1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsWB9423_BSI_StandardColCov_noK_AW:BSI FRONT COVERS 5/9/08 12:55 Page 1Optical fibre cables Part 3-60: Outdoor cables Family specification fordrinking water pipe cables and subducts fo
2、r installationby blowing and/or pulling/dragging/floating in drinkingwater pipesBS EN 60794-3-60:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 20/01/2010 06:12, Uncontrolled Copy, (c) BSINational forewordThis British Standard is the UK implementation of EN 60794-3-60:2008. It isidentica
3、l to IEC 60794-3-60:2008.The UK participation in its preparation was entrusted by Technical CommitteeGEL/86, Fibre optics, to Subcommittee GEL/86/1, Optical fibres and cables. A list of organizations represented on this committee can be obtained onrequest to its secretary.The UK national committee w
4、ill be requesting an early revision of this standard because it contains clauses that remain under consideration; the UK committee does not consider this edition to have adequate guidance for the user.This publication does not purport to include all the necessary provisions of acontract. Users are r
5、esponsible for its correct application. BSI 2009 ISBN 978 0 580 58644 6 ICS 33.180.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2009Amendments is
6、sued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 60794-3-60:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 20/01/2010 06:12, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 60794-3-60 NORME EUROPENNE EUROPISCHE NORM December 2008 CENELEC European Committee for Electr
7、otechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. N
8、o. EN 60794-3-60:2008 E ICS 33.180.10 English version Optical fibre cables - Part 3-60: Outdoor cables - Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/floating in drinking water pipes (IEC 60794-3-60:2008) Cbles fibres optiques -
9、 Partie 3-60: Cbles extrieurs - Spcification de famille relative aux cbles et sous-conduits cheminant dans les conduites deau potable destins tre installs par soufflage et/ou par tirage/appareillage trainant/flottaison dans les conduites deau potable (CEI 60794-3-60:2008) Lichtwellenleiterkabel - Te
10、il 3-60: Auenkabel - Familienspezifikation fr Kabel in Trinkwasserleitungen und Schchten fr die Verlegung durch Einblasen und/oder Einschieben/Einziehen/Eingleiten in Trinkwasserleitungen (IEC 60794-3-60:2008) This European Standard was approved by CENELEC on 2008-11-01. CENELEC members are bound to
11、 comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Centra
12、l Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same stat
13、us as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Po
14、land, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 60794-3-60:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 20/01/2010 06:12, Uncontrolled Copy, (c) BSIEN 60794-3-60:2008 - 2 - Foreword The text of document 86A/1232/FDIS, future edition
15、 1 of IEC 60794-3-60, prepared by SC 86A, Fibres and cables, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60794-3-60 on 2008-11-01. This standard is to be used in conjunction with EN 60794-1-1, EN 60794-1-2 and EN 60794-3. The following
16、 dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-08-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2011-11-01 Annex ZA has been added
17、 by CENELEC. _ Endorsement notice The text of the International Standard IEC 60794-3-60:2008 was approved by CENELEC as a European Standard without any modification. _ BS EN 60794-3-60:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 20/01/2010 06:12, Uncontrolled Copy, (c) BSI- 3 - EN 607
18、94-3-60:2008 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references,
19、 the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60304 1982 Standard colours for insulation for lo
20、w-frequency cables and wires HD 402 S2 1984 IEC 60793-1-20 -1)Optical fibres - Part 1-20: Measurement methods and test procedures - Fibre geometry EN 60793-1-20 20022)IEC 60793-1-40 (mod) -1)Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation EN 60793-1-40 20032)IEC 607
21、93-1-44 -1)Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength EN 60793-1-44 20022)IEC 60793-2 -1)Optical fibres - Part 2: Product specifications - General EN 60793-2 20082)IEC 60793-2-50 -1)Optical fibres - Part 2-50: Product specifications - Sectional specifica
22、tion for class B single-mode fibres EN 60793-2-50 20082)IEC 60794-1-1 -1)Optical fibre cables - Part 1-1: Generic specification - General EN 60794-1-1 20022)IEC 60794-1-2 -1)Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures EN 60794-1-2 20032)IEC 60794-3 -1
23、)Optical fibre cables - Part 3: Sectional specification - Outdoor cables EN 60794-3 20022)IEC 60794-3-10 (mod) -1)Optical fibre cables - Part 3-10: Outdoor cables - Family specification for duct and directly buried optical telecommunication cables EN 60794-3-10 20022)IEC 60811-1-1 1993 Insulating an
24、d sheathing materials of electric and optical cables - Common test methods - Part 1-1: General application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties EN 60811-1-1 1995 1)Undated reference. 2)Valid edition at date of issue. BS EN 60794-3-60:200
25、8Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 20/01/2010 06:12, Uncontrolled Copy, (c) BSIEN 60794-3-60:2008 - 4 - Publication Year Title EN/HD Year IEC 60811-5-1 (mod) 1990 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific
26、 to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 C - D.C. resistivity at 23 C and 100 C EN 60811-5-1 1999 IEC 62305-1 -1)Protection against lightning - Part 1: General principles EN 62305
27、-1 + corr. November 20062)2006 BS EN 60794-3-60:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 20/01/2010 06:12, Uncontrolled Copy, (c) BSI 2 60794-3-60 IEC:2008(E) CONTENTS FOREWORD.4 1 Scope.6 2 Normative references .6 3 Symbols and abbreviations.7 4 Family specification for drinking w
28、ater pipe cables and subducts for installation by blowing and/or pulling/dragging/floating in drinking water pipes (blank detail specification and minimum requirements) .8 4.1 Construction8 4.1.1 General .8 4.1.2 Subducts .8 4.1.3 Drinking water pipe cables.8 4.2 Optical fibres.9 4.2.1 Single-mode d
29、ispersion unshifted (B1.1) optical fibre 9 4.2.2 Single-mode dispersion shifted (B2) optical fibre .9 4.2.3 Single-mode non-zero dispersion (B4) optical fibre10 4.2.4 Single-mode (B6) optical fibre .10 4.2.5 Multimode fibres 10 4.3 Drinking water pipe cable constructions.11 4.3.1 Cable for installat
30、ion within subducts (previously installed within the drinking water pipe) .11 4.3.2 Cable for direct installation into the drinking water pipes .12 4.3.3 Subduct construction .13 4.4 Installation and operating conditions .13 4.4.1 Tests applicable to cables/cable elements .13 4.4.2 Installation cond
31、itions13 4.5 Mechanical and environmental tests14 4.5.1 Subducts .14 4.5.2 Cable for installation within subducts (previously installed into the drinking water pipes) .17 4.5.3 Cables for direct installation into the drinking water pipe .21 Annex A (informative) Blank detail specification.25 Annex B
32、 (informative) OF cables for drinking water pipes 28 Annex C (informative) Examples of subducts and drinking water pipe cables .29 Annex D (informative) Example for installation schemes of optical fibre cables in drinking water pipes (fibre in drinking water pipes)31 Figure C.1 Examples of construct
33、ions of cables for installation in subducts within drinking water pipes29 Figure C.2 Examples of constructions for drinking water pipe cables .30 Figure D.1 Schematic drawing I/O-port for OF cables into drinking water lines31 Figure D.2 Schematic drawing Installation of OF cables in drinking water l
34、ines .32 Figure D.3 Installation of I/O-ports on high pressure PE drinking water pipe 32 Table 1 Single-mode dispersion unshifted (B1.1) optical fibre 9 Table 2 Single-mode dispersion shifted (B2) optical fibre.9 Table 3 Single-mode non-zero dispersion (B4) optical fibre10 BS EN 60794-3-60:2008Licen
35、sed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 20/01/2010 06:12, Uncontrolled Copy, (c) BSI60794-3-60 IEC:2008(E) 3 Table 4 Single-mode (B6) optical fibre .10 Table 5 Characteristics Cable for installation within subducts .11 Table 6 Characteristics Cable for direct installation within the high p
36、ressure gas pipe 12 Table 7 Characteristics Subduct construction13 Table 8 Tests applicable to cables/cable elements.13 Table 9 Subducts tests applicable.14 Table 10 Tests applicable to the cable for installation within subducts .17 Table 11 Tests applicable to the cables for direct installation int
37、o the drinking water pipe 21 Table A.1 Cable for installation within subducts .25 Table A.2 Cables for direct installation into the drinking water pipes 26 Table A.3 Subduct description .27 Table B.1 OF cables for drinking water pipes .28 BS EN 60794-3-60:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CH
38、INA STANDARDS, 20/01/2010 06:12, Uncontrolled Copy, (c) BSI 4 60794-3-60 IEC:2008(E) INTERNATIONAL ELECTROTECHNICAL COMMISSION _ OPTICAL FIBRE CABLES Part 3-60: Outdoor cables Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/floatin
39、g in drinking water pipes FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concern
40、ing standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
41、preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates clos
42、ely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the releva
43、nt subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the te
44、chnical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum e
45、xtent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for
46、 any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committ
47、ees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications
48、. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
49、rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60794-3-60 has been prepared by subcommittee 86A: Fibres and cables, of IEC technical committee 86: Fibre optics. This standard is to be used in conjunction with IEC 60794-1-1, IEC 60794-1-2 and IEC 60794-3. The text of this standard is based on the following documents: FDIS Report on voting 86A/1232/FDIS 86A/1243/RVD Full i
