1、BSI Standards PublicationFibre optic interconnectingdevices and passive components Performance standardPart 059-2: Single-mode fibre plug-receptacle style optical limiter for category C Controlled environmentBS EN 61753-059-2:2013National forewordThis British Standard is the UK implementation of EN
2、61753-059-2:2013. It is identical to IEC 61753-059-2:2013.The UK participation in its preparation was entrusted by Technical Committee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre optic interconnecting devices and passive components.A list of organizations represented on this committee can
3、be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2013.Published by BSI Standards Limited 2013 ISBN 978 0 580 71346 0 ICS 33.180.20Compl
4、iance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2013.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61753-059-2:2013EUR
5、OPEAN STANDARD EN 61753-059-2 NORME EUROPENNE EUROPISCHE NORM June 2013 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC
6、 - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61753-059-2:2013 E ICS 33.180.20 English version Fibre optic interconnecting devices and passive components - Performance standard - Part 059-2: Single-mode fibre plug-receptacle style opti
7、cal limiter for category C - Controlled environment (IEC 61753-059-2:2013) Dispositifs dinterconnexion et composants passifs fibres optiques - Norme de performance - Partie 059-2: Limiteur optique de type fiche-embase pour fibre unimodale pour catgorie C - Environnement contrl (CEI 61753-059-2:2013)
8、 Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 059-2: Einmoden-LWL-Leistungsbegrenzer Bauform Stecker-Buchse-Buchse- Buchse fr die Kategorie C - Kontrollierte Umgebung (IEC 61753-059-2:2013) This European Standard was approved by CENELEC on 2013-04-24. CENEL
9、EC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on ap
10、plication to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-
11、CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary,
12、 Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61753-059-2:2013EN 61753-059-2:2013 - 2 - Foreword The text of document 86B/3553/FDIS, future editi
13、on 1 of IEC 61753-059-2, prepared by SC 86B, “Fibre optic interconnecting devices and passive components“, of IEC TC 86, “Fibre optic“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-059-2:2013. The following dates are fixed: latest date by which the document has t
14、o be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-01-24 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-04-24 Attention is drawn to the possibility that some of the elements of th
15、is document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61753-059-2:2013 was approved by CENELEC as a European Standard without any modification. BS
16、EN 61753-059-2:2013- 3 - EN 61753-059-2:2013 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For
17、 dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Y
18、ear Title EN/HD Year IEC 60793-2-50 - Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres EN 60793-2-50 - IEC 60869-1 - Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic spe
19、cification EN 60869-1 - IEC 61300 Series Fibre optic interconnecting devices and passive components - Basic test and measurement procedures EN 61300 Series IEC 61300-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance
20、EN 61300-1 - IEC 61300-2-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-1 - IEC 61300-2-2 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures
21、 - Part 2-2: Tests - Mating durability EN 61300-2-2 - IEC 61300-2-6 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism EN 61300-2-6 - IEC 61300-2-9 - Fibre optic interconnecting devices and p
22、assive components - Basic test and measurement procedures - Part 2-9: Tests - Shock EN 61300-2-9 - IEC 61300-2-14 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optical power EN 61300-2-14 - IEC 61300-2-17 - Fibre optic
23、interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold EN 61300-2-17 - BS EN 61753-059-2:2013EN 61753-059-2:2013 - 4 - Publication Year Title EN/HD Year IEC 61300-2-18 - Fibre optic interconnecting devices and passive components - Basic test
24、and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance EN 61300-2-18 - IEC 61300-2-19 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) EN 61300-2-19 - IEC 61300-2-22 - Fib
25、re optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature EN 61300-2-22 - IEC 61300-3-2 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examinations and m
26、easurements - Polarization dependent loss in a single-mode fibre optic device EN 61300-3-2 - IEC 61300-3-3 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and
27、return loss EN 61300-3-3 - IEC 61300-3-4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation EN 61300-3-4 - IEC 61300-3-6 - Fibre optic interconnecting devices and passive components - Basic test
28、 and measurement procedures - Part 3-6: Examinations and measurements - Return loss EN 61300-3-6 - IEC 61300-3-7 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and r
29、eturn loss of single mode components EN 61300-3-7 - IEC 61300-3-28 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss EN 61300-3-28 - IEC 61300-3-32 - Fibre optic interconnecting devices and
30、 passive components - Basic test and measurement procedures - Part 3-32: Examinations and measurements - Polarisation mode dispersion measurement for passive optical components EN 61300-3-32 - IEC 61754 Series Fibre optic connector interfaces EN 61754 Series IEC 61755 Series Fibre optic connector op
31、tical interfaces EN 61755 Series BS EN 61753-059-2:2013- 5 - EN 61753-059-2:2013 Publication Year Title EN/HD Year IEC/TR 62627-02 2010 Fibre optic interconnecting devices and passive components - Part 02: Report of round robin test results on SC plug style fixed attenuators - - BS EN 61753-059-2:20
32、13 2 61753-059-2 IEC:2013 CONTENTS INTRODUCTION . 5 1 Scope . 6 2 Normative references . 6 3 Tests 7 4 Test reports 8 5 Performance requirements . 8 5.1 Sample size and sequencing . 8 5.2 Dimensions . 8 5.3 Test details and requirements . 8 Annex A (normative) Sample size and product sourcing requir
33、ements . 15 Annex B (normative) Reference connector and adaptor . 16 Annex C (normative) Plimitdefinition . 17 Annex D (normative) Response time definition . 18 Annex E (normative) Maximum allowed power inputs for optical limiters, single-mode . 19 Annex F (informative) Example of style configuratio
34、n for optical limiters 20 Annex G (normative) Testing of optical power limiters 21 Bibliography 23 Figure C.1 Measurements of Poutas a function of Pin. 17 Figure D.1 Definition of response time . 18 Figure F.1 Optical limiter, plug-receptacle style configuration 20 Figure G.1 PlimitTest set-up schem
35、atics . 21 Figure G.2 Response time testing set-up . 22 Table 1 Performance requirements for optical limiters (1 of 6) 9 Table A.1 Sample size and product sourcing requirements 15 Table B.1 Requirements for reference connector and adaptora16 Table E.1 Maximum allowed power input for optical limiters
36、, single-mode 19 BS EN 61753-059-2:201361753-059-2 IEC:2013 5 INTRODUCTION 1) The International Electrotechnical Commission (IEC) draws attention to the fact that it is claimed that compliance with this document may involve the use of a patent concerning power limiters, registered as follows: Countr
37、y Patent number Israel 147554 European Union EP 1467239 A2 USA USP110/398859 Japan 4587695 Canada 24649043 IEC takes no position concerning the evidence, validity and scope of this patent right. The holder of this patent right has assured the IEC that he/she is willing to negotiate licences under re
38、asonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with IEC. Information may be obtained from: IEC takes no position concerning the evidence, validity and scope of this patent righ
39、t. The holder of this patent right has assured the IEC that he/she is willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with IEC. Information
40、 may be obtained from: KiloLambda technologies, Ltd. 22a Wallenberg street, Tel-Aviv 69719, Israel Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. IEC shall not be held responsible for identifying
41、 any or all such patent rights. ISO (www.iso.org/patents) and IEC (http:/patents.iec.ch) maintain on-line data bases of patents relevant to their standards. Users are encouraged to consult these data bases for the most up to date information concerning patents. 2) The optical power limiter is a pass
42、ive device that regulates the optical power in fibres, producing a controlled, constant output power Plimit, as a result of varying input power higher than Plimit, and has no influence at powers below Plimit. Under normal operation, when the input power is low, the optical power limiter has no effec
43、t on the system. However, when the input power is high, the optical output power is limited to a predetermined level (Plimit).The optical limiter is wavelength independent over its entire specified spectral range. IEC 60869-1contains the generic information of the optical power limiter. The optical
44、power limiter is used at the input of power-sensitive equipment and at the output of high power devices, such as amplifiers, or wherever power regulation is required. The optical power limiter can serve as an eye safety device. The optical power limiter has a maximum allowed power input Pinmax. Abov
45、e this power it is dysfunctional and can let light through. Numerical values for Pin max are given in Annex E. BS EN 61753-059-2:2013 6 61753-059-2 IEC:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD Part 059-2: Single-mode fibre plug-receptacle style optical lim
46、iter for category C Controlled environment 1 Scope This part of IEC 61753 contains the minimum initial test and measurement requirements and severities which an optical power limiter needs to satisfy in order to be categorized as meeting the requirements of single mode fibre plug-receptable style op
47、tical limiter used in controlled environments. IEC 60869-1, contains the generic specification of the optical limiter. Optical performances specified in this standard relate to plug-receptacle style configurations optical power limiters only. 2 Normative references The following documents, in whole
48、or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60793-2-50, Optical fibres Part 2-50:
49、 Product specifications Sectional specification for class B single-mode fibres IEC 60869-1, Fibre optic interconnecting devices and passive components Fibre optic passive power control devices Part 1: Generic specification IEC 61300 (all parts), Fibre optic interconnecting devices and passive components Basic test and measurement procedures IEC 61300-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 1: General and guidance IEC 61300-2-1, Fibre opti
