CSN 01 8025-1987 Tourist marking《旅游标识》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS ISO 13951-2015 Plastics piping systems Test method for the resistance of plastic pipe pipe or pipe fitting assemblies to tensile loading《塑料管系统 塑料管 管或管 配件总成抗拉伸载荷的试验方法》.pdf

BS ISO 13953-2001 Polyethelene (PE) pipes and fittings - Determination of the tensile strength and failure mode of test pieces from a butt-fused joint《聚乙烯管道和配件 根据对焊接头对试样的抗拉强度和断裂模式的.pdf

BS ISO 13956-2010 Plastics pipes and fittings Decohesion test of polyethylene (PE) saddle fusion joints Evaluation of ductility of fusion joint interface by tear test《塑料管道和配件 聚乙烯(P.pdf

BS ISO 13970-2012 Recreational diving services Requirements for the training of recreational snorkelling guides《娱乐潜水服务 使用水下呼吸管潜行导游培训要求》.pdf

BS ISO 13971-2012 Refrigeration systems and heat pumps Flexible pipe elements vibration isolators expansion joints and non-metallic tubes Requirements and classification《制冷系统和热泵 软管.pdf

BS ISO 13975-2012 Plastics Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems Method by measurement of biogas produc.pdf

BS ISO 13976-2016 Hot-rolled steel sheet in coils of structural quality and heavy thickness《结构质量和特厚的成卷热轧钢薄板》.pdf

BS ISO 13985-2007 Liquid hydrogen - Land vehicle fuel tanks《液态氢 地面车辆燃料箱》.pdf

BS ISO 13988-2008 Passenger vehicle wheels - Clip balance weight and rim flange nomenclature test procedures and performance requirements《客车车轮 夹片配重和轮辋凸缘术语、试验程序和性能要求》.pdf