1、Energy performance of buildings Sensible and latent heat loads and internal temperaturesPart 1: Generic calculation proceduresBS EN ISO 520171:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 52017-1 July 20
2、17 ICS 91.120.10 Supersedes EN 15255:2007, EN 15265:2007, EN ISO 13791:2012, EN ISO 13792:2012English Version Energy performance of buildings - Sensible and latent heat loads and internal temperatures - Part 1: Generic calculation procedures (ISO 52017-1:2017) Performance nergtique des btiments - Ch
3、arges thermiques latentes et sensibles et tempratures intrieures - Partie 1: Mthodes de calcul gnriques (ISO 52017-1:2017) Energieeffiziens von Gebuden - Fhlbare und latente Wrmelasten und Innentemperaturen - Teil 1: Allgemeine Berechnungsverfahren (ISO 52017-1:2017)This European Standard was approv
4、ed by CEN on 27 February 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
5、 standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language
6、and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hun
7、gary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG
8、 CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 52017-1:2017 ENational forewordThis British Standard is the UK implementation of EN ISO 520171:2017. Togethe
9、r with BS EN ISO 520161:2017, it supersedes BS EN 15265:2007, BS EN 15255:2007, BS EN ISO 13791:2012 and BS EN ISO 13792:2012, which are withdrawn.The UK participation in its preparation was entrusted to Technical Committee B/540/2, Building performance Moisture.A list of organizations represented o
10、n this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 87108
11、5ICS 91.120.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 3O September 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDB
12、S EN ISO 520171:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 52017-1 July 2017 ICS 91.120.10 Supersedes EN 15255:2007, EN 15265:2007, EN ISO 13791:2012, EN ISO 13792:2012English Version Energy performance of buildings - Sensible and latent heat loads and internal temperatures - Part
13、1: Generic calculation procedures (ISO 52017-1:2017) Performance nergtique des btiments - Charges thermiques latentes et sensibles et tempratures intrieures - Partie 1: Mthodes de calcul gnriques (ISO 52017-1:2017) Energieeffiziens von Gebuden - Fhlbare und latente Wrmelasten und Innentemperaturen -
14、 Teil 1: Allgemeine Berechnungsverfahren (ISO 52017-1:2017)This European Standard was approved by CEN on 27 February 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard with
15、out any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other
16、language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, De
17、nmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN
18、 COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 52017-1:2017 EBS
19、 EN ISO 520171:2017EN ISO 52017-1:2017 (E) 3 European foreword This document (EN ISO 52017-1:2017) has been prepared by Technical Committee ISO/TC 163 “Thermal performance and energy use in the built environment“ in collaboration with Technical Committee CEN/TC 89 “Thermal performance of buildings a
20、nd building components” the secretariat of which is held by SIS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2018, and conflicting national standards shall be withdrawn at the latest b
21、y January 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commissi
22、on and the European Free Trade Association. This document is part of the set of standards on the energy performance of buildings (the set of EPB standards) and has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association (Mandate M/480, see refere
23、nce EF1 below), and supports essential requirements of EU Directive 2010/31/EC on the energy performance of buildings (EPBD, EF2). In case this standard is used in the context of national or regional legal requirements, mandatory choices may be given at national or regional level for such specific a
24、pplications, in particular for the application within the context of EU Directives transposed into national legal requirements. Further target groups are users of the voluntary common European Union certification scheme for the energy performance of non-residential buildings (EPBD art.11.9) and any
25、other regional (e.g. Pan European) parties wanting to motivate their assumptions by classifying the building energy performance for a dedicated building stock. References: EF1 Mandate M/480, Mandate to CEN, CENELEC and ETSI for the elaboration and adoption of standards for a methodology calculating
26、the integrated energy performance of buildings and promoting the energy efficiency of buildings, in accordance with the terms set in the recast of the Directive on the energy performance of buildings (2010/31/EU) of 14th December 2010 EF2 EPBD, Recast of the Directive on the energy performance of bu
27、ildings (2010/31/EU) of 14thDecember 2010 EF3 EN 15265:2007, Energy performance of buildings Calculation of energy needs for space heating and cooling using dynamic methods General criteria and validation procedures EF4 EN 15255:2007, Thermal performance of buildings Sensible room cooling load calcu
28、lation - General criteria and validation procedures Together with EN ISO 52016-1 this document supersedes EN ISO 13791:2012, EN ISO 13792:2012, EN 15255:2007 EF3 and EN 15265:2007 EF4. BS EN ISO 520171:2017EN ISO 52017-1:2017 (E) 4 According to the CEN-CENELEC Internal Regulations, the national stan
29、dards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, L
30、uxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 52017-1:2017 has been approved by CEN as EN ISO 52017-1:2017 without any modification. BS EN ISO 520171:2017This
31、 page deliberately left blank ISO 52017-1:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 24 Symbols and subscripts . 34.1 Symbols . 34.2 Subscripts 45 Brief description of the method . 55.1 Output of the method 55.2 General description of the method 56 C
32、alculation method 56.1 Output data 56.2 Calculation time interval and calculation period 66.3 Input data 66.4 Calculation procedure . 76.4.1 Applicable time interval 76.4.2 Assumptions 76.4.3 Calculation of relevant temperatures 86.4.4 Building zone thermal balance (sensible heat) 126.4.5 Heat trans
33、fer components 136.4.6 Building zone moisture and latent heat balance .226.4.7 Calculation steps .236.4.8 Boundary conditions .247 Quality control .257.1 Report of the calculation . 257.2 Validation cases . 258 Compliance check .26Annex A (normative) Input and method selection data sheet Template 27
34、Annex B (informative) Input and method selection data sheet Default choices 29Bibliography .31 ISO 2017 All rights reserved iiiContents PageISO 52017-1:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 24 Symbols and subscripts . 34.1 Symbols . 34.2 Subscri
35、pts 45 Brief description of the method . 55.1 Output of the method 55.2 General description of the method 56 Calculation method 56.1 Output data 56.2 Calculation time interval and calculation period 66.3 Input data 66.4 Calculation procedure . 76.4.1 Applicable time interval 76.4.2 Assumptions 76.4.
36、3 Calculation of relevant temperatures 86.4.4 Building zone thermal balance (sensible heat) 126.4.5 Heat transfer components 136.4.6 Building zone moisture and latent heat balance .226.4.7 Calculation steps .236.4.8 Boundary conditions .247 Quality control .257.1 Report of the calculation . 257.2 Va
37、lidation cases . 258 Compliance check .26Annex A (normative) Input and method selection data sheet Template 27Annex B (informative) Input and method selection data sheet Default choices 29Bibliography .31 ISO 2017 All rights reserved iiiContents PageBS EN ISO 520171:2017ISO 52017-1:2017(E)ForewordIS
38、O (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical co
39、mmittee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electro
40、technical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was draf
41、ted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent
42、rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not c
43、onstitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT)
44、see the following URL: www .iso .org/ iso/ foreword .html.ISO 52017-1 was prepared by ISO Technical Committee ISO/TC 163, Thermal performance and energy use in the built environment, Subcommittee SC 2, Calculation methods, in collaboration with the European Committee for Standardization (CEN) Techni
45、cal Committee CEN/TC 89, Thermal performance of buildings and building components, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).This first edition of ISO 52017-1 cancels and replaces ISO 13791:2012, which has been technically revised. A list of all
46、 parts in the ISO 52017 series can be found on the ISO website.iv ISO 2017 All rights reservedBS EN ISO 520171:2017ISO 52017-1:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing Int
47、ernational Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison w
48、ith ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directive
49、s, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the deve
