1、Medical electrical equipment Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screeningAppareils lectromdicaux Partie2-59: Exigences particulires pour la scurit de base et les performances essentielles des image
2、urs thermiques pour le dpistage des humains fbrilesCAN/CSA-C22.2 No. 80601-2-59-10(IEC 80601-2-59:2008, IDT)National Standard of CanadaNorme nationale du CanadaNOT FOR RESALE.PUBLICATION NON DESTINE LA REVENTE.Corrigendum 1Medical electrical equipment Part 2-59: Particular requirements for the basic
3、 safety and essential performance of screening thermographs for human febrile temperature screeningCorrigendum 1Appareils lectromdicaux Partie 2-59 : Exigences particulires pour la scurit de base et les performances essentielles des imageurs thermiques pour le dpistage des humains fbrilesCorrigendum
4、 1:2011 (IDT) to National Standard of CanadaCorrigendum 1:2011 (IDT) la Norme nationale du CanadaCAN/CSA-C22.2 No. 80601-2-59-10(IEC 80601-2-59:2008, IDT)NOT FOR RESALE.PUBLICATION NON DESTINE LA REVENTE.CSA Standards Update ServiceCorrigendum 1:2011 toCAN/CSA-C22.2 No. 80601-2-59-10June 2011Title:
5、Medical electrical equipment Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screeningPagination: 2 pagesTo register for e-mail notification about any updates to this publicationgo to www.ShopCSA.caclick on E-m
6、ail Services under MY ACCOUNTclick on CSA Standards Update ServiceThe List ID that you will need to register for updates to this publication is 2420269.If you require assistance, please e-mail techsupportcsa.ca or call 416-747-2233.Visit CSAs policy on privacy at www.csagroup.org/legal to find out h
7、ow we protect your personal information.Service de mise jour desnormesCSACorrigendum 1:2011 laCAN/CSA-C22.2 n 80601-2-59-10Juin 2011Titre : Appareils lectromdicaux Partie 2-59 : Exigences particulires pour la scurit de base et les performances essentielles des imageurs thermiques pour le dpistage de
8、s humains fbrilesNombre de pages : 2 pagesVous devez vous inscrire pour recevoir les avis transmis par courriel au sujet des mises jour apportes ce document :allez au www.ShopCSA.cacliquez sur Services par courriel en dessous de MON COMPTEcliquez sur Service de mise jour des normes CSA Le numro dide
9、ntification dont vous avez besoin pour vous inscrire pour les mises jour apportes ce document est le 2420269.Si vous avez besoin daide, veuillez nous contacter par courriel au techsupportcsa.ca ou par tlphone au 416-747-2233.Consultez la politique de la CSA en matire de confidentialit au www.csagrou
10、p.org/legal pour savoir comment nous protgeons vos renseignements personnels.April 2009 Avril 2009 IEC 80601-2-59 (First edition 2008) Medical electrical equipment Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperatur
11、e screening CEI 80601-2-59 (Premire dition 2008) Appareils lectromdicaux Partie 2-59: Exigences particulires pour la scurit de base et les performances essentielles des imageurs thermiques pour le dpistage des humains fbriles CORRIGENDUM 1 Page 7 2 Normative references In the addition, instead of: I
12、SO/TR 80600, Medical Electrical Equipment Deployment, implementation and operational guidelines for identifying febrile humans using a screening thermograph 3) 3) To be published read: ISO/TR 13154, Medical electrical equipment Deployment, implementation and operational guidelines for identifying fe
13、brile humans using a screening thermograph Page 41 2 Rfrences normatives Dans laddition, au lieu de: CEI ISO/TR 80600, Appareils lectromdicaux Dploiement, mise en uvre et lignes directrices oprationnelles pour identifier les humains fbriles laide dun imageur thermique 3) 3) A publier. lire: ISO/TR 1
14、3154, quipement lectrique mdical Dploiement, mise en oeuvre et lignes directrices oprationnelles pour lidentification dtres humains fbriles en utilisant un thermographe de criblage Page 11 201.7.9.3.101 SCREENING THERMOGRAPH In item a), instead of .a reference to ISO/TR 80600. read: .a reference to
15、ISO/TR 13154. Page 45 201.7.9.3.101 IMAGEUR THERMIQUE Dans le point a), au lieu de : une rfrence lISO/TR 80600, Appareils lectromdicaux Dploiement, mise en oeuvre et lignes directrices oprationnelles pour identifier les humains fbriles laide dun imageur thermique lire: Corrigendum 1:2011 to CAN/CSA-
16、C22.2 No. 80601-2-59-10April 2009 Avril 2009 une rfrence lISO/TR 13154, quipement lectrique mdical Dploiement, mise en oeuvre et lignes directrices oprationnelles pour lidentification dtres humains fbriles en utilisant un thermographe de criblage Page 19 Table 201.C.102 In the sixth row, instead of
17、: Reference to IEC ISO/TR 80600. read: Reference to ISO/TR 13154 Page 54 Tableau 201.C.102 Dans la sixime ligne, au lieu de: Rfrence la CEI ISO/TR 80600, Appareils lectromdicaux Dploiement, mise en oeuvre et lignes directrices oprationnelles pour identifier les humains fbriles laide dun imageur ther
18、mique lire: Rfrence lISO/TR 13154, quipement lectrique mdical Dploiement, mise en oeuvre et lignes directrices oprationnelles pour lidentification dtres humains fbriles en utilisant un thermographe de criblage Corrigendum 1:2011 to CAN/CSA-C22.2 No. 80601-2-59-10ICS 11.040.55 Copyright NoticeThis Am
19、endment to the International Standard contains information copyright protected by the International Electrotechnical Commission (IEC). Except as permitted under the laws of Canada, no extract of this Amendment to the International Standard may be reproduced, stored in any retrieval system, or transm
20、itted in any form or by any means, electronic, photocopying, recording, or otherwise, without prior permission from the Standards Council of Canada (SCC). Requests for permission to reproduce this Amendment to the International Standard or parts thereof should be addressed to Manager, Technical Docu
21、ment Centre Standards Council of Canada 270 Albert Street, Suite 200 Ottawa, Ontario K1P 6N7 The Canadian adoption of this Amendment to the International Standard contains information copyright protected by the Canadian Standards Association. All rights reserved. No part of this adopted Amendment ma
22、y be reproduced in any form whatsoever without the prior permission of the publisher. IEC material is reprinted with permission. Requests for permission to reproduce this adopted Amendment or parts thereof should be addressed to Manager, Sales Canadian Standards Association 5060 Spectrum Way, Suite
23、100 Mississauga, Ontario L4W 5N6Copyright violators will be prosecuted to the full extent of the law. Avis de droits dauteur Cet amendement la Norme internationale contient des renseignements qui sont la proprit de la Commission lectrotechnique Internationale (CEI) et qui sont protgs par des droits
24、dauteur. Sous rserve de ce qui est permis par les lois du Canada, aucune partie de cet amendement la Norme internationale ne peut tre reproduite, conserve dans un systme dextraction ou transmise dans quelque format que ce soit et par quelque moyen que ce soit, lectronique, photocopie, enregistrement
25、 ou autre, sans la permission pralable du Conseil canadien des normes (CCN). Les demandes dautorisation de reproduction de cet amendement la Norme internationale ou de parties de cet amendement devraient tre adresses : Chef, Centre de documentation technique Conseil canadien des normes 270, rue Albe
26、rt, bureau 200 Ottawa (Ontario) K1P 6N7 Cette modification adopte par le Canada contient des renseignements qui sont la proprit de lAssociation canadienne de normalisation et qui sont protgs par les droits dauteur. Tous droits rservs. Aucune partie de cette modification adopte ne peut tre reproduite
27、 par quelque moyen que ce soit sans la permission pralable de lorganisme qui la publie. Le matriel appartenant la CEI est reproduit avec la permission de la CEI. Les demandes dautorisation de reproduction de cette modification adopte ou de parties de cette modification devraient tre adresses : Chef,
28、 Ventes Association canadienne de normalisation 5060, Spectrum Way, bureau 100 Mississauga (Ontario) L4W 5N6 Toute personne qui se rend coupable dune infraction lgard du droit dauteur sera poursuivie dans toute la mesure permise par la loi. PRINTED IN CANADAIMPRIMEAU CANADA100%The Canadian Standards
29、 Association (CSA) prints its publications on Rolland Enviro100, which contains 100% recycled post-consumer fibre, is EcoLogo and Processed Chlorine Free certified, and was manufactured using biogas energy.LAssociation canadienne de normalisation (CSA) imprime ses documents sur du papier Rolland Env
30、iro100. Il sagit dun papier homologu co-Logo qui a t fabriqu 100 % avec des fibres postconsommation par un processus aliment au biogaz et trait selon un procd certifi sans chlore.CSA Standards Update ServiceCAN/CSA-C22.2 No. 80601-2-59-10March 2010Title:Medical electrical equipment Part2-59: Part ic
31、ular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screeningPagination:82 pages (CSA/1CSA/13 and 69 text)To register for e-mail notification about any updates to this publicationgo to www.ShopCSA.caclick on E-mail Services under M
32、Y ACCOUNTclick on CSA Standards Update ServiceThe List ID that you will need to register for updates to this publication is 2420269.If you require assistance, please e-mail techsupportcsa.ca or call 416-747-2233.Visit CSAs policy on privacy at www.csagroup.org/legal to find out how we protect your p
33、ersonal information.Service de mise jour desnormesCSACAN/CSA-C22.2 n 80601-2-59-10Mars 2010Titre :Appareils lectromdicaux Pa rtie2-59: Exigences particulires pour la scurit de base et les performances essentielles des imageurs thermiques pour le dpistage des humains fbrilesNombre de pages :82 pages
34、(CSA/1 CSA/13 et 69 pages de texte)Vous devez vous inscrire pour recevoir les avis transmis par courriel au sujet des mises jour apportes ce document :allez au www.ShopCSA.cacliquez sur Services par courriel en dessous de MON COMPTEcliquez sur Service de mise jour des normes CSA Le numro didentifica
35、tion dont vous avez besoin pour vous inscrire pour les mises jour apportes ce document est le 2420269.Si vous avez besoin daide, veuillez nous contacter par courriel au techsupportcsa.ca ou par tlphone au 416-747-2233.Consultez la politique du CSA en matire de confidentialit au www.csagroup.org/lega
36、l pour savoir comment nous protgeons vos renseignements personnels.Legal Notice for StandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representin
37、g varied viewpoints and interests to achieve consensus and develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis
38、 document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third p
39、artys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CS
40、A, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, B
41、USINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIB
42、ILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The info
43、rmation in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA is a private not-for-profi
44、t company that publishes voluntary standards and related documents. CSA has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA and the users of this document (whether it b
45、e in printed or electronic form), CSA is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such
46、 inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or other
47、s to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of
48、 patent rights. CSA shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document if
