CSN 24 1217-1984 Spot-facing cutters holders《孔口平面刀具架》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS ISO 13319-2007 Determination of particle size distributions Electrical sensing zone method《粒度分布的测定 电感区法》.pdf

BS ISO 13322-1-2014 Particle size analysis Image analysis methods Static image analysis methods《粒度分析 图象分析方法 静态图象分析方法》.pdf

BS ISO 13322-2-2006 Particle size analysis - Image analysis methods - Dynamic image analysis methods《粒度分析 图像分析法 静态图像分析法》.pdf

BS ISO 13332-2001 Reciprocating internal combustion engines - Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal往.pdf

BS ISO 13338-2017 Gas cylinders Gases and gas mixtures Determination of tissue corrosiveness for the selection of cylinder valve outlets《气瓶 气体和气体混合物 钢瓶阀门出口选择中组织腐蚀性的测定》.pdf

BS ISO 13347-2-2004 Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Reverberant room method《工业风扇 标准实验室条件下风扇声功率级的测定 混响室法》.pdf

BS ISO 13347-4-2004 Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Sound intensity method《工业用风扇 标准化实验室条件下风扇声功率级的测定 声强法》.pdf

BS ISO 13357-1-2017 Petroleum products Determination of the filterability of lubricating oils Procedure for oils in the presence of water《石油产品 润滑油可过滤性测定 含水油过滤的程序》.pdf

BS ISO 13357-2-2017 Petroleum products Determination of the filterability of lubricating oils Procedure for dry oils《石油产品 润滑油可过滤性测定 干油规程》.pdf