1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsWB9423_BSI_StandardColCov_noK_AW:BSI FRONT COVERS 5/9/08 12:55 Page 1Digital addressable lighting interface Part 201: Particular requirements for control gear Fluorescent lamps (devi
2、ce type 0)BS EN 62386-201:2009National forewordThis British Standard is the UK implementation of EN 62386-201:2009. It isidentical to IEC 62386-201:2009. Together with BS EN 62386-101:2009 andBS EN 62386-102:2009, it partially supersedes BS EN 60929:2006 whichremains current.The UK participation in
3、its preparation was entrusted by Technical CommitteeCPL/34, Lamps and related equipment, to Subcommittee CPL/34/3, Auxiliariesfor lamps.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary prov
4、isions of acontract. Users are responsible for its correct application. BSI 2009ISBN 978 0 580 57536 5ICS 29.140.50; 29.140.99Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Co
5、mmittee on 31 October 2009Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 62386-201:2009EUROPEAN STANDARD EN 62386-201 NORME EUROPENNE EUROPISCHE NORM August 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electr
6、otechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62386-201:2009 E ICS 29.140.50; 29.140.99 Partially supersed
7、es EN 60929:2006English version Digital addressable lighting interface - Part 201: Particular requirements for control gear - Fluorescent lamps (device type 0) (IEC 62386-201:2009) Interface dclairage adressable numrique - Partie 201: Exigences particulires pour les appareillages de commande - Lampe
8、s fluorescentes (dispositifs de type 0) (CEI 62386-201:2009) Digital adressierbare Schnittstelle fr die Beleuchtung - Teil 201: Besondere Anforderungen an Betriebsgerte - Leuchtstofflampen (Gertetyp 0) (IEC 62386-201:2009) This European Standard was approved by CENELEC on 2009-07-01. CENELEC members
9、 are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application
10、to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has
11、the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherland
12、s, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 62386-201:2009EN 62386-201:2009 - 2 - Foreword The text of document 34C/784/CDV, future edition 1 of IEC 62386-201, prepared by SC 34C, Auxiliaries for lamps, of IEC TC 34, Lamps and re
13、lated equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62386-201 on 2009-07-01. EN 62386-201:2009, together with EN 62386-101 and EN 62386-102, replaces Clause E.4 “Control by digital signals” and Annex G “Test procedures for ballasts with digital control i
14、nterface according to Clause E.4” of EN 60929:2006. This Part 201 is intended to be used in conjunction with EN 62386-101 and EN 62386-102, which contain general requirements for the relevant product type (control gear or control devices). The following dates were fixed: latest date by which the EN
15、has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-04-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2012-07-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of t
16、he International Standard IEC 62386-201:2009 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60598-1 NOTE Harmonized as EN 60598-1:2008 (modified). IEC 60669-2-1
17、NOTE Harmonized as EN 60669-2-1:2004 (modified). IEC 60921 NOTE Harmonized as EN 60921:2004 (not modified). IEC 60923 NOTE Harmonized as EN 60923:2005 (not modified). IEC 60925 NOTE Harmonized as EN 60925:1991 (not modified). IEC 60929 NOTE Harmonized as EN 60929:2006 (not modified). IEC 61347-1 NOT
18、E Harmonized as EN 61347-1:2007 (modified). IEC 61347-2-3 NOTE Harmonized as EN 61347-2-3:2001 (not modified). IEC 61547 NOTE Harmonized as EN 61547:2009 (not modified). CISPR 15 NOTE Harmonized as EN 55015:2006 (not modified). _ BS EN 62386-201:2009- 3 - EN 62386-201:2009 Annex ZA (normative) Norma
19、tive references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced d
20、ocument (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 62386-101 2009 Digital addressable lighting interface - Part 101: General requirements -
21、 System EN 62386-101 2009 IEC 62386-102 2009 Digital addressable lighting interface - Part 102: General requirements - Control gearEN 62386-102 2009 BS EN 62386-201:2009 2 62386-201 IEC:2009 CONTENTS INTRODUCTION.5 1 Scope.6 2 Normative references .6 3 Terms and definitions .6 4 General 6 5 Electric
22、al specification6 6 Interface power supply .6 7 Transmission protocol structure6 8 Timing 7 9 Method of operation .7 10 Declaration of variables7 11 Definition of commands 7 12 Test procedures .8 Bibliography11 Figure 1 Test sequence “QUERY EXTENDED VERSION NUMBER“ 9 Figure 2 Test sequence “Unused a
23、pplication extended commands for device type 0“.10 Table 1 Declaration of variables.7 Table 2 Summary of the application extended command set 8 BS EN 62386-201:200962386-201 IEC:2009 5 INTRODUCTION This first edition of IEC 62386-201 is published in conjunction with IEC 62386-101 and IEC 62386-102.
24、The division of IEC 62386 into separately published parts provides for ease of future amendments and revisions. Additional requirements will be added as and when a need for them is recognized. This International Standard, and the other parts that make up the IEC 62386-200 series, in referring to any
25、 of the clauses of IEC 62386-101 or IEC 62386-102, specify the extent to which such a clause is applicable and the order in which the tests are to be performed; The parts also include additional requirements, as necessary. All parts that make up the IEC 62386-200 series are self-contained and theref
26、ore do not include references to each other. Where the requirements of any of the clauses of IEC 62386-101 or IEC 62386-102 are referred to in this International Standard by the sentence “The requirements of fluorescent lamp control gear (device type 0) shall conform to IEC 62386-1xx, Clause “n”, th
27、is sentence is to be interpreted as meaning that all requirements of the clause in question of Part 101 or Part 102 apply, except any which are inapplicable to the specific type of lamp control gear covered by Part 201. All numbers used in this International Standard are decimal numbers unless other
28、wise noted. Hexadecimal numbers are given in the format 0xVV, where VV is the value. Binary numbers are given in the format XXXXXXXXb or in the format XXXX XXXX, where X is 0 or 1; “x“ in binary numbers means “dont care“. BS EN 62386-201:2009 6 62386-201 IEC:2009 DIGITAL ADDRESSABLE LIGHTING INTERFA
29、CE Part 201: Particular requirements for control gear Fluorescent lamps (device type 0) 1 Scope This International Standard specifies a protocol and methods of test for the control by digital signals of electronic control gear for use on a.c. or d.c. supplies, associated with fluorescent lamps. 2 No
30、rmative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 62386-101:2009, Digital ad
31、dressable lighting interface Part 101: General requirements System IEC 62386-102:2009, Digital addressable lighting interface Part 102: General requirements Control gear 3 Terms and definitions For the purposes of this document, the terms and definitions given in Clause 3 of IEC 62386-101:2009 and C
32、lause 3 of IEC 62386-102:2009 apply. 4 General The requirements of Clause 4 of IEC 62386-101:2009 and Clause 4 of IEC 62386-102:2009 apply. 5 Electrical specification The requirements of Clause 5 of IEC 62386-101:2009 and Clause 5 of IEC 62386-102:2009 apply. 6 Interface power supply The requirement
33、s of Clause 6 of IEC 62386-101:2009 and Clause 6 of IEC 62386-102:2009 apply, if a power supply is integrated with the control gear. 7 Transmission protocol structure The requirements of Clause 7 of IEC 62386-101:2009 and Clause 7 of IEC 62386-102:2009 apply. BS EN 62386-201:200962386-201 IEC:2009 7
34、 8 Timing The requirements of Clause 8 of IEC 62386-101:2009 and Clause 8 of IEC 62386-102 apply. 9 Method of operation The requirements of Clause 9 of IEC 62386-101:2009 and Clause 9 of IEC 62386-102:2009 apply. 10 Declaration of variables The requirements of Clause 10 of IEC 62386-101:2009 and Cla
35、use 10 of IEC 62386-102:2009 apply, with the following additional variables for this device type, as indicated in Table 1. Table 1 Declaration of variables Variable Default value Reset value Range of validity Memory a“EXTENDED VERSION NUMBER“ 1 No change 0 255 1 byte ROM “DEVICE TYPE“ 0 No change 0
36、254, 255 (mask) 1 byte ROM aPersistent memory (storage time indefinite) if not stated otherwise. 11 Definition of commands The requirements of Clause 11 of IEC 62386-101:2009 and Clause 11 of IEC 62386-102:2009 shall apply, with the following exceptions: Amendment of Clause 11 of IEC 62386-102:2009:
37、 11.3.1 Queries related to status information Amendment: Command 153: YAAA AAA1 1001 1001 “QUERY DEVICE TYPE“ The answer shall be 0. 11.3.4 Application extended commands Replacement: Application extended commands shall be preceded by command 272, “ENABLE DEVICE TYPE 0“. For device types other than 0
38、, these commands may be used in a different way. A fluorescent lamp control gear shall not react to application extended commands preceded by command 272 “ENABLE DEVICE TYPE X“ with X 0. Commands 224 239: YAAA AAA1 1110 XXXX Reserved for future needs. The fluorescent lamp control gear shall not reac
39、t in any way. BS EN 62386-201:2009 8 62386-201 IEC:2009 Commands 240 247: YAAA AAA1 1111 0XXX Reserved for future needs. The fluorescent lamp control gear shall not react in any way. Commands 248 251: YAAA AAA1 1111 10XX Reserved for future needs. The fluorescent lamp control gear shall not react in
40、 any way. Commands 252 253: YAAA AAA1 1111 110X Reserved for future needs. The fluorescent lamp control gear shall not react in any way. Command 254: YAAA AAA1 1111 1110 Reserved for future needs. The fluorescent lamp control gear shall not react in any way. Command 255: YAAA AAA1 1111 1111 “QUERY E
41、XTENDED VERSION NUMBER“ The answer shall be 1. 11.4.4 Extended special commands Amendment: Command 272: 1100 0001 0000 0000 “ENABLE DEVICE TYPE 0“ The device type for fluorescent lamp control gear is 0. 11.5 Summary of the command set The commands listed in 11.5 of IEC 62386-101:2009 and 11.5 of IEC
42、 62386-102:2009 apply with the following additional commands for device type 0 listed in Table 2. Table 2 Summary of the application extended command set Command number Command code Command name 224 239 YAAA AAA1 1110 XXXX a240 247 YAAA AAA1 1111 0XXX a248 251 YAAA AAA1 1111 10XX a252 253 YAAA AAA1
43、1111 110X a254 YAAA AAA1 1111 1110 a255 YAAA AAA1 1111 1111 QUERY EXTENDED VERSION NUMBER 272 1100 0001 0000 0000 ENABLE DEVICE TYPE 0 aReserved for future needs. The fluorescent lamp control gear shall not react in any way. 12 Test procedures The requirements of Clause 12 of IEC 62386-102:2009 appl
44、y, with the following exceptions: Additional subclause: 12.7 Test sequences for “Application extended commands for device type 0“ 12.7.1 Test sequences for standard application extended commands 12.7.1.1 Test sequence for “QUERY EXTENDED VERSION NUMBER“ Command 255, “QUERY EXTENDED VERSION NUMBER“,
45、shall be tested for all possible values of X in command 272, “ENABLE DEVICE TYPE X“. The test sequence “QUERY EXTENDED VERSION NUMBER“ is shown in Figure 1. BS EN 62386-201:200962386-201 IEC:2009 9 NOTE A fluorescent lamp control gear supporting more than one device type will also answer to the quer
46、y for X not equal to 0. Test QUERY EXTENDED VERSION NUMBERSEND TWICEBROADCASTRESETWait(300 ms + Response time)Testdonei := 0iMAX := 254Any reply ?Message:“EXTENDED VERSION NUMBER is for device type “ YesError 7611“No answer to QUERY EXTENDED VERSION NUMBER“ i := i + 1i iMAX?Test command using broadc
47、ast addressYesReset DUTNext device typeNoSEND TO DEVICE TYPEBROADCASTQUERY EXTENDED VERSION NUMBERiNoLast device typeInitialise counter for device typei = 0 ? YesNoFigure 1 Test sequence “QUERY EXTENDED VERSION NUMBER“ IEC 086/08 BS EN 62386-201:2009 10 62386-201 IEC:2009 12.7.1.2 Test sequence for
48、“Unused application extended commands for device type 0“ A fluorescent lamp control gear of DEVICE TYPE = 0 shall not react on the commands 224 to 254. The sequence “Unused application extended commands for device type 0“ is shown in Figure 2. YesTestUNUSED APPLICATION EXTENDED COMMANDSSEND TWICEBRO
49、ADCASTRESETSet the DUT in reset stateWait(300 ms + Response time)Error 7621,k“Answer after receiving APPLICATION EXTENDED COMMAND “Any reply ?NoYesTestdoneYesError 7622,k“DUT not in reset state after receiving APPLICATION EXTENDED COMMAND “Answer = Yes ?SEND BROADCASTQUERY RESET STATENok := 0kmax := 30:= (224 + k)SEND TWICEBROADCASTRESETWait(300 ms + Response time+ Preheat time)Initialise counter for commandsCalculate Command ByteSend
