 August 2008 BSI 2008ISBN 978 0 580 55916 7National fore
3、wordThis British Standard is the UK implementation of EN 60512-16-9:2008. It is identical to IEC 60512-16-9:2008. The UK participation in its preparation was entrusted to Technical Committee EPL/48, Electromechanical components and mechanical structures for electronic equipment.A list of organizatio
4、ns represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Ame
5、ndments/corrigenda issued since publicationDate CommentsEUROPEAN STANDARD EN 60512-16-9 NORME EUROPENNE EUROPISCHE NORM July 2008 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central S
6、ecretariat: rue de Stassart 35, B - 1050 Brussels 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60512-16-9:2008 E ICS 31.220.10 English version Connectors for electronic equipment - Tests and measurements - Part 16-9: Mecha
7、nical tests on contacts and terminations - Test 16i: Grounding contact spring holding force (IEC 60512-16-9:2008) Connecteurs pour quipements lectroniques - Essais et mesures - Partie 16-9: Essais mcaniques des contacts et des sorties - Essai 16i: Force de maintien du ressort de contact de mise la m
8、asse (CEI 60512-16-9:2008) Steckverbinder fr elektronische Einrichtungen - Mess- und Prfverfahren - Teil 16-9: Mechanische Prfungen an Kontakten und Anschlssen - Prfung 16i: Haltekraft der Erdungsfeder (IEC 60512-16-9:2008) This European Standard was approved by CENELEC on 2008-06-01. CENELEC member
9、s are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application
10、 to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has
11、 the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlan
12、ds, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Foreword The text of document 48B/1872/FDIS, future edition 1 of IEC 60512-16-9, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for elec
13、tronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60512-16-9 on 2008-06-01. This standard is to be read in conjunction with EN 60512-1 and EN 60512-1-100 which explains the structure of the EN 60512 series. The following dates were fixed: latest date
14、by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-03-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2011-06-01 Annex ZA has been added by CENELEC. _ Endorsement noti
15、ce The text of the International Standard IEC 60512-16-9:2008 was approved by CENELEC as a European Standard without any modification. _ 2 BS EN 60512-16-9:2008CONNECTORS FOR ELECTRONIC EQUIPMENT TESTS AND MEASUREMENTS Part 16-9: Mechanical tests on contacts and terminations Test 16i: Grounding cont
16、act spring holding force 1 Scope and object This part of IEC 60512, when required by the detail specification, is used for testing electomechanical components within the scope of technical committee 48. This test may also be used for similar devices when specified in a detail specification. The obje
17、ct of this part of IEC 60512 is to detail a standard test method to determine the holding capacity of grounding contact springs by means of gauges. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition
18、 cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60512-1-1, Connectors for electronic equipment Tests and measurements Part 1-1: General examination Test 1a: Visual examination ISO 1302, Geometrical Product Specification (G
19、PS) Indication of surface texture in technical product documentation 3 Preparations 3.1 Preparation of specimen The specimen shall consist of a component with its terminations, and may be wired if so specified in the component detail specification. If lubricant is specified for use with the contact
20、system, it shall be applied in the manner specified in the component detail specification. Any preconditioning given in the component detail specification shall be applied. 3.2 Equipment Set(s) of gauges as specified in the component detail specification, shall be provided. 3.3 Mounting If mounting
21、of the specimen is appropriate, it shall be as specified in the component detail specification. 3 BS EN 60512-16-9:20084 Test methods 4.1 Method A Single contact gauges 4.1.1 Female contact springs Each contact to be tested shall have the maximum size gauge specified, engaged and separated three tim
22、es. After which, the minimum size retention force gauge specified shall be inserted. 4.1.2 Male contact springs Each contact to be tested shall have the minimum size gauge specified, engaged and separated three times. After which, the contact shall be inserted into the maximum size retention force g
23、auge specified. 4.2 Method B Multiple contact gauges As Method A, except that contacts shall be tested in specified groups using gauges having multiple contact engaging elements. After which appropriate individual maximum or minimum gauges shall be used. 4.3 Measurements and requirements 4.3.1 Befor
24、e testing Visual examination according to IEC 60512-1-1 shall be carried out. There shall be no defects, which would impair the validity of the test. 4.3.2 During testing Contacts shall support the weight of the individual contact retention force gauge in a vertically downward direction. 4.3.3 After
25、 testing Visual examination according to IEC 60512-1-1 shall be carried out. There shall be no defects that would impair the normal functioning of the component. Special attention shall be given to the resilient features of the specimen. 5 Details to be specified When this test is required by a deta
26、il specification, the following details shall be specified: a) whether preconditioning is required; b) nature and means of application of any lubricant to be applied; c) whether the specimen is to be wired, and if so, details of this; d) whether special mounting of the specimen is required; e) detai
27、ls of gauges to be used, including surface roughness, according to ISO 1302; f) number of specimens to be tested; g) any deviation from the standard test method. _ 4 BS EN 60512-16-9:2008Annex ZA(normative) Normative references to international publications with their corresponding European publicat
28、ions The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has b
29、een modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60512-1-1 -1)Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination EN 60512-1-1 20022)ISO 1302 -1)Geometric
30、al Product Specifications (GPS) - Indication of surface texture in technical product documentation EN ISO 1302 20022)1)Undated reference. 2)Valid edition at date of issue. 5 BS EN 60512-16-9:2008BS EN 60512-16-9: 2008BSI Group Headquarters389 Chiswick High Road,London W4 4AL, UKTel +44 (0)20 8996 90
31、01Fax +44 (0)20 8996 Standards Institution (BSI)BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or
32、 revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would info
33、rm the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000 Fax: +44 (0)20 8996 7400BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editio
34、ns of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001 Email: You may also buy directly using a debit/credit card from the BSI Shop on the Website http:/ response
35、 to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its
36、Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to
37、date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via Brit
38、ish Standards Online can be found at http:/ information about BSI is available on the BSI website at http:/.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Cop
39、yright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing th
40、e standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070 Email:
