1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Part 4: Elementary quality requirementsThe European Standard EN ISO 3834-4:2005 has the status of a
2、 British StandardICS 25.160.01Quality requirements for fusion welding of metallic materials BRITISH STANDARDBS EN ISO 3834-4:2005BS EN ISO 3834-4:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 23 January 2006 BSI 23 January 2006ISBN 0 58
3、0 47621 9Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Cata
4、logue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations.Summary of pagesThis document
5、comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii to iv, pages 1 to 3 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. N
6、o. Date CommentsA list of organizations represented on this committee can be obtained on request to its secretary. present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international a
7、nd European developments and promulgate them in the UK.National forewordThis British Standard is the official English language version of EN ISO 3834-4:2005. It is identical with ISO 3834-4:2005. It supersedes BS EN 729-4:1995 which is withdrawn.The UK participation in its preparation was entrusted
8、to Technical Committee WEE/-/1, Briefing committee for welding, which has the responsibility to: aid enquirers to understand the text;EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 3834-4 December 2005 ICS 25.160.01 Supersedes EN 729-4:1994English Version Quality requirements for fusion we
9、lding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2005) Exigences de qualit en soudage par fusion des matriaux mtalliques - Partie 4: Exigences de qualit lmentaire (ISO 3834-4:2005) Qualittsanforderungen fr das Schmelzschweien von metallischen Werkstoffen - Teil 4: El
10、ementare Qualittsanforderungen (ISO 3834-4:2005) This European Standard was approved by CEN on 28 October 2005. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alt
11、eration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by tran
12、slation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
13、Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: ru
14、e de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 3834-4:2005: EForeword This document (EN ISO 3834-4:2005) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes“
15、in collaboration with Technical Committee CEN/TC 121 “Welding“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2006, and conflicting national standar
16、ds shall be withdrawn at the latest by June 2006. This document supersedes EN 729-4:1994. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmar
17、k, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 3834-4:2005 has been approved by CEN as E
18、N ISO 3834-4:2005 without any modifications. EN ISO 3834-4:2005Reference numberISO 3834-4:2005(E)INTERNATIONAL STANDARD ISO3834-4Second edition2005-12-15Quality requirements for fusion welding of metallic materials Part 4: Elementary quality requirements Exigences de qualit en soudage par fusion des
19、 matriaux mtalliques Partie 4: Exigences de qualit lmentaire EN ISO 3834-4:2005ii iiiContents Page Foreword iv 1 Scope . 1 2 Normative references . 1 3 Terms and definitions. 1 4 Use of this part of ISO 3834 . 1 5 Review of requirements and technical review.1 6 Sub-contracting 2 7 Welding personnel
20、2 8 Inspection and testing personnel . 2 9 Equipment . 2 10 Welding and related activities . 3 11 Welding consumables 3 12 Inspection and testing 3 13 Non-conformance and corrective actions 3 14 Quality records 3 EN ISO 3834-4:2005iv Foreword ISO (the International Organization for Standardization)
21、is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be repres
22、ented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are
23、drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International
24、 Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 3834-4 was prep
25、ared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee SC 10, Unification of requirements in the field of metal welding. This second edition cancels and replaces the first edition (ISO 3834-4:1984), which has been technically revised. ISO 3834 consists of the following par
26、ts, under the general title Quality requirements for fusion welding of metallic materials: Part 1: Criteria for the selection of the appropriate level of quality requirements Part 2: Comprehensive quality requirements Part 3: Standard quality requirements Part 4: Elementary quality requirements Part
27、 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 NOTE A Technical Report ISO/TR 3834-6, Quality requirements for fusion welding of metallic materials Part 6: Guidance on implementing ISO 3834 is being prepared
28、. Requests for official interpretations of any aspect of this part of ISO 3834 should be directed to the Secretariat of ISO/TC 44/SC 10 via your national standards body, a complete listing which can be found at http:/www.iso.org. EN ISO 3834-4:20051Quality requirements for fusion welding of metallic
29、 materials Part 4: Elementary quality requirements 1 Scope This part of ISO 3834 defines elementary quality requirements for fusion welding of metallic materials both in workshops and at field installation sites. 2 Normative references The following referenced documents are indispensable for the app
30、lication of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 3834-1, Quality requirements for fusion welding of metallic materials Part 1: Guidelines for the selection of
31、 the appropriate level of quality requirements ISO 3834-5:2005, Quality requirements for fusion welding of metallic materials Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 3 Terms and definitions For th
32、e purposes of this document, the terms and definitions given in ISO 3834-1 apply. 4 Use of this part of ISO 3834 For general information on the use of this part of ISO 3834, ISO 3834-1 shall be used. In order to fulfil the quality requirements given in this part of ISO 3834, the conformity to releva
33、nt documents given in ISO 3834-5 shall be verified. The requirements contained within this part of ISO 3834 shall be adopted in full. 5 Review of requirements and technical review The manufacturer shall review the contractual requirements and any other requirements, together with any technical data
34、provided by the purchaser or in-house data when the construction is designed by the manufacturer. The manufacturer shall establish that all information necessary to carry out the manufacturing operations is complete and available prior to the commencement of the work. The manufacturer shall affirm i
35、ts capability to meet all requirements and shall ensure adequate planning of all quality-related activities. EN ISO 3834-4:20052 The review of requirements is carried out by the manufacturer to verify that the work content is within its capability to perform, that sufficient resources are available
36、to achieve delivery schedules and that documentation is clear and unambiguous. The manufacturer shall ensure that any variations between the contract and any previous quotation are identified and the purchaser notified of any programme, cost or engineering changes that may result. 6 Sub-contracting
37、When a manufacturer intends to use sub-contracted services or activities (e.g. welding, inspection, non-destructive testing), information necessary to meet applicable requirements shall be supplied by the manufacturer to the sub-contractor. The sub-contractor shall provide such records and documenta
38、tion of his work as may be specified by the manufacturer. A sub-contractor shall work under the order and responsibility of the manufacturer and shall fully comply with the relevant requirements of this part of ISO 3834. The manufacturer shall ensure that the sub-contractor can comply with the quali
39、ty requirements as specified. 7 Welding personnel 7.1 General The manufacturer shall provide sufficient supervision of the welding production in order to assure that the welding is carried out in a manner compatible with good workmanship. 7.2 Welders and welding operators Welders and welding operato
40、rs shall be qualified by an appropriate test. The ISO documents to which it is required to conform to fulfil the quality requirements are specified in ISO 3834-5:2005, Table 1, for arc welding, electron beam welding, laser beam welding and gas welding, and in ISO 3834-5:2005, Table 10, for other fus
41、ion welding processes. 8 Inspection and testing personnel 8.1 General The manufacturer shall carry out all inspection and testing as specified. 8.2 Non-destructive testing personnel The non-destructive testing personnel shall be qualified. For visual testing, a qualification test may not be required
42、. When a qualification test is not required, competence shall be verified by the manufacturer. The ISO documents to which it is required to conform to fulfil the quality requirements are specified in ISO 3834-5:2005, Table 3, for arc welding, electron beam welding, laser beam welding and gas welding
43、, and in ISO 3834-5:2005, Table 10, for other fusion welding processes. 9 Equipment Welding equipment shall be available and maintained in proper working order. EN ISO 3834-4:2005310 Welding and related activities Welding shall be performed in accordance with an appropriate welding technique. 11 Wel
44、ding consumables The manufacturer shall ensure that appropriate welding consumables are stored and used in accordance with the suppliers recommendations. 12 Inspection and testing The manufacturer shall carry out all inspection and testing as specified. 13 Non-conformance and corrective actions Meas
45、ures shall be implemented to control items or activities which do not conform to specified requirements in order to prevent their inadvertent acceptance. Measures shall also be implemented to ensure that conditions adverse to quality of the welded construction are promptly identified and corrected.
46、14 Quality records Quality records shall be retained for a minimum period of five years in the absence of any other specified requirements. EN ISO 3834-4:2005BS EN ISO BSI389 Chiswick High RoadLondonW4 4AL3834-4:2005BSI British Standards InstitutionBSI is the independent national body responsible fo
47、r preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or ed
48、itions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the i
49、nside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-global.co
