1、 CAN/CGSB-4.2 No. 68-2004 ISO 105-J01:1997, IDT Supersedes CAN/CGSB-4.2 No. 68-92 ISO 105-J01:1989, IDT Reaffirmed October 2013 International Organization for Standardization National Standard of Canada ICS 59.080.01 ISO 1997. CGSB 2013. All rights reserved. Unauthorized reproduction is strictly pro
2、hibited. Textile test methods Textiles Tear properties of fabrics Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) (ISO 13937-1:2000, IDT) Textile test methods Textiles Tests for colourfastness Part J01: General principles for measurement of surface colour (ISO 105-J01
3、:1997, IDT) The CANADIAN GENERAL STANDARDS BOARD (CGSB), under whose auspices this standard has been developed, is a government agency within Public Works and Government Services Canada. CGSB is engaged in the production of voluntary standards in a wide range of subject areas through the media of st
4、andards committees and the consensus process. The standards committees are composed of representatives of relevant interests including producers, consumers and other users, retailers, governments, educational institutions, technical, professional and trade societies, and research and testing organiz
5、ations. Any given standard is developed on the consensus of views expressed by such representatives. CGSB has been accredited by the Standards Council of Canada as a national standards-development organization. The standards that it develops and offers as National Standards of Canada conform to the
6、criteria and procedures established for this purpose by the Standards Council of Canada. In addition to standards it publishes as National Standards of Canada, CGSB produces standards to meet particular needs, in response to requests from a variety of sources in both the public and private sectors.
7、Both CGSB standards and CGSB national standards are developed in conformance with the policies described in the CGSB Policy and Procedures Manual for the Development and Maintenance of Standards. CGSB standards are subject to review and revision to ensure that they keep abreast of technological prog
8、ress. CGSB will initiate the review of this standard within five years of the date of publication. Suggestions for their improvement, which are always welcome, should be brought to the notice of the standards committees concerned. Changes to standards are issued either as separate amendment sheets o
9、r in new editions of standards. An up-to-date listing of CGSB standards, including details on latest issues and amendments, and ordering instructions, is found in the CGSB Catalogue at our Web site www.tpsgc-pwgsc.gc.ca/ ongc-cgsb along with more information about CGSB products and services. Althoug
10、h the intended primary application of this standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose. The testing and evaluation of a product against this standard may require the use
11、 of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conju
12、nction with any applicable regulatory requirements prior to its use. CGSB neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever performed. Attention is drawn to the possibility that some of the elements of this Canadian stan
13、dard may be the subject of patent rights. CGSB shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility. Further information on CGSB and
14、its services and standards may be obtained from: The Manager Standards Division Canadian General Standards Board Gatineau, Canada K1A 1G6 The Standards Council of Canada (SCC) is the coordinating body of the Canadian standardization network, which is composed of people and organizations involved in
15、the development, promotion and implementation of standards. Through the collaborative efforts of Canadian standardization network members, standardization is helping to advance the social and economic well-being of Canada and to safeguard the health and safety of Canadians. The networks efforts are
16、overseen by SCC. The principal objectives of SCC are to foster and promote voluntary standardization as a means of advancing the national economy, supporting sustainable development, benefiting the health, safety and welfare of workers and the public, assisting and protecting the consumer, facilitat
17、ing domestic and international trade, and furthering international cooperation in relation to standardization. An important facet of the Canadian standards development system is the use of the following principles: consensus; equal access and effective participation by concerned interests; respect f
18、or diverse interests and identification of those who should be afforded access to provide the needed balance of interests; mechanism for dispute resolution; openness and transparency; open access by interested parties to the procedures guiding the standards development process; clarity with respect
19、to the processes; and Canadian interest consideration as the initial basis for the development of standards. A National Standard of Canada (NSC) is a standard prepared or reviewed by an SCC-accredited SDO and approved by the SCC according to NSC approval requirements. Approval does not refer to the
20、technical content of the standard, as this remains the responsibility of the SDO. An NSC reflects a consensus of a number of capable individuals whose collective interests provide, to the greatest practicable extent, a balance of representation of general interests, producers, regulators, users (inc
21、luding consumers) and others with relevant interests, as may be appropriate to the subject at hand. NSCs are intended to make a significant and timely contribution to the Canadian interest. Those who have a need to apply standards are encouraged to use NSCs. These standards are subject to periodic r
22、eview. Users of NSCs are cautioned to obtain the latest edition from the SDO that publishes the standard. The responsibility for approving standards as NSCs rests with: Standards Council of Canada 270 Albert Street, Suite 200 Ottawa, Ontario K1P 6N7, CANADA How to order Publications: by telephone 81
23、9-956-0425 or 1-800-665-2472 by fax 819-956-5740 by mail CGSB Sales Centre Gatineau, Canada K1A 1G6 in person Place du Portage Phase III, 6B1 11 Laurier Street Gatineau, Quebec by email ncr.cgsb-ongctpsgc-pwgsc.gc.ca on the Web www.tpsgc-pwgsc.gc.ca/ongc-cgsb NATIONAL STANDARD OF CANADA CAN/CGSB-4.2
24、 No. 68-2004 ISO 105-J01:1997 IDT Supersedes CAN/CGSB-4.2 No. 68-92 ISO 105-J01:1989, IDT Reaffirmed October 2013 Textile test methods Textiles Test for colourfastness Part J01: General principles for measurement of surface colour (ISO 105-J01:1997, IDT) CETTE NORME NATIONALE DU CANADA EST DISPONIBL
25、E EN VERSIONS FRANAISE ET ANGLAISE. Published January 2004 by the Canadian General Standards Board Gatineau, Canada K1A 1G6 HER MAJESTY THE QUEEN IN RIGHT OF CANADA, as represented by the Minister of Public Works and Government Services, the Minister responsible for the Canadian General Standards Bo
26、ard (2004). No part of this publication may be reproduced in any form without the prior permission of the publisher. Prepared by the International Organization for Standardization Reviewed by the Canadian General Standards Board Approved by the CAN/CGSB-4.2 No. 68-2004 ISO 105-J01:1997, IDT CGSB 201
27、3 All rights reserved CANADIAN GENERAL STANDARDS BOARD Committee on Textile Test Methods and Terminology (Voting membership at date of reaffirmation) General interest category Batcheller, J. University of Alberta Carrick, D. Consultant Davie, N. Consultant Liu, S. University of Manitoba Man, T.M. Co
28、nsultant Tait, C. National Defence/DSSPM Producer category Adam, C. Tencate Protective Fabrics Canada Boivin, D. E.I. DuPont Co. Lawson, L. Davey Textile Solutions Leblanc, J.-M. Marv Holland Apparel Ltd. Schumann, E. Lincoln Fabrics Ltd. Taylor, V. Invista (Canada) Co. Regulator category Andersson,
29、 C. Health Canada User category Bourget, S. National Defence/QETE DEntremont, E. Royal Canadian Mounted Police Izquierdo, V. Textile Technologies Centre Kohli, G. Sears Canada Inc. Larsen, A.-L. Exova Group Ltd. Litva, M. Canada Border Services Agency MacLeod, J. Public Works and Government Services
30、 Canada Tebbs, C. International Drycleaners Congress Secretary (non-voting) Grabowski, M. Canadian General Standards Board CGSB 2013 All rights reserved i CAN/CGSB-4.2 No. 68-2004 ISO 105-J01:1997, IDT Supersedes CAN/CGSB-4.2 No. 68-92 ISO 105-J01:1989, IDT Reaffirmed October 2013 Preface to the Nat
31、ional Standard of Canada This National Standard of Canada has been reaffirmed by the CGSB Committee on Textile Test Methods and Terminology and has been approved as a National Standard of Canada by the Standards Council of Canada. It is identical in content and in layout with International Standard
32、ISO 105-J01, Textiles Test for colour fastness Part J01: General principles for measurement of surface colour, published 1997-12-15 by the International Organization for Standardization (ISO), and is reprinted with the permission of ISO. The international standard was reviewed by the CGSB committee
33、to determine its suitability for Canadian use. It was agreed to use it in total without editorial changes. Throughout this standard, the words “National Standard of Canada” are to be understood as replacing the words “International Standard” wherever they appear. Some terminology and conventions are
34、 not identical to those used in other test methods within CAN/CGSB-4.2 Textile Test Methods. For example, the expression “colour fastness” is written in two words rather than in one word and the comma is used throughout this standard as a decimal marker rather than the point. The following National
35、Standard of Canada corresponds to the referenced ISO standard: CANADA ISO CAN/CGSB-4.2 No. 2 ISO 139 The testing and evaluation of a product against this method may require the use of materials and equipment that could be hazardous. This method does not purport to address all the safety aspects asso
36、ciated with its use. Anyone using this method has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prior to its use. The CGSB National Standards of Canada may be obtained from
37、 the Canadian General Standards Board, Sales Centre, Gatineau, Canada K1A 1G6. Telephone 819-956-0425 or 1-800-665-2472. Fax 819-956-5740. E-mail ncr.cgsb-ongctpsgc-pwgsc.gc.ca. Web site www.tpsgc-pwgsc.gc.ca/ongc-cgsb. The International Standards may be obtained from IHS Global Canada Ltd., 200-133
38、1 MacLeod Trail SE, Calgary, Alberta T2G 0K3, telephone 613-237-4250 or 1-800-267-8220, fax 613-237-4251, Web site .AReference numberISO 105-J01:1997(E)INTERNATIONALSTANDARDISO105-J01Fourth edition1997-12-15Textiles Tests for colour fastness Part J01:General principles for measurement of surfacecolo
39、urTextiles Essais de solidit des teintures Partie J01: Principes gnraux du mesurage de la couleur de surfaceISO 105-J01:1997(E) ISO 1997All rights reserved. Unless otherwise specified, no part of this publication may be reproducedor utilized in any form or by any means, electronic or mechanical, inc
40、luding photocopying andmicrofilm, without permission in writing from the publisher.International Organization for StandardizationCase postale 56 CH-1211 Genve 20 SwitzerlandInternet centraliso.chX.400 c=ch; a=400net; p=iso; o=isocs; s=centralPrinted in SwitzerlandiiForewordISO (the International Org
41、anization for Standardization) is a worldwidefederation of national standards bodies (ISO member bodies). The work ofpreparing International Standards is normally carried out through ISOtechnical committees. Each member body interested in a subject for whicha technical committee has been established
42、 has the right to be representedon that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISOcollaborates closely with the International Electrotechnical Commission(IEC) on all matters of electrotechnical standardization.Draft
43、 International Standards adopted by the technical committees arecirculated to the member bodies for voting. Publication as an InternationalStandard requires approval by at least 75 % of the member bodies castinga vote.International Standard ISO 105-J01 was prepared by Technical CommitteeISO/TC 38, T
44、extiles, Subcommittee SC 1, Tests for coloured textiles andcolorants.This fourth edition cancels and replaces the third edition(ISO 105-J01:1989), which has been technically revised.ISO 105 was previously published in thirteen “parts”, each designated by aletter (e.g. “Part A”), with publication dat
45、es between 1978 and 1985. Eachpart contained a series of “sections”, each designated by the respectivepart letter and by a two-digit serial number (e.g. “Section A01”). Thesesections are now being republished as separate documents, themselvesdesignated “parts” but retaining their earlier alphanumeri
46、c designations. Acomplete list of these parts is given in ISO 105-A01.Annex A forms an integral part of this part of ISO 105. Annex B is forinformation only.INTERNATIONAL STANDARD ISO ISO 105-J01:1997(E)1Textiles Tests for colour fastness Part J01:General principles for measurement of surface colour
47、1 ScopeThis part of ISO 105 is designed as a reference document to support the proper measurement of the colourof specimens by instrumental means as required in many parts of ISO 105. The document describesgeneral concepts and problems associated with reflectance colour measurement.Annex A specifies
48、 techniques and specimen handling procedures.2 Normative referencesThe following standards contain provisions which, through reference in this text, constitute provisionsof this part of ISO 105. At the time of publication, the editions indicated were valid. All standards aresubject to revision, and
49、parties to agreement based on this part of ISO 105 are encouraged to investigatethe possibility of applying the most recent editions of the standards indicated below. Members of IEC andISO maintain registers of currently valid International Standards.ISO 139:1973, Textiles Standard atmospheres for conditioning and testing.CIE Publication No. 15.2, Colorimetry, 2nd ed. (1986)1).3 DefinitionsFor the purposes of this part of ISO 105, the following definitions apply.3.1 colour measurement: A numerical repr
