1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationHand-held motor-operated electric tools Safety Part 2-18: Particular requirements for strapping toolsBS EN 60745-2-18:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 0
2、9/07/2010 03:47, Uncontrolled Copy, (c) BSINational forewordThis British Standard is the UK implementation of EN 60745-2-18:2009. Itwas derived by CENELEC from IEC 60745-2-18:2003. It supersedes BS EN 60745-2-18:2004+A1:2008, which will bewithdrawn on 1 April 2011.The CENELEC common modifications ha
3、ve been implemented at the appro-priate places in the text and are indicated by tags (e.g. ).The UK participation in its preparation was entrusted to Technical CommitteeCPL/116, Portable motor-operated tools.A list of organizations represented on this committee can be obtained onrequest to its secre
4、tary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010ISBN 978 0 580 64799 4ICS 25.140.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was publish
5、ed under the authority of the StandardsPolicy and Strategy Committee on 31 March 2010Amendments/corrigenda issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 60745-2-18:2009, incorporating amendment1:2008The start and finish of text introduced or altered by amendment is indicat
6、ed in the text by tags. Text indicating changes to IEC text carry the number of theIEC amendment. For example, text altered by IEC amendment 1 isindicated by .!“Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/07/2010 03:47, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 60745-2-18 NORME EU
7、ROPENNE EUROPISCHE NORM September 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation i
8、n any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60745-2-18:2009 E English version Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools (IEC 60745-2-18:2003, modified + A1:2008) Outils lectroportatifs moteur - Scurit
9、 - Partie 2-18: Rgles particulires pour les outils de cerclage (CEI 60745-2-18:2003, modifie + A1:2008) Handgefhrte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-18: Besondere Anforderungen fr Umreifungswerkzeuge (IEC 60745-2-18:2003, modifiziert + A1:2008) This European Standard was approv
10、ed by CENELEC on 2009-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nation
11、al standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language
12、and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
13、Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. ICS 25.140.20 Supersedes EN 60745-2-18:2004 + corr. Dec.2005 + A1:2008 + A11:2007BS EN 60745-2-18:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA S
14、TANDARDS, 09/07/2010 03:47, Uncontrolled Copy, (c) BSI- 2 - Foreword The text of the International Standard IEC 60745-2-18:2003, prepared by SC 61F (transformed into IEC TC 116, Safety of hand-held motor-operated electric tools), together with the common modifications prepared by the Technical Commi
15、ttee CENELEC TC 61F (transformed into TC 116) was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 60745-2-18 on 2004-03-01. A draft amendment (prAA) was prepared to align Subclause 6.2 with the new Subclause 6.2 in EN 60745-1. Moreover, vibration values determined with
16、 the new 6.2 are complying with the requirements of the Physical Agents Directive Vibration 2002/44/EC. The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as amendment A11 to EN 60745-2-18:2004 on 2007-06-01. The text of document 61F/677/CDV, future am
17、endment 1 to IEC 60745-2-18:2003 was submitted to the IEC-CENELEC parallel Unique Acceptance Procedure and was approved by CENELEC as amendment A1 to EN 60745-2-18:2004 on 2008-04-01. A further draft amendment (prAB), extending Annex ZZ to include the new MD 2006/42/EC, was submitted to the formal v
18、ote. The combined texts were approved by CENELEC as a new edition of EN 60745-2-18 on 2009-07-01. This European Standard supersedes EN 60745-2-18:2004 + corrigendum December 2005 + A11:2007 + A1:2008. The following dates were fixed: latest date by which the EN has to be implemented at national level
19、 by publication of an identical national standard or by endorsement (dop) 2010-07-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2011-04-01 This standard is divided into two parts: Part 1: General requirements which are common to most hand-held elec
20、tric motor operated tools (for the purpose of this standard referred to simply as tools) which could come within the scope of this standard; Part 2: Requirements for particular types of tools which either supplement or modify the requirements given in Part 1 to account for the particular hazards and
21、 characteristics of these specific tools. This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and supports the essential requirements of EC Directive 98/37/EC (Machinery Directive), amended by EC Directive 98/79
22、/EC, and of EC Directive 2006/42/EC. See Annexes ZZA and ZZB. Compliance with the clauses of Part 1 together with this Part 2 provides one means of conforming with the essential health and safety requirements of the Directive concerned. Warning: Other requirements and other EC Directives can be appl
23、icable to the products falling within the scope of this standard. This standard follows the overall requirements of EN ISO 12100-1 and EN ISO 12100-2. BS EN 60745-2-18:2009EN 60745-2-18:2009 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/07/2010 03:47, Uncontrolled Copy, (c) BSI- 3 - T
24、his Part 2-18 is to be used in conjunction with EN 60745-1:2009. When this standard states “addition“, “modification“ or “replacement“, the relevant text of Part 1 is to be adapted accordingly. Subclauses, tables and figures which are additional to those in Part 1 are numbered starting from 101. Sub
25、clauses, tables and figures which are additional to those in IEC 60745-2-18 are prefixed “Z”. NOTE In this standard the following print types are used: Requirements proper; Test specifications; Explanatory matter. BS EN 60745-2-18:2009EN 60745-2-18:2009 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA
26、 STANDARDS, 09/07/2010 03:47, Uncontrolled Copy, (c) BSI- 4 - Endorsement notice The text of the International Standard IEC 60745-2-18:2003 + A1:2008 was approved by CENELEC as a European Standard with agreed common modifications. BS EN 60745-2-18:2009EN 60745-2-18:2009 (E)Licensed Copy: Wang Bin, I
27、SO/EXCHANGE CHINA STANDARDS, 09/07/2010 03:47, Uncontrolled Copy, (c) BSI- 5 - Annex ZZ (informative) Coverage of Essential Requirements of EC Directives Annex ZZA (informative) Coverage of Essential Requirements of Directive 98/37/EC This European Standard has been prepared under a mandate given to
28、 CENELEC by the European Commission and the European Free Trade Association and within its scope the standard covers all relevant Essential Requirements as given in EC Directive 98/37/EC (Machinery Directive), amended by Directive 98/79/EC. Compliance with this standard provides one means of conform
29、ity with the specified essential requirements of the Directives concerned. WARNING: Other requirements and other EC Directives may be applicable to the products falling within the scope of this standard. Annex ZZB (informative) Coverage of Essential Requirements of Directive 2006/42/EC This European
30、 Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and within its scope the standard covers all relevant Essential Requirements as given in EC Directive 2006/42/EC (Machinery Directive). Compliance with this standard provid
31、es one means of conformity with the specified essential requirements of the Directive concerned. WARNING: Other requirements and other EC Directives may be applicable to the products falling within the scope of this standard. _ BS EN 60745-2-18:2009EN 60745-2-18:2009 (E)Licensed Copy: Wang Bin, ISO/
32、EXCHANGE CHINA STANDARDS, 09/07/2010 03:47, Uncontrolled Copy, (c) BSIHAND-HELD MOTOR-OPERATED ELECTRIC TOOLS SAFETY Part 2-18: Particular requirements for strapping tools1 Scope2 Normative referencesThis clause of Part 1 is applicable.3 Terms and DefinitionsThis clause of Part 1 is applicable, exce
33、pt as follows:Addition:3.101strapping tooltool for clinching straps on boxes4 General requirementsThis clause of Part 1 is applicable.5 General conditions for the testsThis clause of Part 1 is applicable.6 Environmental requirements This clause of Part 1 is applicable except as follows: 6.1.2.4 Modi
34、fication: Strapping tools are suspended with the motor axis horizontal. 6.1.2.5 Modification: Strapping tools are tested at no-load. This clause of Part 1 is applicable, except as follows: Addition: This standard applies to strapping tools. !“! “- 6 -BS EN 60745-2-18:2009EN 60745-2-18:2009 (E)Licens
35、ed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/07/2010 03:47, Uncontrolled Copy, (c) BSI7 ClassificationThis clause of Part 1 is applicable.8 Marking and instructionsThis clause of Part 1 is applicable.9 Protection against access to live partsThis clause of Part 1 is applicable.6.2 Vibration 6.
36、2.6.3 Operating conditions Modification: Table Z101 Operating conditions for strapping tools Orientation Clinching straps around a test package. The test package is a wooden box 1 m cubic with an internal bracing to prevent collapsing Tool bit Strapping material of medium width Grip force Hold the m
37、achine with normal gripping force, avoiding excessive gripping force Test cycle One test cycle is given by clinching one strap. Three series of five consecutive tests shall be carried out using a different operator for each series. 6.2.7.2 Declaration of the vibration total value Addition: The vibra
38、tion total value ahof the handle with the highest emission and the uncertainty K shall be declared. - 7 -BS EN 60745-2-18:2009EN 60745-2-18:2009 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/07/2010 03:47, Uncontrolled Copy, (c) BSI10 StartingThis clause of Part 1 is applicable.11 Inp
39、ut and currentThis clause of Part 1 is applicable.12 HeatingThis clause of Part 1 is applicable, except as follows:12.2 Replacement:The tool is operated for 30 cycles, each cycle comprising of clinching four straps around atest package within 2 min then the tool switched off for a period of 1 min. T
40、he test package isa wooden box 1 m cubic with an internal bracing to prevent collapsing.12.4 Replacement:The temperature rises are measured at the end of the “on“ period of the 30thcycle of 12.2 or,at the manufacturers option, the tool can be operated continuously until thermal stabilization.13 Leak
41、age currentThis clause of Part 1 is applicable.14 Moisture resistanceThis clause of Part 1 is applicable.15 Electric strengthThis clause of Part 1 is applicable.16 Overload protection of transformers and associated circuitsThis clause of Part 1 is applicable.17 EnduranceThis clause of Part 1 is appl
42、icable.18 Abnormal operationThis clause of Part 1 is applicable.19 Mechanical hazardsThis clause of Part 1 is applicable.- 8 -BS EN 60745-2-18:2009EN 60745-2-18:2009 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/07/2010 03:47, Uncontrolled Copy, (c) BSI- 9 -20 Mechanical strength21 Co
43、nstruction22 Internal wiringThis clause of Part 1 is applicable.21.Z1 This clause of Part 1 is not applicable.23 ComponentsThis clause of Part 1 is applicable.24 Supply connection and external flexible cordsThis clause of Part 1 is applicable.25 Terminals for external conductorsThis clause of Part 1
44、 is applicable. 26 Provision for earthingThis clause of Part 1 is applicable. 27 Screws and connectionsThis clause of Part 1 is applicable. 28 Creepage distances, clearances and distances through insulationThis clause of Part 1 is applicable. 29 Resistance to heat, fire and trackingThis clause of Pa
45、rt 1 is applicable. 30 Resistance to rustingThis clause of Part 1 is applicable. 31 Radiation, toxicity and similar hazardsThis clause of Part 1 is applicable.This clause of Part 1 is applicable, except as follows: 20.5 This subclause is not applicable. !“This clause of Part 1 is applicable, except
46、as follows: 21.32 This subclause is not applicable. !“ BS EN 60745-2-18:2009EN 60745-2-18:2009 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/07/2010 03:47, Uncontrolled Copy, (c) BSI- 10 -AnnexesThe annexes of Part 1 are applicable except as follows.BibliographyThe bibliography of Par
47、t 1 is applicable._Annex K (normative) Battery tools and battery packs K.1 Addition: All clauses of this Part 2 apply unless otherwise specified in this annex. K.12.2 This subclause of Part 2 is not applicable. K.12.4 This subclause of Part 2 is not applicable. Annex L (normative) Battery tools and
48、battery packs provided with mains connection or non-isolated sources L.1 Addition: All clauses of this Part 2 apply unless otherwise specified in this annex. _ !“BS EN 60745-2-18:2009EN 60745-2-18:2009 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/07/2010 03:47, Uncontrolled Copy, (c)
49、 BSIThis page deliberately left blankLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/07/2010 03:47, Uncontrolled Copy, (c) BSIBSI is the independent national body responsible for preparing British Standardsand other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road
