CSN 48 0007-1959 Volume tables for logs according the middle diameter《根据中部厚度的圆木的体积表》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AGMA 2000FTM5-2000 Systematic Investigations on the Influence of Viscosity Index Improvers on EHL-Film Thickness《粘度指数改善剂对薄膜厚度影响的系统调查》.pdf

AGMA 2000FTM6-2000 Did the Natural Convection Exist in Mechanical Power Transmissions Theoretical and Experimental Results《在机械动力传输中是否存在自然对流？理论结果和实验结果》.pdf

AGMA 2000FTM7-2000 Analytical - FEM Tool for the Design and Optimization of Aerospace Gleason Spiral Bevel Gears《航空航天格里森螺旋锥齿轮设计和优化用分析-FEM工具》.pdf

AGMA 2000FTM8-2000 Stock Distribution Optimization in Fixed Setting Hypoid Pinions《固定安装双曲线齿轮上床头箱分布的优化》.pdf

AGMA 2000FTM9-2000 Cylindrical and Bevel Gear Inspection - a Simple Task Using Dedicated CNC - Controlled Gear Inspection Machines《圆柱齿轮和锥齿轮检查.使用专业CNC的简单工作.控制齿轮检查机械》.pdf

AGMA 2000FTMS1-2000 Effects of Helix Slope and Form Deviation on the Contact and Fillet Stresses of Helical Gears《螺旋斜度和形状偏离对螺旋齿轮接触和圆角应力的影响》.pdf

AGMA 2001-D04-2004 Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth《渐开线正齿轮齿和斜齿轮螺旋齿的基本额定因数和计算方法》.pdf

AGMA 2002-C16-2016 Tooth Thickness and Backlash Measurement of Cylindrical Involute Gearing.pdf

AGMA 2003-C10-2010 Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel Zerol Bevel and Spiral Bevel Gear Teeth《直锥 锥齿轮和螺旋锥齿轮轮齿的耐点蚀和弯曲强度评价》.pdf