1、BRITISH STANDARD BS EN 61305-1:1995 IEC 1305-1: 1995 Household high-fidelity audio equipment and systems Methodsofmeasuring and specifying the performance Part 1: General The European Standard EN61305-1:1995 has the status of a British Standard ICS33.160.00BSEN61305-1:1995 This British Standard, hav
2、ing been prepared under the directionof the Electrotechnical Sector Board, was published underthe authority of the Standards Board and comes into effect on 15 December 1995 BSI 10-1999 The following BSI references relate to the work on this standard: Committee reference EPL/84 Draft for comment 92/2
3、6953DC ISBN 0 580 24971 9 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee EPL/84, Equipment and systems in the field of audio, video and audiovisual engineering, upon which the following bodies were represented: Associati
4、on of British Theatre Technicians Audio Engineering Society British Broadcasting Corporation British Educational Supplies Association British Fire Protection Systems Association Limited British Kinematograph, Sound and Television Society British Radio and Electronic Equipment Manufacturers Associati
5、on British Telecommunications plc Consumers Association Federation of British Audio Federation of the Electronics Industry Independent Television Association Institution of Electrical Engineers International Association of Broadcasting Manufacturers National Council for Educational Technology (NCET)
6、 Professional Lighting and Sound Association Radio Electrical and Television Retailers Association Royal Institute of British Architects Royal National Institute for Deaf People Society of Cable Television Engineers Amendments issued since publication Amd. No. Date CommentsBSEN61305-1:1995 BSI 10-19
7、99 i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 Text of EN 61305-1 3BSEN61305-1:1995 ii BSI 10-1999 National foreword This British Standard has been prepared by Technical Committee EPL/84 and is the English language version of EN61305-1:1995 Household hig
8、h-fidelity audio equipment and systemsMethods of measuring and specifying the performancePart 1: General, published by the European Committee for Electrotechnical Standardization (CENELEC). It is identical with IEC1305-1:1995, published by the International Electrotechnical Commission (IEC). EN61305
9、 consists of the following Parts: Part 1: General; Part 2: FM radio tuners 1) ; Part 3: Amplifiers. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard
10、does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theEN title page, pages2 to4 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This
11、will be indicated in the amendment table on the inside front cover. 1) In preparation.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61305-1 July 1995 ICS 33.160.00 Descriptors: Electroacoustic equipment, high-fidelity systems, characteristics, measurements, testing conditions English version
12、Household high-fidelity audio equipment and systems Methods of measuring and specifying the performance Part1: General (IEC 1305-1:1995) Equipements et systmes audio grand public haute fidlit Methodespourmesureretspcifier les performances Partie 1: Gnralits (CEI 1305-1:1995) Hifi-Gerte und -Anlagen
13、fr den Heimgebrauch Verfahren zur Messung und Angabe der Leistungskennwerte Teil 1: Allgemeines (IEC 1305-1:1995) This European Standard was approved by CENELEC on1995-07-04. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
14、European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions
15、(English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Aust
16、ria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komi
17、tee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1995 Copyright reserved to CENELEC members Ref. No. EN61305-1:1995EEN61305-1:1995 BSI 10-1999 2 Foreword The text of document84/396/DIS, future edition1 of IEC1305-1, prepared by IECTC84, Equipment and systems
18、in the field of audio, video and audiovisual engineering, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN61305-1 on1995-07-04. The following dates were fixed: Contents Page Foreword 2 1 Scope 3 2 Conditions for measurement 3 3 Published specifications 3 4 Modes of op
19、eration 3 Annex A (informative) Bibliography 4 latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 1996-04-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 1996-0
20、4-01EN61305-1:1995 BSI 10-1999 3 1 Scope This part of IEC1305 applies exclusively to household high fidelity audio equipment and systems, and specifies general assumptions to be used to determine the characteristics of the equipment or system for specification purposes. Where possible, the methods o
21、f measurement are specified by reference to other IEC standards. 2 Conditions for measurement 2.1 The electrical conditions for measurement shall be those specified in the standard in which the method of measurement is described. 2.2 The climatic conditions for measurement shall be within the follow
22、ing ranges. NOTEFor further information on climatic conditions in general, see IEC68-1, IEC721 and IEC Guide106 (Annex A). 3 Published specifications A comprehensive specification shall be available to prospective users before purchase of the equipment. It shall contain all the information specified
23、 in clause4 of each relevant part of this standard. Abbreviated specifications may be published in addition to the comprehensive specification. The published values of all the characteristics mentioned in the parts of this standard shall be measured by the methods specified in these parts. 4 Modes o
24、f operation If a piece of equipment or a system has more than one mode of operation, the comprehensive specification shall include relevant information on the characteristics of the equipment in all modes. Ambient temperature: 15 C to35 C Relative humidity: 45%to75% Atmospheric pressure: 86kPato106k
25、PaEN61305-1:1995 4 BSI 10-1999 Annex A (informative) Bibliography IEC 68-1:1988, Environmental testing Part1:General and guidance. IEC 721, Classification of environmental conditions. IEC Guide 106:1989, Guide for specifying environmental conditions for equipment performance rating.blankBS EN 61305-
26、1:1995 IEC 1305-1: 1995 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisio
27、ns BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambigui
28、ty while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automati
29、cally receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI impl
30、ementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic in
31、formation services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards
32、. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the
33、 Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementin
34、g the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.
