1、Communication networks and systems for power utility automationPart 80-1: Guideline to exchanging information from a CDC-based data model using IEC 60870-5-101 or IEC 60870-5-104PD IEC/TS 61850-80-1:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewor
2、dThis Published Document is the UK implementation of IEC/TS 61850-80-1:2016. It supersedes DD CLC/TS 61850-80-1:2010 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee PEL/57, Power systems management and associated information exchange.A list of organizat
3、ions represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN
4、978 0 580 92816 1ICS 33.200Compliance with a British Standard cannot confer immunity fromlegal obligations.This Published Document was published under the authority of theStandards Policy and Strategy Committee on 31 August 2016.Amendments/corrigenda issued since publicationDate Text affectedPUBLISH
5、ED DOCUMENTPD IEC/TS 61850-80-1:2016IEC TS 61850-80-1 Edition 2.0 2016-07 TECHNICAL SPECIFICATION Communication networks and systems for power utility automation Part 80-1: Guideline to exchanging information from a CDC-based data model using IEC 60870-5-101 or IEC 60870-5-104 INTERNATIONAL ELECTROT
6、ECHNICAL COMMISSION ICS 33.200 ISBN 978-2-8322-3535-5 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. colourinsidePD IEC/TS 61850-80-1:2016 2 IEC TS 61850-80-1:2016 IEC 2016 CONTENTS FOREWORD
7、. 8 1 Scope 10 2 Normative references. 11 3 Abbreviated terms . 11 4 The mapping architecture 12 5 Conceptual architectures and associated use cases 13 5.1 Conceptual architecture of a gateway device . 13 5.1.1 General . 13 5.1.2 Use case a) for a gateway device . 14 5.1.3 Use case b) for a gateway
8、device . 15 5.1.4 Use case c) for a gateway device . 16 5.2 Conceptual architecture of an IED directly connected to a WAN (optional) 17 6 Mapping of a device-oriented information model to IEC 60870-5-104 or IEC 60870-5-101 . 18 6.1 General . 18 6.2 Mapping of a device-oriented information model refe
9、rence . 18 6.3 Logical device class mapping 19 6.4 Logical node class mapping . 19 7 Mapping of the common data classes (CDC) 19 7.1 List of CDC, type Identifications and corresponding mappings for IEC 61850 19 7.2 CDC single point status (SPS) . 23 7.3 CDC double point status (DPS) . 23 7.4 CDC int
10、eger status (INS) . 24 7.5 CDC protection activated information (ACT) . 27 7.6 CDC directional protection activation information (ACD) . 29 7.7 CDC Security violation counting (SEC) 32 7.8 CDC binary counter reading (BCR) 33 7.9 CDC measured value (MV) 34 7.10 CDC complex measured value (CMV) 36 7.1
11、1 CDC Phase to ground related measured values of a three-phase system (WYE) . 38 7.12 CDC phase to phase measured values of a three phase system (DEL) . 39 7.13 CDC sequence (SEQ) . 40 7.14 CDC harmonic value (HMV) . 41 7.14.1 CDC HMV defined in IEC 61850-7-3:2003 41 7.14.2 CDC HMV defined in IEC 61
12、850-7-3:2010 42 7.15 CDC harmonic value for WYE (HWYE) 42 7.15.1 CDC WYE (HWYE) defined in IEC 61850-7-3:2003 . 42 7.15.2 CDC WYE (HWYE) defined in IEC 61850-7-3:2010 . 43 7.16 CDC harmonic value for DEL (HDEL) . 44 7.16.1 CDC DEL (HDEL) defined in IEC 61850-7-3:2003 . 44 7.16.2 CDC DEL (HDEL) defin
13、ed in IEC 61850-7-3:2010 . 44 7.17 CDC controllable single point (SPC) 45 7.18 CDC controllable double point (DPC) . 47 7.19 CDC controllable integer status (INC) 48 7.20 CDC binary controlled step position information (BSC) . 50 PD IEC/TS 61850-80-1:2016IEC TS 61850-80-1:2016 IEC 2016 3 7.21 CDC in
14、teger-controlled step position information (ISC) . 53 7.22 CDC controllable analogue set point information (APC) 55 7.22.1 CDC APC defined in IEC 61850-7-3:2003 . 55 7.22.2 CDC APC defined in IEC 61850-7-3:2010 . 56 7.23 CDC Single point setting (SPG) . 59 7.24 CDC integer status setting (ING) . 60
15、7.25 CDC analogue settings (ASG) . 61 7.26 CDC enumerated status (ENS) 61 7.27 CDC Histogramm (HST) 63 7.28 CDC controllable enumerated status (ENC) . 64 7.29 CDC Enumerated status setting (ENG) 68 7.30 CDC Binary controlled analog process value (BAC) . 68 7.31 CDC Curve shape setting (CSG) 69 8 Map
16、ping of services . 70 8.1 List of service models and corresponding mappings . 70 8.2 Server class mapping 72 8.3 Association class mapping 73 8.4 Logical node class mapping . 73 8.5 Data class mapping . 74 8.6 Setting group class mapping 75 8.7 Report control block class mapping . 76 8.8 Control cla
17、ss mapping . 77 8.8.1 General . 77 8.8.2 Direct control with normal security (optional) . 79 8.8.3 Direct control with enhanced security . 86 8.8.4 SBO control with enhanced security . 91 9 Protocol stack selections for IEC 60870-5-101 and IEC 60870-5-104 100 9.1 General . 100 9.2 Structure of appli
18、cation data 100 9.2.1 General . 100 9.2.2 Structure of application data defined in IEC 60870-5-101 101 9.2.3 Structure of application data defined in IEC 60870-5-104 101 9.3 IEC 60870-5 interoperability 102 9.3.1 IEC 60870-5-101 interoperability 102 9.3.2 IEC 60870-5-104 interoperability 112 Annex A
19、 (informative) Use of SCL (substation configuration language) to include IEC 60870-5-101 or IEC 60870-5-104 information 126 A.1 SCL information model hierarchy . 126 A.1.1 General . 126 A.1.2 Mapping of the common address of ASDU 127 A.1.3 Mapping of the IOA (information object address) . 127 A.1.4
20、Mapping of the type identifiers (TI) . 127 A.2 Use of the SCL elements . 127 A.2.1 General . 127 A.2.2 IED 127 A.2.3 AccessPoint . 127 A.2.4 Server . 127 A.2.5 LDevice . 127 A.2.6 LN . 128 PD IEC/TS 61850-80-1:2016 4 IEC TS 61850-80-1:2016 IEC 2016 A.2.7 DOI 128 A.2.8 SDI 128 A.2.9 DAI 128 A.2.10 DA
21、/BDA/SDO . 128 A.2.11 Control model 129 A.3 IEC 60870-5-101 or IEC 60870-5-104 private section syntax 129 A.3.1 General . 129 A.3.2 IEC 60870-5-101 private section schema 129 A.3.3 IEC 60870-5-104 Private section schema . 130 A.3.4 Use of Private section examples . 131 A.4 IEC 60870-5-101 communicat
22、ion parameters configuration using SCL 167 A.5 IEC 60870-5-104 communication parameters configuration using SCL 169 Bibliography . 173 Figure 1 Conceptual architecture of a gateway device . 13 Figure 2 Use case a) for a gateway device . 14 Figure 3 Use case b) for a gateway device . 15 Figure 4 Use
23、case c) for a gateway device . 16 Figure 5 Conceptual architecture of an IED 17 Figure 6 Mapping architecture (conceptual) 19 Figure 7 Direct control with normal security with status update positive case applied to gateway device . 79 Figure 8 Direct control with normal security with status update p
24、ositive case applied to IED . 80 Figure 9 Direct control with normal security in general negative case a) applied to gateway device . 80 Figure 10 Direct control with normal security in general negative case a) applied to IED . 81 Figure 11 Direct control with normal security in general negative cas
25、e b) applied to gateway device . 81 Figure 12 Direct control with normal security in general negative case b) applied to IED . 82 Figure 13 Direct control with normal security with status update negative case c) applied to gateway device . 82 Figure 14 Direct control with normal security with status
26、 update negative case c) applied to IED . 83 Figure 15 Direct control with normal security without status update positive case applied to gateway device . 83 Figure 16 Direct control with normal security without status update positive case applied to IED . 84 Figure 17 Direct control with enhanced s
27、ecurity positive case applied to gateway device 86 Figure 18 Direct control with enhanced security positive case applied to IED 87 Figure 19 Direct control with enhanced security negative case c) applied to gateway device . 88 Figure 20 Direct control with enhanced security negative case c) applied
28、to IED . 88 Figure 21 Direct control with enhanced security negative case d) applied to gateway device . 89 Figure 22 Direct control with enhanced security negative case d) applied to IED 89 Figure 23 SBOw control positive case applied to gateway device . 91 PD IEC/TS 61850-80-1:2016IEC TS 61850-80-
29、1:2016 IEC 2016 5 Figure 24 SBOw control positive case applied to IED . 91 Figure 25 SBOw control negative case a) applied to gateway device 92 Figure 26 SBOw control negative case a) applied to IED 92 Figure 27 SBOw control negative case b) applied to gateway device 93 Figure 28 SBOw control negati
30、ve case b) applied to IED 93 Figure 29 SBOw control negative case c) applied to gateway device 94 Figure 30 SBOw control negative case c) applied to IED 94 Figure 31 SBO with enhanced security positive case applied to gateway device . 95 Figure 32 SBO with enhanced security positive case applied to
31、IED . 96 Figure 33 SBO with enhanced security negative case a) applied to gateway device 96 Figure 34 SBO with enhanced security negative case a) applied to IED 97 Figure 35 SBO with enhanced security negative case b) applied to gateway device 97 Figure 36 SBO with enhanced security negative case b)
32、 applied to IED 98 Table 1 Mapping structure CDC onto ASDU type 20 Table 2 CDC: Single point status (SPS) 23 Table 3 CDC: Single point status (SPS) mapping 23 Table 4 CDC: Double point status (DPS) 24 Table 5 CDC: Double point status (DPS) mapping 24 Table 6 CDC: Integer status (INS) 25 Table 7 CDC:
33、 Integer status (INS) mapping 26 Table 8 CDC: Protection activated information (ACT) 27 Table 9 CDC: Protection activated information (ACT) mapping 28 Table 10 CDC: Protection activated information (ACD) . 30 Table 11 CDC: Directional protection activated information (ACD) mapping . 31 Table 12 CDC:
34、 Security violation counting (SEC) 33 Table 13 CDC: Security violation counting (SEC) mapping 33 Table 14 CDC: Binary counter reading (BCR) . 33 Table 15 CDC: Binary counter reading (BCR) mapping . 34 Table 16 CDC: Measured value (MV) . 35 Table 17 CDC: Measured value (MV) mapping 35 Table 18 CDC: C
35、omplex measured value (CMV) . 36 Table 19 CDC: Complex measured value (CMV) mapping . 37 Table 20 CDC: Phase to ground related measured values of a three-phase system (WYE) 38 Table 21 CDC: Phase to phase measured values of a three phase system (DEL) 39 Table 22 CDC: Sequence (SEQ) 40 Table 23 CDC:
36、Harmonic value (HMV) Ed.1 41 Table 24 CDC: Harmonic value (HMV) Ed.1 mapping 41 Table 25 CDC: Harmonic value (HMV) Ed.2 42 Table 26 CDC: Harmonic value for WYE (HWYE) Ed.1 . 43 Table 27 CDC: Harmonic value for WYE (HWYE) Ed.2 . 43 Table 28 CDC: Harmonic value for DEL (HDEL) 44 PD IEC/TS 61850-80-1:2
37、016 6 IEC TS 61850-80-1:2016 IEC 2016 Table 29 CDC: Harmonic value for DEL (HDEL) Ed.2 44 Table 30 CDC: Controllable single point (SPC) . 45 Table 31 CDC: Controllable single point (SPC) mapping . 46 Table 32 CDC: Controllable double point (DPC) 47 Table 33 CDC: Controllable double point (DPC) mappi
38、ng 48 Table 34 CDC: Controllable integer status (INC) . 49 Table 35 CDC: Controllable integer status (INC) mapping . 50 Table 36 CDC: Binary controlled step position information (BSC) 51 Table 37 CDC: Binary controlled step position information (BSC) mapping of data attributes of the functional cons
39、traint ST 52 Table 38 CDC: Binary controlled step position information (BSC) mapping of data attributes of the functional constraint CO . 53 Table 39 CDC: Integer-controlled step position information (ISC) 54 Table 40 CDC: Integer-controlled step position information (ISC) mapping 55 Table 41 CDC: C
40、ontrollable analogue set point information (APC) (Ed.1) 56 Table 42 CDC: Controllable analogue set point information (APC) (Ed.2) 57 Table 43 CDC: Controllable analogue set point information (APC) mapping of data attributes of the functional constraint MX . 58 Table 44 CDC: Controllable analogue set
41、 point information (APC) mapping of data attributes of the functional constraint SP . 59 Table 45 CDC: Single point setting (SPG) 60 Table 46 CDC: Integer status setting (ING) . 60 Table 47 CDC: Analogue settings (ASG) 61 Table 48 CDC: Enumerated status (ENS) . 62 Table 49 CDC: Enumerated status (EN
42、S) mapping . 63 Table 50 CDC: Histogramm (HST) 64 Table 51 CDC: Controllable enumerated status (ENC) 65 Table 52 CDC: Controllable enumerated status (ENC) mapping 66 Table 53 CDC: Enumerated status setting (ENG) 68 Table 54 CDC Binary controlled analog process value (BAC) 68 Table 55 CDC: Binary con
43、trolled analog process value (BAC) mapping of data attributes of the functional constraint MX . 69 Table 56 CDC: Curve shape setting CSG . 70 Table 57 Services requiring client/server communication profile 71 Table 58 Server services mapping 73 Table 59 Association services mapping 73 Table 60 Logic
44、al nodes services mapping . 74 Table 61 Data services mapping 75 Table 62 Setting group services mapping . 76 Table 63 Report control block services mapping . 77 Table 64 Direct control with normal security services mapping 85 Table 65 Direct control with enhanced security services mapping 90 Table
45、66 SBO control with enhanced security services mapping 99 Table A.1 Extension of the “P” element types to hold IEC 60870-5-101 information . 167 PD IEC/TS 61850-80-1:2016IEC TS 61850-80-1:2016 IEC 2016 7 Table A.2 Extension of the “P” element types to hold IEC 60870-5-104 information . 170 Table A.3
46、 Extension of the “P” element types using redundancy groups 171 PD IEC/TS 61850-80-1:2016 8 IEC TS 61850-80-1:2016 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION Part 80-1: Guideline to exchanging information from a CDC-based data
47、 model using IEC 60870-5-101 or IEC 60870-5-104 FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on
48、 all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the I
