1、BSI Standards PublicationBS ISO 10161-2:2014Information anddocumentation OpenSystems Interconnection Interlibrary Loan ApplicationProtocol SpecificationPart 2: Protocol implementationconformance statement (PICS) proformaBS ISO 10161-2:2014 BRITISH STANDARDNational forewordThis British Standard is th
2、e UK implementation of ISO 10161-2:2014. It supersedes BS ISO 10161-2:1997 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee IDT/2/7, Computer applications in Information and Doc-umentation.A list of organizations represented on this committee can be obt
3、ained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 86137 6ICS 35.240.30Compliance wi
4、th a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2014.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS ISO 10161-2:2014 ISO 2014Informa
5、tion and documentation Open Systems Interconnection Interlibrary Loan Application Protocol Specification Part 2: Protocol implementation conformance statement (PICS) proformaInformation et documentation Interconnexion de systmes ouverts (OSI) Spcification du protocole dapplication pour les prts entr
6、e bibliothques Partie 2: Proforma dtablissement de conformit pour la mise en oeuvre du protocole (PICS)INTERNATIONAL STANDARDISO10161-2Second edition2014-10-15Reference numberISO 10161-2:2014(E)BS ISO 10161-2:2014ISO 10161-2:2014(E)ii ISO 2014 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2014
7、All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested
8、 from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCase postale 56 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail copyrightiso.orgWeb www.iso.orgPublished in SwitzerlandBS ISO 10161-2:2014ISO 10161-2:2014(E) ISO 2014 All
9、rights reserved iiiContents PageForeword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 14 Abbreviations. 25 Layout . 26 Conformance . 27 Notations defined in the proforma 27.1 General . 27.2 “D” Column . 27.3 “I” Column . 37.4 “Reference, usage or range of values” colu
10、mn . 38 PICS Numbers. 39 Completion of the PICS . 3Annex A (normative) Protocol Implementation Conformance Statement (PICS) proforma for the Interlibrary Loan Protocol 4Bibliography .34BS ISO 10161-2:2014ISO 10161-2:2014(E)ForewordISO (the International Organization for Standardization) is a worldwi
11、de federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on tha
12、t committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this docum
13、ent and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directive
14、s, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development
15、 of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specifi
16、c terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 46, Information and do
17、cumentation, Subcommittee SC 4, Technical interoperability.This second edition cancels and replaces the first edition (ISO 10161-2:1997) of which it constitutes a minor revision.ISO 10161 consists of the following parts, under the general title Information and documentation Open Systems Interconnect
18、ion Interlibrary Loan Application Protocol Specification : Part 1: Protocol specification Part 2: Protocol implementation conformance statement (PICS) proformaiv ISO 2014 All rights reservedBS ISO 10161-2:2014ISO 10161-2:2014(E)IntroductionTo evaluate conformance of a particular implementation of an
19、 OSI protocol, it is necessary to have a description of the capabilities and options which have been implemented. Such a description is called a Protocol Implementation Conformance Statement (PICS).A PICS proforma is developed as a companion standard to an OSI protocol standard. It is developed in t
20、he form of a questionnaire to be filled out by a supplier of a product claiming to implement the protocol. The filled-out questionnaire becomes the PICS for the product. It indicates which capabilities and options have been implemented and what limitations might prevent interworking. It allows a cus
21、tomer of the product to evaluate its conformance to the standard and to determine whether the product meets the customers requirements.This part of ISO 10161 defines a protocol implementation conformance statement (PICS) proforma for the detailed expression of the conformance requirements of ISO 101
22、61-1 which incorporates Defect Reports 1-22 and Amendment 1: ILL Support for Electronic Document Delivery. Detail of the use of this proforma is provided in this part of ISO 10161.The level of detail required in the proforma exceeds that of the protocol specification by requiring details of the impl
23、ementer in addition to details of the implementation. ISO 2014 All rights reserved vBS ISO 10161-2:2014BS ISO 10161-2:2014Information and documentation Open Systems Interconnection Interlibrary Loan Application Protocol Specification Part 2: Protocol implementation conformance statement (PICS) profo
24、rma1 ScopeThis part of ISO 10161 defines the protocol implementation conformance statement (PICS) proforma for the ILL protocol as specified in ISO 10161-1, in compliance with the relevant requirements, and in accordance with the relevant guidance for a PICS proforma, given in ISO/IEC 9646-2.Impleme
25、nters claiming conformance to ISO 10161-1 complete the proforma as part of the conformance requirements.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition ci
26、ted applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO/IEC 9646-1, Information technology Open Systems Interconnection Conformance testing methodology and framework Part 1: General concepts1)ISO 10161-1:2014, Information and document
27、ation Open Systems Interconnection Interlibrary Loan Application Protocol Specification Part 1: Protocol specification3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO/IEC 9646-1 and the following apply.3.1PICS proformadocument, in the form of a questio
28、nnaire, designed by the protocol specifier or conformance test suite specifier, which when completed for an OSI implementation or system becomes the PICS3.2protocol implementation conformance statementPICSstatement made by the supplier of an OSI implementation or system stating which capabilities ha
29、ve been implemented for a given OSI protocol1) ISO/IEC 9646-1:1994 supersedes ISO/IEC 9646-1:1991. However, when this part of ISO 10161 was under development, the previous edition was valid and this part of ISO 10161 is therefore based on that edition.INTERNATIONAL STANDARD ISO 10161-2:2014(E) ISO 2
30、014 All rights reserved 1BS ISO 10161-2:2014ISO 10161-2:2014(E)4 AbbreviationsThis part of ISO 10161 uses the following abbreviations.APDU Application Protocol Data Unit ASN.1 Abstract Syntax Notation One EDIFACT Elec -tronic Data Interchange for Administration, Commerce and TransportILL Interlibrar
31、y LoanOSI Open Systems InterconnectionPICS Protocol Implementation Conformance Statement5 LayoutAnnex A contains the actual proforma to be filled in by an implementer claiming conformance to ISO 10161-1. The PICS proforma has been designed to be a self-contained section of this part of ISO 10161, fo
32、r use in testing and procurement.6 ConformanceA conforming PICS shall:a) be technically equivalent to the ISO published PICS proforma and shall preserve the numbering and ordering of the items in the ISO PICS proforma;b) include the information necessary to uniquely identify both the supplier and th
33、e implementation.A supplier shall complete this PICS proforma in accordance with the instructions for completion given in Clauses 7 and 9.7 Notations defined in the proforma7.1 GeneralIn order to reduce the size of the tables in the proforma, a number of abbreviations have been introduced. The defin
34、ition of each of these follows:For column headings:“D”: Defined in ISO 10161. This column indicates the level of support required for conformance to ISO 10161.“I”: Implementation indicator. This column shows which parameters or other details have or have not been implemented.7.2 “D” Column“m”: manda
35、tory: support for this feature is required for conformance to ISO 10161.“o”: optional: support for this feature is permitted, but is not required for conformance to ISO 10161. However, if this feature is implemented, it must conform to the specifications and restrictions contained in ISO 10161. Thes
36、e restrictions may affect the optionality of other features.“c”: conditional: support for this feature is mandatory if certain conditions as specified in ISO 10161-1 are met. The conditions to be met are indicated by an integer referencing a table of conditions at the end of each proforma section.2
37、ISO 2014 All rights reservedBS ISO 10161-2:2014ISO 10161-2:2014(E)“cc”: conditional on supporting communication service: support for this feature is mandatory if the supporting communication service is store-and-forward service; support is optional if the supporting communication service is connecti
38、on oriented.“-”: not applicable.7.3 “I” ColumnThe “I” column shall be completed by the supplier or implementer to indicate the level of implementation of each feature. The proforma has been designed such that the only entries required in the “I” column are:“Y”: Yes, the feature has been implemented“
39、N”: No. the feature has not been implemented“-”: Not applicable to this implementation7.4 “Reference, usage or range of values” columnThe “Reference, usage or range of values” column requires the specification of information pertaining to the usage or range of values implemented for a feature, where
40、 relevant and/or where the implementation has restrictions or limits not present in ISO 10161-1.If the proforma has insufficient room for a complete description of the usage or range of values for any particular feature, a reference to an attachment on a separate page may be given here.8 PICS Number
41、sEach line in the PICS proforma which requires implementation detail to be supplied is numbered at the left-hand edge of the line. This numbering is included as a means of uniquely identifying all possible implementation details within the proforma. The need for such unique referencing has been iden
42、tified by testing bodies.The means of referencing individual responses shall be to specify the smallest subclause enclosing the relevant item and the reference number of the row in which the response appears.9 Completion of the PICSThe implementer shall complete all “ ” entries in the proforma, in a
43、ddition to other specifically identified sections. In certain clauses further guidance for completion is included. Such guidance supplements the guidance given in this clause and its scope is restricted to the clause in which it appears.Other specifically identified information shall be provided by
44、the implementer where requested.No changes shall be made to the proforma except the addition of responses as required. Recognizing that the level of detail required may, in some instances, exceed the space available for responses, the implementer may continue the response on separate paper (so indic
45、ating in the space provided) and provide a reference (see Clause 8). ISO 2014 All rights reserved 3BS ISO 10161-2:2014ISO 10161-2:2014(E)Annex A (normative) Protocol Implementation Conformance Statement (PICS) proforma for the Interlibrary Loan Protocol2)Section One General informationA.1 Implementa
46、tion detailsA.1.1 Date of statement1 Date of Statement (YYYY-MM-DD):A.1.2 Identification of the implementation1 Implementation Supplier:2 Implementation Name:3 Implementation Version Number:4 Machine Name:5 Machine Version Number:6 Operating System Name:7 Operating System Version Number:8 Other Oper
47、ating Systems:9 Other Hardware:10 System Name (if different):11 Resources Required:12 Contact Name:13 Contact Address:14 Contact Telephone:A.2 Global statement of conformance1 Are all mandatory features of ISO 10161-1 implemented? 2) Copyright release for PICS proforma: Users of this part of ISO 101
48、61 may freely reproduce this PICS proforma so that it can be used for its intended purpose and may further publish the completed PICS.4 ISO 2014 All rights reservedBS ISO 10161-2:2014ISO 10161-2:2014(E)Section Two General detailsA.3 ISO 10161 details1 Protocol Version Number(s) that this PICS descri
49、bes:2 Other Version Number(s) supported:3 Defect Report Number(s) implemented:4 Amendment(s) implemented:A.4 Application-context namesList the names and object identifiers of the application-contexts recognized or provided by this implementation.Ref Application-Context Name Object IdentifierA.5 Roles supportedRef D I1 Requester o 2 Responder o 3 Intermediary o NOTE At least one role must be supported by an implementation.A.6 ILL Service types supportedRef Service Type Re
