CSN 21 0318-1985 Forming machines Automatic bottom drive blanking press Geometrical accuracy《底端驱动自动冲割压力机几何精度》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JIS Z 3313-1999 焊接材料标准.pdf

JIS Z 3313-2006(追補)焊接材料标准.pdf

JIS Z 3313-2009 Flux cored wires for gas shielded and self-shielded metal arc welding of mild steel, high strength steel and low temperature service steel.pdf

JIS Z 3316-2001 低碳钢及低合金钢用钨极惰性气体保护电弧焊焊条及焊丝.pdf

JIS Z 3318-1999 AMD 1-2007 钼钢和铬钼铸钢用MAG焊料带芯焊丝.pdf

JIS Z 3318：1999 MAG welding flux cored wires for molybdenum steel and chromium molybdenum steel.pdf

JIS Z 3319-1999 AMD 1-2007 气电弧焊用焊料带芯焊丝(修改件1).pdf

JIS Z 3319-1999 气体保护电弧焊用药芯焊丝.pdf

JIS Z 3320-1999 AMD 1-2007 耐大气腐蚀钢的二氧化碳气体保护弧焊用.pdf